Bidirectional, Zero Drift, Current Sense Amplifier Features: Typical 0.1 µV/°C offset drift Maximum ±400 µV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V continuous −3 V to +80 V survival Initial gain = 60 V/V Wide operating temperature range AD8417WB: −40°C to +125°C AD8417WH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC and 8-lead MSOP Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz Qualified for automotive applications

Bidirectional, Zero-Drift, Current Sense Amplifier Features: Typical 0.1 μV/°C offset drift Maximum ±200 μV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V, continuous operation −3 V to +80 V, continuous survival Minimum DC common-mode rejection ratio (CMRR): 90 dB Initial gain = 20 V/V Wide operating temperature range AD8418AWB and AD8418AB: −40°C to +125°C AD8418AWH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC_N, 8-lead MSOP, and FMEA tolerant 10-lead MSOP pinout AEC-Q100 qualified for automotive applications

IC Operational Amplifier DUAL CMOS TSSOP 8PIN PLASTIC

2, 31.76 W, Digital Input, Filterless Stereo Class D Audio Amplifier Features: Digital input stereo, high efficiency Class-D amplifier Operates from a single 4.5 V to 16.5 V supply State-of-the-art, proprietary, filterless - modulation 106.5 dB SNR at PO = 8.1 W, RL = 8 , AV = 19 dB, PVDD = 12 V, A weighted 0.004% THD + N at 5 W into 8 38.5 V rms output voltage noise, f = 20 Hz to 20 kHz, A weighted, PVDD = 16 V, 8 Pop and clickless on and off sequence 2 14.67 W output at 12 V supply to 4 loads at <1% THD + N 2 14.4 W output at 16 V supply to 8 loads at <1% THD + N Mono mode for increased maximum output power 1 49.69 W output at 16 V supply to 2 loads at <1% THD + N Support for low impedance loads As low as 3 Ω/5 μH in stereo mode As low as 2 Ω/5 μH in mono mode High power efficiency 93.8% efficiency into an 8 Ω load 90.6% efficiency into a 4 Ω load 12.34 mA quiescent current with single 12 V PVDD supply Single-supply operation with internal LDOs or option to use an external 5 V and 1.8 V supply for lowest power consumption I2C control and hardware modes with up to 16 pin-selectable slots/addresses Supported sample rates from 8 kHz to 192 kHz with 24-bit resolution Multiple PCM audio serial data formats TDM slave with support for up to 16 devices on a single bus I2S or left justified slave Adjustable full-scale output tailored for many PVDD sources 2- and 3-cell Li-Ion batteries Digital volume control with selectable smooth ramp Automatic power-down function Supply monitoring automatic gain control (AGC) function reduces system brownout Standalone operational mode without I2C Temperature sensor with 1°C step readout via I2C Short-circuit, undervoltage, and thermal protection Thermal early warning Power-on reset PVDD sensing ADC 40-lead, 6 mm × 6 mm LFCSP with thermal pad

IC VARIABLE GAIN AMP DIP16 600; No. of Channels:1Channels; No. of Amplifiers:1 Amplifier; Bandwidth:35MHz; Operating Temperature Min:0°C; Operating Temperature Max:70°C; Supply Voltage Range:± 4.75V to ± 5.25V; Amplifier Case Style:DIP; No. of Pins:16Pins; Packaging:Each; Product Range:AD600 Series; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:± 4.75V to ± 5.25V; Base Number:600; Gain Accuracy:1dB; Gain Bandwidth:35MHz; Gain dB Max:40dB; IC Generic Number:600; IC Temperature Range:Commercial; Logic Function Number:600; No. of Amplifiers:1Amplifiers; Operating Temperature Range:0°C to +70°C; Supply Voltage Max:5.25V; Supply Voltage Min:4.75V; Termination Type:Through Hole

Precision, Selectable Gain, Fully Differential Funnel Amplifier Features: Precision attenuation: G = 0.4, G = 0.8 Fully differential or single-ended input/output Differential output designed to drive precision ADCs Drives switched capacitor and Σ-Δ ADCs Rail-to-rail output VOCM pin adjusts output common-mode voltage Robust overvoltage protection up to ±15 V (VS = +5 V) Single supply: 3 V to 10 V Dual supplies: ±1.5 V to ±5 V High performance Suited for driving 18-bit converters up to 4 MSPS 10 nV/√Hz output noise 3 ppm/°C gain drift 500 μV maximum output offset 50 V/μs slew rate Low power: 3.2 mA supply current

OP AMP 1MHZ 3V/uS TO-99-8; No. of Amplifiers:1 Amplifier; Bandwidth:1MHz; Slew Rate:3V/ s; Supply Voltage Range: 5V to 18V; Amplifier Case Style:TO-99; No. of Pins:8Pins; Operating Temperature Min:0 C; Packaging:Each; MSL:- ;RoHS Compliant: No

50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages