Precision, Rail-to-Rail Input Current Sense Amplifier Features: Very Wide, Over-the-Top®, Input Common Mode Range   - Extends 44V Above V – (Independent of V +)   - Extends –0.3V Below V – Wide Power Supply Range: 2.85V to 36V Input Offset Voltage: 300µV Maximum Gain Accuracy: 1% Max Gain Congurable with External Resistors Operating Current: 150µA Slew Rate: 2V/µs Sense Input Current When Powered Down: 1nA Full-Scale Output Current: 1mA Minimum Operating Temperature Range –40°C to 125°C Available in 2mm × 3mm DFN and 8-Lead MSOP Packages

2-Phase Step-Up DC/DC Controller Features: 2-Phase Operation Reduces Required Input and Output Capacitance Programmable Switching Frequency: 150kHz to 500kHz 6V to 40V Input Range 10V Gate Drive with VCC ≥13V High Current Gate Drive (4A) Programmable Soft-Start and Current Limit Programmable Slope Compensation for High Noise Immunity MOSFET Gate Signals with Programmable Falling Edge Delay for External Synchronous Drivers Programmable Undervoltage Lockout Programmable Duty Cycle Clamp (50% or Higher) Thermally Enhanced 28-Lead TSSOP and 4mm x 5mm QFN Packages

Low Noise, 0.5% Tolerance, 5MHz to 28MHz, Pin Configurable Filter/ADC Driver Features: Pin Configurable Gain and Filter Response Up to 28MHz Few External Components Required Resistors Trimmed to 0.5% Typical Capacitors Trimmed to 0.5% Typical Very Low Noise: 80dB S/N in 100MHz Bandwidth Very Low Distortion (2VP-P): 1MHz: –100dBc 2nd, –123dBc 3rd 10MHz: –72dBc 2nd, –103dBc 3rd Adjustable Output Common Mode Voltage Rail-to-Rail Output Swing Power Configurability and Low Power Shutdown Tiny 0.75mm 20-Lead (4mm × 4mm) QFN Package

Full-Featured LED Driver with 1.5A Switch Current Features: 5000:1 True Color PWM™ Dimming Ratio 1.5A, 45V Internal Switch 100mV High Side Current Sense Open LED Protection Adjustable Frequency: 250kHz to 2.5MHz Wide Input Voltage Range: Operation from 3V to 30V Transient Protection to 40V Operates in Boost, Buck Mode and Buck-Boost Mode Gate Driver for PMOS LED Disconnect Constant-Current and Constant-Voltage Regulation CTRL Pin Provides 10:1 Analog Dimming Low Shutdown Current: <1μA Available in (4mm × 4mm) 16-Lead QFN and 16-Pin TSSOP Packages

Ultralow EMI 28VIN, 6A DC/DC Module Regulator Features: Complete Low EMI Switch Mode Power Supply Wide Input Voltage Range: 4.5V to 28V 6A DC Typical, 8A Peak Output Current 0.6V to 5V Output Voltage Range EN55022 Class B Certified Output Voltage Tracking and Margining PLL Frequency Synchronization ±1.75% Total DC Error Power Good Output Current Foldback Protection (Disabled at Start-Up) Parallel/Current Sharing Current Mode Control Up to 93% Efficiency at 5VIN, 3.3VOUT Programmable Soft-Start Output Overvoltage Protection –55°C to 125°C Operating Temperature Range (LTM4606MP) SnPb or RoHS Compliant Finish 15mm × 15mm × 2.82mm LGA Package 15mm × 15mm × 3.42mm BGA Package

Secondary-Side Synchronous Forward Controller Features: Secondary-Side Control for Fast Transient Response Self-Starting Architecture Eliminates Need for Separate Bias Regulator Proprietary Gate Drive Encoding Scheme Reduces System Complexity Current Mode Control Ensures Current Sharing PLL Fixed Frequency: 100kHz to 500kHz ±1% Output Voltage Accuracy OPTI-LOOP Compensation Available in a Narrow 16-Lead SSOP Package

Single Switch Synchronous Forward Controller Features: Synchronous Rectifier Control for High Efficiency Programmable Volt-Second Clamp Output Power Levels from 25W to 500W Low Current Start-Up (LT1952: 460µA; VIN On/Off = 14.25V/8.75V) (LT1952-1: 400µA; VIN On/Off = 7.75V/6.5V) True PWM Soft-Start Low Stress Short Circuit Protection Precision 107mV Current Limit Threshold Adjustable Delay for Synchronous Timing Accurate Shutdown Threshold with Programmable Hysteresis Programmable Slope Compensation Programmable Leading Edge Blanking Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock up to 1.5 • fOSC Internal 1.23V Reference 2.5V External Reference Current Mode Control Small 16-Pin SSOP Package

37V/1.2A Step-Down Regulator in 3mm 3mm DFN Features: Wide Input Range: Operation from 3.6V to 37V Overvoltage Lockout Protects Circuit Through 55V Transients Low Minimum On-Time: Converts 16VIN to 3.3VOUT at 2MHz 1.2A Output Current Adjustable Frequency: 300kHz to 2.5MHz Constant Switching Frequency at Light Loads Tracking and Soft-Start Precision UVLO Short-Circuit Robust IQ in Shutdown <1μA Internally Compensated 10-Lead 3mm × 3mm DFN Package

12 Channel Multicell Battery Monitor with Daisy Chain Interface, Generation 1 Features: Qualified for Automotive Applications Measures Up to 12 Li-Ion Cells in Series (60V Max) Stackable Architecture Enables >1000V Systems 0.25% Maximum Total Measurement Error 13ms to Measure All Cells in a System Cell Balancing: On-Chip Passive Cell Balancing Switches Provision for Off-Chip Passive Balancing Two Thermistor Inputs Plus On-Board Temperature Sensor 1MHz Daisy-Chainable Serial Interface High EMI Immunity Delta Sigma Converter with Built-In Noise Filter Open Wire Connection Fault Detection Low Power Modes 44-Lead SSOP Package

Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference 2.5V Full-Scale 10ppm/°C (LTC2631-L) 4.096V Full-Scale 10ppm/°C (LTC2631-H) Maximum INL Error: 1LSB (LTC2631A-12) Bidirectional Reference: Input or 10ppm/°C Output 400kHz I2C Interface Nine Selectable Addresses (LTC2631-Z) Low Noise (0.7mVP-P , 0.1Hz to 200kHz) Guaranteed Monotonic Over Temperature 2.7V to 5.5V Supply Range (LTC2631-L) Low Power Operation: 180μA at 3V Power Down to 1.8μA Maximum (C and I Grades) Power-On Reset to Zero or Mid-Scale Options Double-Buffered Data Latches Guaranteed Operation From –40°C to 125°C (H-Grade) 8-Lead TSOT-23 (ThinSOT™) Package