Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp Features: True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 36 V Dual-supply capability from ±2.5 V to ±18 V  Excellent load drive Capacitive load drive up to 350 pF Minimum output current of 15 mA  Excellent ac performance for low power 800 μA maximum quiescent current Unity-gain bandwidth: 1.8 MHz Slew rate of 3 V/μs  Excellent dc performance 800 μV maximum input offset voltage 2 μV/°C typical offset voltage drift 25 pA maximum input bias current  Low noise: 13 nV/√Hz @ 10 kHz 

Hot Swap Controller and I2C Power Monitor Features: Allows safe board insertion and removal from a live backplane  Controls supply voltages from 3.15 V to 16.5 V  Precision current sense amplifier  Precision voltage input  12-bit ADC for current and voltage readback  Charge pumped gate drive for external N-channel FET  I2C fast mode-compliant interface (400 kHz maximum) Adjustable analog current limit with circuit breaker  ±3% accurate hot swap current limit level  Fast response limits peak fault current  Automatic retry or latch-off on current fault  Programmable hot swap timing via TIMER pin  Active-high ON pin  2 address pins allow 16 devices on the same bus 10-lead MSOP

IC VOLT REGULATOR FIXED +2.5V BIPOLAR TSSOP 8PIN PLASTIC

10-Bit, 1 MSPS, Low-Power A/D Converter in SC70 and MSOP Packages Features: Fast throughput rate: 1 MSPS Specified for VDD of 2.35 V to 5.25 V Low power 3.6 mW at 1 MSPS with 3 V supplies 12.5 mW at 1 MSPS with 5 V supplies Wide input bandwidth 71 dB SNR at 100 kHz input frequency No pipeline delays Flexible power/serial clock speed management High speed serial interface SPI/QSPI™/MICROWIRE/DSP compatible Standby mode: 1 µA maximum 6-lead SC70 package 8-lead MSOP Qualified for automotive applications

Analog to Digital Converters - ADC 16-BIT 100ksps I.C.

16BIT DAC NANO DUAL SMD MSOP10; Resolution (Bits):16bit; Sampling Rate:200kSPS; Input Channel Type:Serial; Supply Voltage Range:2.7V to 5.5V; ADC / DAC Case Style:SOP; No. of Pins:10Pins; Data Interface:3 Wire Serial; Operating Temperature Min:-40°C; Operating Temperature Max:105°C; Packaging:Each; Product Range:AD5663 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Base Number:5663; IC Case Style:SOP; Linearity Error:1.5%; Linearity Error ADC / DAC +:16LSB; Linearity Error ADC / DAC -:16LSB; No. of Bits:16bit; No. of Channels:2Channels; Operating Temperature Range:-40°C to +105°C; Output Type:Rail-to-Rail; Sample Rate:200kSPS; Settling Time:4µs; Supply Current:250µA; Supply Voltage Max:5.5V; Supply Voltage Min:2.7V; Termination Type:Surface Mount Device

Operational Amplifiers - Op Amps High Spd CMOS RR Video Amp

Hot Swap Voltage Controllers ON Pin + Latched Off I.C.

IC Instrumentation Amplifier SINGLE SSOP 8PIN PLASTIC

The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. For lower offset voltage, choose the AD8661/AD8662/AD8664 family.The combination of low offsets, very low input bias currents, and wide supply range make these amplifiers useful in a wide variety of cost sensitive applications normally associated with much higher priced JFET amplifiers. Systems using high impedance sensors, such as photo diodes, benefit from the combination of low input bias current, low noise, and low offset and bandwidth. The wide operating voltage range matches high performance ADCs and DACs. Audio applications and medical monitoring equipment can take advantage of the high input impedance, low voltage and current noise, wide bandwidth, and the lack of popcorn noise found in many other low input bias current amplifiers.The AD866x family is specified over the extended industrial temperature range (−40° to +125°C). See the Ordering Guide for automotive models.Applications Sensor amplificationReference buffersMedical equipmentPhysiological measurementsSignal filters and conditioningConsumer audioPhotodiode amplificationADC driverLevel shifting circuits