Octal LNA/VGA/AAF/ADC and Crosspoint Switch Features: 8 channels of LNA, VGA, AAF, and ADC Low noise preamplifier (LNA) - See data sheet for additional information Variable gain amplifier (VGA) - See data sheet for additional information Antialiasing filter (AAF) - See data sheet for additional information Analog-to-digital converter (ADC) - See data sheet for additional information Includes an 8 × 8 differential crosspoint switch to support continuous wave (CW) Doppler Low power, 195 mW per channel at 12 bits/40 MSPS (TGC) See data sheet for additional features

RF Amplifier 4 Watt pow amp Chip 12 - 16 GHz

ADI

ADI

ADI

ADI

The AD9683 is a 14-bit ADC with sampling speeds of up to250 MSPS. The AD9683 supports communications applicationswhere low cost, small size, wide bandwidth, and versatility aredesired.The ADC core features a multistage, differential pipelinedarchitecture with integrated output error correction logic. TheADC core features wide bandwidth inputs supporting a varietyof user-selectable input ranges. An integrated voltage referenceeases design considerations. A duty cycle stabilizer (DCS) isprovided to compensate for variations in the ADC clock duty cycle,allowing the converter to maintain excellent performance. TheJESD204B high speed serial interface reduces board routingrequirements and lowers pin count requirements for thereceiving device.The ADC output data is routed directly to the JESD204B serialoutput lane. These outputs are at CML voltage levels. Data can besent through the lane at the maximum sampling rate of 250 MSPS,which results in a lane rate of 5 Gbps. Synchronization inputs(SYNCINB± and SYSREF±) are provided.Flexible power-down options allow significant power savings,when desired. Programmable overrange level detection issupported via the dedicated fast detect pins.Programming for setup and control is accomplished using a3-wire SPI-compatible serial interface.The AD9683 is available in a 32-lead LFCSP and is specifiedover the industrial temperature range of −40°C to +85°C.Product Highlights Integrated 14-bit, 170 MSPS/250 MSPS ADC. The configurable JESD204B output block supports lane rates up to 5 Gbps. An on-chip, phase-locked loop (PLL) allows users to provide a single ADC sampling clock; the PLL multiplies the ADC sampling clock to produce the corresponding JESD204B data rate clock. Support for an optional radio frequency (RF) clock input to ease system board design. Proprietary differential input maintains excellent SNR performance for input frequencies of up to 400 MHz. Operation from a single 1.8 V power supply. Standard serial port interface (SPI) that supports various product features and functions, such as controlling the clock DCS, power-down, test modes, voltage reference mode, overrange fast detection, and serial output configuration.Applications Communications Diversity radio systems Multimode digital receivers (3G) TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM, EDGE, LTE DOCSIS 3.0 CMTS upstream receive paths HFC digital reverse path receivers Smart antenna systems Electronic test and measurement equipment Radar receivers COMSEC radio architectures IED detection/jamming systems General-purpose software radios Broadband data applications Ultrasound equipment

The AD9837 is a low power, programmable waveform generatorcapable of producing sine, triangular, and square wave outputs.Waveform generation is required in various types of sensing,actuation, and time domain reflectometry (TDR) applications. The outputfrequency and phase are software programmable, allowing easytuning. The frequency registers are 28 bits: with a 16 MHz clock rate, resolution of 0.06 Hz can be achieved; with a 5 MHz clock rate, the AD9837can be tuned to 0.02 Hz resolution.The AD9837 is written to via a 3-wire serial interface. This serialinterface operates at clock rates up to 40 MHz and is compatiblewith DSP and microcontroller standards. The device operateswith a power supply from 2.3 V to 5.5 V.The AD9837 has a power-down (SLEEP) function. Sections of the device that are not being used can be powered down to minimize the current consumption of the part. For example, the DAC can be powered down when a clock output is being generated.The AD9837 is available in a 10-lead LFCSP_WD package.APPLICATIONS Frequency stimulus/waveform generation Liquid and gas flow measurement Sensory applications: proximity, motion, and defect detection Line loss/attenuation Test and medical equipment Sweep/clock generators Time domain reflectometry (TDR) applications

The AD9914 is a direct digital synthesizer (DDS) featuring a 12‑bit DAC. The AD9914 uses advanced DDS technology, coupled with an internal high speed, high performance DAC to form a digitally programmable, complete high frequency synthesizer capable of generating a frequency-agile analog output sinusoidal waveform at up to 1.4 GHz. The AD9914 enables fast frequency hopping and fine tuning resolution (64‑bit capable using programmable modulus mode). The AD9914 also offers fast phase and amplitude hopping capability. The frequency tuning and control words are loaded into the AD9914 via a serial or parallel input/output port.The AD9914 also supports a user defined linear sweep mode of operation for generating linear swept waveforms of frequency, phase, or amplitude. A high speed, 32-bit parallel data input port is included, enabling high data rates for polar modulation schemes and fast reprogramming of the phase, frequency, and amplitude tuning words.The AD9914 is specified to operate over the extended industrial temperature range (see the Absolute Maximum Ratings section in the data sheet).APPLICATIONS Agile LO frequency synthesis Programmable clock generator FM chirp source for radar and scanning systems Test and measurement equipment Acousto-optic device drivers Polar modulator Fast frequency hopping

The single ADA4077-1, dual ADA4077-2, and quad ADA4077-4amplifiers feature extremely low offset voltage and drift, and lowinput bias current, noise, and power consumption. Outputs are stable with capacitive loads of more than 1000 pF with no external compensation.Applications for this amplifier include sensor signal conditioning (such as thermocouples, resistance temperature detectors (RTDs),strain gages), process control front-end amplifiers, and precisiondiode power measurement in optical and wireless transmission systems. The ADA4077-1/ADA4077-2/ADA4077-4 are useful in line powered and portable instrumentation, precision filters,and voltage or current measurement and level setting.Unlike other amplifiers, the ADA4077-1/ADA4077-2/ADA4077-4 have an MSL1 rating that is compliant with the most stringent of assembly processes, and they are specified over theextended industrial temperature range from −40°C to +125°C for the most demanding operating environments.APPLICATIONS Process control front-end amplifiers  Optical network control circuits Instrumentation Precision sensors and controls Precision filters