Programmable Transimpedance, Current to Bits Receiver Module Features: High performance, current input, data acquisition μModule that includes a TIA, analog filter, ADC driver, and ADC 3 selectable TZ settings: 2 k, 20 k, and 200 k Internal 1.8 V LDO for the ADC All passive components including supply decoupling Small form factor: 12.00 mm × 6.00 mm CSP_BGA Operation from a single 3.3 V supply Full-scale input current to 800 μA (TZ = 2 k) Fast input overload recovery High analog input current to 40 mAAnalog filter for noise reduction and antialias filtering Selectable 1.0 MHz and 100 MHz LPF bandwidth Low input referred current noise: 16 pA rms TZ = 200 k, 65,536 averages, 1 MHz analog filter Supports input pulse widths down to 10 ns 14-bit ADC with sample rate up to 125 MSPS Serial LVDS data output SPI control interface Quiescent power: 546 mW, LDO enabled Temperature range: 40C to +85C

Ultrafast 3.3 V Single-Supply Comparator w/CML Output Drivers Features: 3.3 V/5.2 V single-supply operation 150 ps propagation delay 15 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 80 ps minimum pulse width 35 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) On-chip terminations at both input pins Robust inputs with no output phase reversal Resistor-programmable hysteresis Differential latch control Extended industrial −40°C to +125°C temperature range

Dual High Voltage, High Side Current Sense Amplifier Features: Two Independent Current Sense Amplifiers Wide Supply Range: 4V to 60V, 70V Absolute Maximum Low Offset Voltage: 450µV Maximum Fast Response: 1µs Response Time Gain Configurable with External Resistors Low Input Bias Current: 170nA Maximum PSRR: 110dB Minimum (6V to 60V) Output Current: 1mA Maximum Low Supply Current: 275µA per Amplifier, VS = 12V Specified for –40°C to 125°C Temperature Range Available in an 8-lead MSOP Package

Precision Zero Drift Current Sense Amplifier Features: Supply Range: 4V to 60V, 70V Maximum (LTC6102) 5V to 100V, 105V Maximum (LTC6102HV) ±10μV Input Offset Maximum ±50nV/°C Input Offset Drift Maximum Fast Response: 1μs Step Response Gain Configurable with Two Resistors Low Input Bias Current: 3nA Maximum PSRR 130dB Minimum Output Currents up to 1mA Operating Temperature Range: –40°C to 125°C Disable Mode (LTC6102-1 Only): 1μA Maximum Available in 8-Lead MSOP and 3mm × 3mm DFN Packages

Low Noise Quad Op Amp Features: Very Low-Noise, 5 nV/√Hz @ 1 kHz Max  Excellent Input Offset Voltage, 0.4 mV Max  Low Offset Voltage Drift, 2 µV/°C Max  Very High Gain, 1000 V/mV Min  Outstanding CMR, 110 dB Min  Slew Rate, 2 V/µs Typ  Gain-Bandwidth Product, 6 MHz Typ  Industry Standard Quad Pinouts  Available in Die Form 

Low Cost, High Speed, Rail-to-Rail Amplifier Features: High speed and fast settling on 5 V 110 MHz, −3 dB bandwidth (G = +1) (AD8051/AD8052) 150 MHz, −3 dB bandwidth (G = +1) (AD8054) 145 V/μs slew rate 50 ns settling time to 0.1% Single-supply operation Output swings to within 25 mV of either rail Input voltage range: −0.2 V to +4 V; VS = 5 V Video specifications (G = +2) 0.1 dB gain flatness: 20 MHz; RL = 150 Ω Differential gain/phase: 0.03%/0.03° Low distortion −80 dBc total harmonic @ 1 MHz, RL = 100 Ω Outstanding load drive capability Drives 45 mA, 0.5 V from supply rails (AD8051/AD8052) Drives 50 pF capacitive load (G = +1) (AD8051/AD8052) Low power: 2.75 mA/amplifier (AD8054) Low power: 4.4 mA/amplifier (AD8051/AD8052)

Low Cost 270 MHz Differential Receiver Amplifier Features: High Speed AD8130: 270 MHz, 1090 V/µs @ G = +1 AD8129: 200 MHz, 1060 V/µs @ G = +10 High CMRR 94 dB min, dc to 100 kHz 80 dB min @ 2 MHz 70 dB @ 10 MHz Low noise AD8130: 12.5 nV/√Hz AD8129: 4.5 nV/√Hz High input impedance: 1 MΩ differential Input common-mode range ±10.5 V Low distortion, 1 V p-p @ 5 MHz: AD8130, -79 dBc worst harmonic @ 5 MHz AD8129, -74 dBc worst harmonic @ 5 MHz User-adjustable gain No external components for G = +1 Power supply range +4.5 V to ±12.6 V Power-down

Low Cost, General-Purpose High Speed JFET Amplifier Features: High Speed 41 MHz, -3 dB bandwidth 125 V/µs slew rate 80 ns settling time Input bias current of 20 pA and noise current of 10 fA/√Hz Fully specified power supplies: ±5 V to ±15V Input voltage noise of 12 nV/√Hz Low distortion: -76 dB at 1 MHz High output drive capability Drives unlimited capacitance load 50 mA min output current No phase reversal when input is at rail Available in 8-lead SOIC

Programmable Transimpedance, Current to Bits Receiver Module Features: High performance, current input, data acquisition μModule that includes a TIA, analog filter, ADC driver, and ADC 3 selectable TZ settings: 2 k, 20 k, and 200 k Internal 1.8 V LDO for the ADC All passive components including supply decoupling Small form factor: 12.00 mm × 6.00 mm CSP_BGA Operation from a single 3.3 V supply Full-scale input current to 800 μA (TZ = 2 k) Fast input overload recovery High analog input current to 40 mAAnalog filter for noise reduction and antialias filtering Selectable 1.0 MHz and 100 MHz LPF bandwidth Low input referred current noise: 16 pA rms TZ = 200 k, 65,536 averages, 1 MHz analog filter Supports input pulse widths down to 10 ns 14-bit ADC with sample rate up to 125 MSPS Serial LVDS data output SPI control interface Quiescent power: 546 mW, LDO enabled Temperature range: 40C to +85C

10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum