Ultrafast 3.3 V Single-Supply Comparator w/CML Output Drivers Features: 3.3 V/5.2 V single-supply operation 150 ps propagation delay 15 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 80 ps minimum pulse width 35 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) On-chip terminations at both input pins Robust inputs with no output phase reversal Resistor-programmable hysteresis Differential latch control Extended industrial −40°C to +125°C temperature range

Low Noise Quad Op Amp Features: Very Low-Noise, 5 nV/√Hz @ 1 kHz Max  Excellent Input Offset Voltage, 0.4 mV Max  Low Offset Voltage Drift, 2 µV/°C Max  Very High Gain, 1000 V/mV Min  Outstanding CMR, 110 dB Min  Slew Rate, 2 V/µs Typ  Gain-Bandwidth Product, 6 MHz Typ  Industry Standard Quad Pinouts  Available in Die Form 

700 MHz to 4200 MHz Tx DGA Features: Differential input to single-ended output conversion Broad input frequency range: 700 MHz to 4200 MHz Maximum gain: 12.0 dB typical Gain range of 20 dB typical Gain step size: 0.5 dB typical Glitch free, thermometer-based digital step attenuator Fast attack, gain switching with programmable gain step Matched 50 Ω inputs and output

Programmable Transimpedance, Current to Bits Receiver Module Features: High performance, current input, data acquisition μModule that includes a TIA, analog filter, ADC driver, and ADC 3 selectable TZ settings: 2 k, 20 k, and 200 k Internal 1.8 V LDO for the ADC All passive components including supply decoupling Small form factor: 12.00 mm × 6.00 mm CSP_BGA Operation from a single 3.3 V supply Full-scale input current to 800 μA (TZ = 2 k) Fast input overload recovery High analog input current to 40 mAAnalog filter for noise reduction and antialias filtering Selectable 1.0 MHz and 100 MHz LPF bandwidth Low input referred current noise: 16 pA rms TZ = 200 k, 65,536 averages, 1 MHz analog filter Supports input pulse widths down to 10 ns 14-bit ADC with sample rate up to 125 MSPS Serial LVDS data output SPI control interface Quiescent power: 546 mW, LDO enabled Temperature range: 40C to +85C

10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum

18 V, 725 A, 4 MHz CMOS RRIO Operational Amplifier Features: Low power at high voltage (18 V): 725 μA maximum Low offset voltage: 2.2 mV maximum over entire common-mode range Low input bias current: 15 pA maximum Gain bandwidth product: 4 MHz typical at Av = 100 Unity-gain crossover: 4 MHz typical −3 dB closed-loop bandwidth: 2.1 MHz typical Single-supply operation: 3 V to 18 V Dual-supply operation: ±1.5 V to ±9 V Unity-gain stable

100 V, Precision Operational Amplifier Features: Low input offset voltage: ≤0.2 mV typical  High output current drive: 30 mA  Wide range of operating voltage: ±5 V to ±50 V  High slew rate: 20 V/μs typical  High gain bandwidth product: 3.5 MHz typical  Thermal regulation at junction temperature >145°C  Ambient temperature range of -40° C to +85° C  Low input bias current ≤ 15 nA typical 

3.1 nV/Hz, 1 mA, 180 MHz, Rail-to-Rail Input/Output Amplifier Features: Low Noise 3.1 nV/√Hz at 100 kHz 0.7 pA/√Hz at 100 kHz Low Distortion (HD2/HD3) -141/-144 dBc at 1 kHz -112/-115 dBc at 100 kHz -95/-79 dBc at 1 MHz High speed performance -3dB bandwidth: 200 MHz Slew Rate: 225 V/µs 0.1% Settling Time: 47 ns Low input offset voltage and drift ±20 / ±125 µV (typical / max) 0.7 /3.7 µV/°C (typical) Low input offset current and drift 8 / 100 nA (typical / max) 30 / 250 pA/°C (typical / max) Rail-to-Rail Input and Output Low quiescent current: Enabled: 1 mA at ±5V Disabled: 2.4 µA at ±5V Wide supply range: 2.7 V to 11 V Small Packaging: 6-lead SC70, 6-lead SOT-23

Low Cost, High Speed, Rail-to-Rail Amplifier Features: High speed and fast settling on 5 V 110 MHz, −3 dB bandwidth (G = +1) (AD8051/AD8052) 150 MHz, −3 dB bandwidth (G = +1) (AD8054) 145 V/μs slew rate 50 ns settling time to 0.1% Single-supply operation Output swings to within 25 mV of either rail Input voltage range: −0.2 V to +4 V; VS = 5 V Video specifications (G = +2) 0.1 dB gain flatness: 20 MHz; RL = 150 Ω Differential gain/phase: 0.03%/0.03° Low distortion −80 dBc total harmonic @ 1 MHz, RL = 100 Ω Outstanding load drive capability Drives 45 mA, 0.5 V from supply rails (AD8051/AD8052) Drives 50 pF capacitive load (G = +1) (AD8051/AD8052) Low power: 2.75 mA/amplifier (AD8054) Low power: 4.4 mA/amplifier (AD8051/AD8052)

Low Cost 270 MHz Differential Receiver Amplifier Features: High Speed AD8130: 270 MHz, 1090 V/µs @ G = +1 AD8129: 200 MHz, 1060 V/µs @ G = +10 High CMRR 94 dB min, dc to 100 kHz 80 dB min @ 2 MHz 70 dB @ 10 MHz Low noise AD8130: 12.5 nV/√Hz AD8129: 4.5 nV/√Hz High input impedance: 1 MΩ differential Input common-mode range ±10.5 V Low distortion, 1 V p-p @ 5 MHz: AD8130, -79 dBc worst harmonic @ 5 MHz AD8129, -74 dBc worst harmonic @ 5 MHz User-adjustable gain No external components for G = +1 Power supply range +4.5 V to ±12.6 V Power-down