Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-WLCSP (0.76x0.76)

Single Port PoE/PoE+/LTPoE++ PSE Controller Features: Compliant with IEEE 802.3at Type 1 and 2 Supports LTPoE++® Up to 90W Supports Dual-Signature PDs Fully Autonomous Operation without Microcontroller Very Low Power Dissipation 0.1Ω Sense Resistance Low RDS(ON) External MOSFET Very High Reliability 4-Point PD Detection 2-Point Forced Voltage and Forced Current Robust Short-Circuit Protection Cable Surge Protected ±80V OUT pin Classification Dependent ICUT and ILIM Current Thresholds Supports 2-Pair and 4-Pair Output Power UltraPWR Mode Supports Custom PDs up to 123W Pin-Selectable Detection Backoff Timer for Midspans Pin Programmable Legacy PD Detection Pin Programmable Maximum Power Mode Status LED Pin Available in 20-Pin QFN and 16-Pin SO Packages

Up to 1 GHz Dual-SHARC+ DSP w/ Integrated Arm Cortex-A5 Features:SHARC+ Core Infrastructure 800 MHz (max) or 1 GHz (max) Core clock frequency 2x 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedArm Core Infrastructure: 1 GHz Arm Cortex-A5 (with Neon/FPU) 32 kByte/32 kByte L1 Instr./Data Cache 256 kByte L2 CacheMemory 2048 KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices)16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 8x Precision Clock Generators 2x 4-channel PDM Mic Inputs 40 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin / 6-pin 6x I2C,3x UARTs 2x Link Ports 16x General Purpose Timer, 1x General Purpose Counter 3x Watchdog Timers ePPI USB 2.0 HS OTG Controller 10/100 EMAC 10/100/1000 EMAC w/AVB and 1588 2x CAN FD 8-ch 12bit Housekeeping ADC 135 GPIO pins, 40 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball FCBGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

OVP and EMI Protected, Precision, Low Noise and Bias Current Single Op Amp Features: Low offset voltage: 60 μV maximum at 25°C (8-lead and 14-lead SOIC) Low offset voltage drift: 1 μV/°C maximum (8-lead and 14-lead SOIC) Low input bias current: 1 nA maximum at 25°C Low voltage noise density: 8 nV/√Hz typical at 1 kHz Large signal voltage gain (AVO): 100 dB minimum over full supply voltage and operating temperature Input overvoltage protection to 32 V above and below the supply voltage rail Integrated EMI filter 70 dB typical rejection at 1000 MHz 90 dB typical rejection at 2400 MHz Rail-to-rail output swing Low supply current: 500 μA typical per amplifier Wide bandwidth Gain bandwidth product (AV = 100): 3.5 MHz typical Unity-gain crossover (AV = 1): 3.5 MHz typical −3 dB bandwidth (AV = 1): 6 MHz typical Dual-supply operation Specified at ±5 V to ±15 V, operates over ±2.5 V to ±18 V Unity-gain stable No phase reversal Long-term offset voltage drift (10,000 hours): 2 μV typical Temperature hysteresis: 2 μV typical

The AD8183 (G = +1) and AD8185 (G = +2) are high speed Triple 2-to-1 multiplexers. They offer -3 dB full signal bandwidth up to 360 MHz along with slew rate in excess of 1000 V/µs. With better than -72 dB of all hostile crosstalk and 100 dB of isolation, they are useful in many high speed applications. The differential gain and differential phase error of 0.01% and 0.02°, along with 0.1 dB flatness to 90 MHz make AD8183 and AD8185 ideal for professional video and LCD multiplexing. They offer 15 ns switching time making them an excellent choice for switching video signals, while consuming less than 25 mA on ±5 V supply voltage.

The AD5700/AD5700-1 are single-chip solutions, designedand specified to operate as a HART® FSK half-duplex modem,complying with the HART physical layer requirements. TheAD5700/AD5700-1 integrate all of the necessary filtering, signaldetection, modulating, demodulating and signal generationfunctions, thus requiring few external components. The 0.5%precision internal oscillator on the AD5700-1 greatly reducesthe board space requirements, making it ideal for line-poweredapplications in both master and slave configurations. The maximumsupply current consumption is 115µA, making theAD5700/AD5700-1 an optimal choice for low power loop-powered applications.Transmit waveforms are phase continuous 1200 Hz and2200 Hz sinusoids. The AD5700/AD5700-1 contain accuratecarrier detect circuitry and use a standard UART interface.Applications Field transmitters HART multiplexers PLC and DCS analog I/O modules HART network connectivity

Quad-Channel, Software Configurable Input and Output Features: Quad-channel software configurable input/output circuit Screw terminals tolerant to ±40 V dc Line protectors to block power from the screw terminals to supplies User configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal 16-bit, Σ- ADC with optional 50 Hz and 60 Hz rejection 13-bit monotonic DACs Charge pump for true zero voltage output HART-compatible Internal temperature sensor, ±5°C accuracy On-chip diagnostics including open circuit and short-circuit detection SPI-compatible Temperature range: −40°C to +105°C 64-lead LFCSP

Analog to Digital Converters - ADC Isolated Sensor (Use with 71M654x)

Metering Systems on a Chip - SoC Residential Energy Meter IC

3 Phase Meter IC 8-SOIC