BATTERY CHARGERS;

Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-MSOP

ADC 10BIT 100KSPS MSOP-8; Resolution (Bits):10bit; Sampling Rate:100kSPS; Supply Voltage Type:Single; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; ADC / DAC Case Style:MSOP; No. of Pins:8Pins; Input Channel Type:Single Ended; Data Interface:SPI; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:Single 10-Bit SAR ADCs; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Supply Current:2mA

COMPARATOR DUAL MSOP-10; Comparator Type:General Purpose; No. of Comparators:2; Response Time:-; Supply Voltage Range:2.3V to 5.5V; Comparator Case Style:MSOP; No. of Pins:10Pins; IC Output Type:Open Drain; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Cut Tape; Product Range:-; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (20-Jun-2016)

2.5 V to 5.5 V, 500 A, Quad Voltage Output 10-Bit DAC in 10-Lead Packages Features: 4 buffered 10-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±4 LSB INL, B Version: ±2.5 LSB INL Low power operation: 500 µA @ 3 V, 600 µA @ 5 V 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 80 nA @ 3 V, 200 nA @ 5 V Double-buffered input logic Output range: 0 V to VREF Power-on reset to 0 V Simultaneous update of outputs (LDAC function) Low power-, SPI®-, QSPI™-, MICROWIRE™-, and DSP-compatible 3-wire serial interface On-chip, rail-to-rail output buffer amplifiers Temperature range –40°C to +105°C Qualified for automotive applications

Micropower, Precision, Auto Qualified 4.096V Voltage Reference Features: Max temperature coefficient (TC) of 5ppm/ºC (B grade) Max temperature coefficient (TC) of 8 ppm/°C (A grade) Initial output voltage error: ±0.1% (maximum) Operating temperature range: −40°C to +125°C Output current: +10 mA source/−3 mA sink Low quiescent current: 100 μA (maximum) Long term drift: 30 ppm (initial 1 khr typical) Low dropout voltage: 250 mV at 2 mA Output noise (0.1 Hz to 10 Hz): 29μVp-p at 4.096V (typical) Qualified for automotive applications

Wide Band Medium Power Amplifier, 1000MHz Max

Low Power, Unity Gain Fully Differential Amplifier & ADC Driver Features: Very low power - 330 μA supply current Fully differential or single-ended inputs/outputs Differential output designed to drive precision ADCs - Drives switched capacitor and Σ-Δ ADCs - Rail-to-rail output VOCM pin adjusts output common mode Robust overvoltage up to 18 V beyond supplies High performance - Suitable for driving 16-bit converter up to 250 kSPS - 39 nV/√Hz output noise - 1 ppm/°C gain drift - 200 μV maximum output offset - 10 V/μs slew rate - 5 MHz bandwidth Single supply: 3 V to 18 V Dual supplies: ±1.5 V to ±9 V

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Rail-to-Rail Output, Precision Dual JFET Op Amp Features: Low Supply Current: 250 µA max Very Low Input Bias Current: 1 pA max Low Offset Voltage: 750 µV max Single-supply Operation: 5 V to 26 V Dual-supply Operation: ±2.5 V to ±13 V Rail-to-rail Output Unity Gain Stable No Phase Reversal