Precision Zero Drift Current Sense Amplifier Features: Supply Range: 4V to 60V, 70V Maximum (LTC6102) 5V to 100V, 105V Maximum (LTC6102HV) ±10μV Input Offset Maximum ±50nV/°C Input Offset Drift Maximum Fast Response: 1μs Step Response Gain Configurable with Two Resistors Low Input Bias Current: 3nA Maximum PSRR 130dB Minimum Output Currents up to 1mA Operating Temperature Range: –40°C to 125°C Disable Mode (LTC6102-1 Only): 1μA Maximum Available in 8-Lead MSOP and 3mm × 3mm DFN Packages

Dual High Voltage, High Side Current Sense Amplifier Features: Two Independent Current Sense Amplifiers Wide Supply Range: 4V to 60V, 70V Absolute Maximum Low Offset Voltage: 450µV Maximum Fast Response: 1µs Response Time Gain Configurable with External Resistors Low Input Bias Current: 170nA Maximum PSRR: 110dB Minimum (6V to 60V) Output Current: 1mA Maximum Low Supply Current: 275µA per Amplifier, VS = 12V Specified for –40°C to 125°C Temperature Range Available in an 8-lead MSOP Package

Programmable Transimpedance, Current to Bits Receiver Module Features: High performance, current input, data acquisition μModule that includes a TIA, analog filter, ADC driver, and ADC 3 selectable TZ settings: 2 k, 20 k, and 200 k Internal 1.8 V LDO for the ADC All passive components including supply decoupling Small form factor: 12.00 mm × 6.00 mm CSP_BGA Operation from a single 3.3 V supply Full-scale input current to 800 μA (TZ = 2 k) Fast input overload recovery High analog input current to 40 mAAnalog filter for noise reduction and antialias filtering Selectable 1.0 MHz and 100 MHz LPF bandwidth Low input referred current noise: 16 pA rms TZ = 200 k, 65,536 averages, 1 MHz analog filter Supports input pulse widths down to 10 ns 14-bit ADC with sample rate up to 125 MSPS Serial LVDS data output SPI control interface Quiescent power: 546 mW, LDO enabled Temperature range: 40C to +85C

10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum

18 V, 725 A, 4 MHz CMOS RRIO Operational Amplifier Features: Low power at high voltage (18 V): 725 μA maximum Low offset voltage: 2.2 mV maximum over entire common-mode range Low input bias current: 15 pA maximum Gain bandwidth product: 4 MHz typical at Av = 100 Unity-gain crossover: 4 MHz typical −3 dB closed-loop bandwidth: 2.1 MHz typical Single-supply operation: 3 V to 18 V Dual-supply operation: ±1.5 V to ±9 V Unity-gain stable

100 V, Precision Operational Amplifier Features: Low input offset voltage: ≤0.2 mV typical  High output current drive: 30 mA  Wide range of operating voltage: ±5 V to ±50 V  High slew rate: 20 V/μs typical  High gain bandwidth product: 3.5 MHz typical  Thermal regulation at junction temperature >145°C  Ambient temperature range of -40° C to +85° C  Low input bias current ≤ 15 nA typical 

3.1 nV/Hz, 1 mA, 180 MHz, Rail-to-Rail Input/Output Amplifier Features: Low Noise 3.1 nV/√Hz at 100 kHz 0.7 pA/√Hz at 100 kHz Low Distortion (HD2/HD3) -141/-144 dBc at 1 kHz -112/-115 dBc at 100 kHz -95/-79 dBc at 1 MHz High speed performance -3dB bandwidth: 200 MHz Slew Rate: 225 V/µs 0.1% Settling Time: 47 ns Low input offset voltage and drift ±20 / ±125 µV (typical / max) 0.7 /3.7 µV/°C (typical) Low input offset current and drift 8 / 100 nA (typical / max) 30 / 250 pA/°C (typical / max) Rail-to-Rail Input and Output Low quiescent current: Enabled: 1 mA at ±5V Disabled: 2.4 µA at ±5V Wide supply range: 2.7 V to 11 V Small Packaging: 6-lead SC70, 6-lead SOT-23

The OP221 is a monolithic dual operational amplifier that can be used either in single or dual supply operation. The wide supply voltage range, wide input voltage range, and low supply current drain of the OP221 make it well-suited for operation from batteries or unregulated power supplies.The excellent specifications of the individual amplifiers combined with the tight matching and temperature tracking between channels provided high performance in instrumentation amplifier designs. The individual amplifiers feature extremely low input offset voltage, low offset voltage drift, low noise voltage, and low bias current. They are fully compensated and protected.Matching between channels is provided on all critical parameters including input offset voltage, tracking of offset voltage vs. temperature, non-inverting bias currents, and common-mode rejection.

The OP221 is a monolithic dual operational amplifier that can be used either in single or dual supply operation. The wide supply voltage range, wide input voltage range, and low supply current drain of the OP221 make it well-suited for operation from batteries or unregulated power supplies.The excellent specifications of the individual amplifiers combined with the tight matching and temperature tracking between channels provided high performance in instrumentation amplifier designs. The individual amplifiers feature extremely low input offset voltage, low offset voltage drift, low noise voltage, and low bias current. They are fully compensated and protected.Matching between channels is provided on all critical parameters including input offset voltage, tracking of offset voltage vs. temperature, non-inverting bias currents, and common-mode rejection.

The OP747 a precision quad rail-to-rail output single-supply amplifier featuring micropower operation and rail-to-rail output ranges. The OP777, OP727, and OP747 amplifiers provide improved performance over the industry standard OP07 with ±15 V supplies , and offer the further advantage of true single-supply operation down to 3 V, and smaller package options than any other high-voltage precision bipolar amplifier. Outputs are stable with capacitive loads of over 500 pF. Supply current is less than 300 μA per amplifier at 5 V. 500 Ω series resistors protect the inputs, allowing input signal levels several volts abovethe positive supply without phase reversal.Applications for these amplifiers include both line-powered and portable instrumentation, remote sensor signal conditioning, and precision filters.The OP777, OP727, and OP747 are specified over the extended industrial (–40°C to +85°C) temperature range. The OP777, single, is available in 8-lead MSOP and 8-lead SOIC packages. The OP747, quad, is available in 14-lead TSSOP and narrow 14-lead SO packages. Surface-mount devices in TSSOP and MSOP packages are available in tape and reel only.The OP727, dual, is available in 8-lead TSSOP and 8-lead SOIC packages. The OP727 8-lead SOIC pin configuration differs from the standard 8-lead operational amplifier pinout.