50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

36 V, Low Noise, Zero Drift Op Amp Features: Supply voltage range: 4.5 V to 36 V Offset voltage: ±4 µV maximum at 5 V Offset voltage drift: 0.01 µV/°C maximum at 5 V Input noise Voltage: 88 nV p-p from 0.1 Hz to 10 Hz typical Spectral density voltage: 4.2 nV/√Hz typical at 1 kHz Rail-to-rail output Unity-gain stable GBP: 5 MHz typical Slew rate: 1.8 V/µs typical falling PSRR: 168 dB typical at VS = 4.5 V to 36 V Open-loop voltage gain: 160 dB typical at VOUT = −14.75 V to +14.75 V, RL = 10 k, VS = 30 V CMRR: 160 dB typical at VCM = −15.1 V to +13.5 V,VS= 30V Integrated EMI filters Shutdown mode Ground sense Available in 8-lead SOIC, 8-lead MSOP, and 8-lead LFCSP

Low Noise, Precision, Rail-to-Rail Output, JFET Single Op Amp Features: Low offset voltage B grade: 0.4 mV maximum A grade: 1 mV maximum Low offset voltage drift B grade: 2 µV/°C maximum A grade: 8 µV/°C maximum (SOIC, MSOP, LFCSP packages) Low input bias current: 5 pA typical Dual-supply operation: ±5 V to ±15 V Low voltage noise: 0.45 µV p-p at 0.1 Hz to 10 Hz Voltage noise density: 7.30 nV/√Hz at f = 1 kHz Low THD + N: 0.00025% No phase reversal Rail-to-rail output Unity-gain stable Long-term offset voltage drift (10,000 hours): 5 µV typical Temperature hysteresis: 8 µV typical

Low Noise, Precision CMOS Amplifier Features: Low Noise: 2.7 nV/√rHz @ f = 10 kHz Low offset voltage: 250 μV max over Vcm Low Distortion: 0.0008% Offset voltage drift: 0.4 μV/°C typ and 2.3 μV/°C max Bandwidth: 28 MHz Rail-to-rail Input/Output Unity Gain Stable 2.7 V to 5.5 V Operation −40°C to +125°C Operation Qualified for automotive applications

Bidirectional, Zero-Drift, Current Sense Amplifier Features: Typical 0.1 μV/°C offset drift Maximum ±200 μV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V, continuous operation −3 V to +80 V, continuous survival Minimum DC common-mode rejection ratio (CMRR): 90 dB Initial gain = 20 V/V Wide operating temperature range AD8418AWB and AD8418AB: −40°C to +125°C AD8418AWH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC_N, 8-lead MSOP, and FMEA tolerant 10-lead MSOP pinout AEC-Q100 qualified for automotive applications

2, 31.76 W, Digital Input, Filterless Stereo Class D Audio Amplifier Features: Digital input stereo, high efficiency Class-D amplifier Operates from a single 4.5 V to 16.5 V supply State-of-the-art, proprietary, filterless - modulation 106.5 dB SNR at PO = 8.1 W, RL = 8 , AV = 19 dB, PVDD = 12 V, A weighted 0.004% THD + N at 5 W into 8 38.5 V rms output voltage noise, f = 20 Hz to 20 kHz, A weighted, PVDD = 16 V, 8 Pop and clickless on and off sequence 2 14.67 W output at 12 V supply to 4 loads at <1% THD + N 2 14.4 W output at 16 V supply to 8 loads at <1% THD + N Mono mode for increased maximum output power 1 49.69 W output at 16 V supply to 2 loads at <1% THD + N Support for low impedance loads As low as 3 Ω/5 μH in stereo mode As low as 2 Ω/5 μH in mono mode High power efficiency 93.8% efficiency into an 8 Ω load 90.6% efficiency into a 4 Ω load 12.34 mA quiescent current with single 12 V PVDD supply Single-supply operation with internal LDOs or option to use an external 5 V and 1.8 V supply for lowest power consumption I2C control and hardware modes with up to 16 pin-selectable slots/addresses Supported sample rates from 8 kHz to 192 kHz with 24-bit resolution Multiple PCM audio serial data formats TDM slave with support for up to 16 devices on a single bus I2S or left justified slave Adjustable full-scale output tailored for many PVDD sources 2- and 3-cell Li-Ion batteries Digital volume control with selectable smooth ramp Automatic power-down function Supply monitoring automatic gain control (AGC) function reduces system brownout Standalone operational mode without I2C Temperature sensor with 1°C step readout via I2C Short-circuit, undervoltage, and thermal protection Thermal early warning Power-on reset PVDD sensing ADC 40-lead, 6 mm × 6 mm LFCSP with thermal pad

OP-AMP, 10.4MHZ, 6 TO 40V, MSOP-8;

Op-Amp, 10Mhz, -40 To 125Deg C, Msop-8 |Analog Devices MAX74821ARMZ-R7

Zero-Drift, Single-Supply, RRIO Single Op Amp Features: Low offset voltage: 1 μV Input offset drift: 0.005 μV/°C Rail-to-rail input and output swing 5 V/2.7 V single-supply operation High gain: 145 dB typical CMRR: 140 dB typical PSRR: 130 dB typical See data sheet for additional information

Rugged, Military Temperature Range, 1 0 kHz Bandwidth Isolation Amplifier Features: Rugged Design:  characterized to MIL-STD-883C Environmental Test Methods 1004 (Moisture Resistance) 1010 Condition B (Temperature Cycling, -55°C to +125°C) 2002 Condition B (Mechanical Shock@ 1,500 g for 0.5 ms) 2004 (Lead Integrity) 2007 Condition A (Variable Frequency Vibration @20g) 2015 (Resistance to Solvents) Reliable Design: Conforms to Stringent Quality and Reliability Standards Characterized to the Full Military Temperature Range -55°C to +125°C Rated Performance 10 kHz Full Power Bandwidth Low Nonlinearity: ±0.025% max Wide Output Range: ±10 V min (Into a 2.5 kΩ Load) High CMV Isolation: 1500 V RMS Continuous Isolated Power: ±15 V DC@ ±5 mA Small Size: 2.23'x0.83'x0.65' 56.6 mmx21.1 mmx16.5 mm Uncommitted Input Amplifier Two-Port Isolation Through Transformer Coupling