DSP, 2MB, 1GHZ, BGA-ED-400;

ADSP-BF535 - BLACKFIN Embedded Processor

Mixed Signal DSP Controller Data Sheet  

High Performance Fourth Generation DSP Features: 266 MHz core clock speed 3 Mbits of on-chip RAM FIR, IIR, and FFT accelerators 16-bit wide SDR SDRAM external memory interface Digital Applications Interface (DAI) enabling user-definable access to peripherals including an S/P DIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, and TDM modes Real-Time Clock (RTC) Watch Dog Timer Shift Registers 2 SPI-compatible ports supporting master and slave modes UART and Two-Wire Interface 16 Pulse Width Modulation (PWM) channels 3 full-featured timers 196 ball CSP_BGA and 100 ld LQFP EPAD packages Commercial, Industrial, and automotive temperature ranges

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 120-lead LQFP_EP Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Advanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 24 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 4x I2C, 2x UARTs 6x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 2-ch 12bit Housekeeping ADCs 22 GPIO pins, 24 DAI pins Thermal SensorPackage 14mm x 14mm 120-lead LQFP_EAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

400MHz SHARC+ DSP with 640KB L1, 256KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 400MHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 256KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Dual-core SHARC+ DSP (w/768KB L1), 1MB Shared L2, DDR, 400-cspBGA Features: Dual-enhanced SHARC+ high performance floating-point cores Up to 500 MHz per SHARC+ core Up to 3 Mb (384 kB) L1 SRAM memory per core with parity (optional ability to configure as cache) 32-bit, 40-bit, and 64-bit floating-point support 32-bit fixed point Byte, short word, word, long word addressed Powerful DMA system On-chip memory protection Integrated safety features 17 mm × 17 mm 400-ball CSP_BGA and 176-lead LQFP_EP, RoHS compliant Low system power across automotive temperature rangeMemory Large on-chip L2 SRAM with ECC protection, up to 1 MB One L3 interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.5 V capable DDR3L devices), DDR2, or LPDDR1 SDRAM devicesAdditional Features Security and Protection Cryptographic hardware accelerators Fast secure boot with IP protection Support for arm® TrustZone Accelerators FIR, IIR offload engines Qualified for automotive applications

Up to 1GHz Dual-SHARC+ DSP with 2x 640KB L1, 2048KB Shared L2 SRAM, 400-Ball FCBGA Features:SHARC+ Core Infrastructure 800 MHz (max) or 1 GHz (max) Core clock frequency 2x 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 2048 KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices)16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 8x Precision Clock Generators 2x 4-channel PDM Mic Inputs 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 16x General Purpose Timer, 1x General Purpose Counter 3x Watchdog Timers 4-ch 12bit Housekeeping ADC 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball FCBGA Fully pin-compatible with ADSP-21569, ADSP-21567, and ADSP-21566 processorsAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Up to 1GHz Dual-SHARC+ DSP with 2x 640KB L1, 2048KB Shared L2 SRAM, 400-Ball FCBGA Features:SHARC+ Core Infrastructure 800 MHz (max) or 1 GHz (max) Core clock frequency 2x 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 2048 KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices)16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 8x Precision Clock Generators 2x 4-channel PDM Mic Inputs 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 16x General Purpose Timer, 1x General Purpose Counter 3x Watchdog Timers 4-ch 12bit Housekeeping ADC 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball FCBGA Fully pin-compatible with ADSP-21569, ADSP-21567, and ADSP-21566 processorsAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Single-core SHARC+ (w/384KB L1), arm Cortex-A5, 1MB Shared L2, 10/100 Ethernet, 176-LQFP Features: Dual-enhanced SHARC+ high performance floating-point cores Up to 500 MHz per SHARC+ core Up to 3 Mb (384 kB) L1 SRAM memory per core with parity (optional ability to configure as cache) 32-bit, 40-bit, and 64-bit floating-point support 32-bit fixed point Byte, short word, word, long word addressed arm® Cortex-A5 core 500 MHz/800 DMIPS with NEON/VFPv4-D16/Jazelle 32 kB L1 instruction cache with parity/32 kB L1 data cache with parity 256 kB L2 cache with parity Powerful DMA system On-chip memory protection Integrated safety features 17 mm × 17 mm 400-ball CSP_BGA and 176-lead LQFP_EP, RoHS compliant Low system power across automotive temperature rangeMemory Large on-chip L2 SRAM with ECC protection, up to 1 MB One L3 interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.5 V capable DDR3L devices), DDR2, or LPDDR1 SDRAM devicesAdditional Features Security and Protection Cryptographic hardware accelerators Fast secure boot with IP protection Support for arm® TrustZone Accelerators FIR, IIR offload engines Qualified for automotive applications