Diversity Receiver Chipset Features: Dual IF Inputs, 70 MHz–250 MHz Diversity or Two Independent IF Signals Separate Attenuation Paths Oversample RF Channels 20 MSPS on a Single Carrier 10 MSPS/Channel in Diversity Mode Total Signal Range 90+ dB 30 dB from Automatic Gain-Ranging (AGC) 60 dB from A/D Converter Range >100 dB After Processing Gain See datasheet for additional features

10-Bit, 1 MSPS, Low-Power A/D Converter in SC70 and MSOP Packages Features: Fast throughput rate: 1 MSPS Specified for VDD of 2.35 V to 5.25 V Low power 3.6 mW at 1 MSPS with 3 V supplies 12.5 mW at 1 MSPS with 5 V supplies Wide input bandwidth 71 dB SNR at 100 kHz input frequency No pipeline delays Flexible power/serial clock speed management High speed serial interface SPI/QSPI™/MICROWIRE/DSP compatible Standby mode: 1 µA maximum 6-lead SC70 package 8-lead MSOP Qualified for automotive applications

100 kSPS 16-BIT PulSAR A/D Converter in SOIC/QFN Features: 16-Bits Resolution with No Missing 16-Bit Codes Throughput: 100 kSPS INL: ±1 LSB Typ, ±3 LSB Max Power Dissipation: 4 mW @ 5V/100 kSPS 150 µW @ 2.7 V/10 kSPS Pseudo-Differential Analog Input Range: 0 V to VREF with VREF up to VDD No Pipeline Delay Single Supply Operation 2.7 V to 5.5 V See Data Sheet for Additional Information

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.

12-bit Digital-to-Analog Converters, with Zener Reference Features: Single Chip Construction Very High Speed Settling to 1/2 LSB AD565A: 250 ns max Full-Scale Switching Time: 30 ns Guaranteed for Operation with ±12 V (AD565A) Supplies Low Cost Linearity Guaranteed Over temperature 1/2 LSB max (K, T Grades) Monotonicity Guaranteed Over temperature Low Power = 225mW max Use with On-Board High Stability Reference

Tiny 16-Bit SPI nanoDAC+, with 2 (16-Bit) LSB INL and 2 ppm/C Reference Features: Ultrasmall package: 2 mm × 2 mm, 8-lead LFCSP High relative accuracy (INL): ±2 LSB maximum at 16 bits AD5683R/AD5682R/AD5681R Low drift, 2.5 V reference: 2 ppm/°C typical Selectable span output: 2.5 V or 5 V Total unadjusted error (TUE): 0.06% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.05% of FSR maximum Low glitch: 0.1 nV-sec High drive capability: 20 mA Low power: 1.2 mW at 3.3 V Independent logic supply: 1.62 V logic compatible Wide operating temperature range: −40°C to +105°C Robust 4 kV HBM ESD protection

Quad, 16-Bit nanoDAC+ with SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum @ 16 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 1.8 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

CMOS 12-Bit Buffered Multiplying DAC With Onboard Data Latches Features: 12-Bit Resolution Low Gain TC: 2ppm/°C typ Fast TTL Compatible Data Latches Small 20-Lead 0.3" DIP and 20-Terminal Surface Mount Packages Single +5 V to +15 V Supply Latch Free (Schottky Protection Diode not Required) Low Cost Ideal for Battery Operated Equipment

12 Channel, 8-Bit TrimDACs with Power Shutdown & Separate VREFL Input Features: Low Cost Replaces 12 Potentiometers Individually Programmable Outputs Power Shutdown < 55 µWatts Including IDD & IREF 3-Wire SPI Compatible Serial Input Midscale Preset, AD8802 Separate VREF Range Settling, AD8804 +3 to +5 Single Supply Operation

Complete 12-Bit, 10.0 MSPS Monolithic A/D Converter Features: Monolithic 12-Bit A/D Converter Product Family Family Members are: AD9221, AD9223, and AD9220 Flexible Sampling Rates: 1.5 MSPS, 3.0 MSPS, and 10 MSPS Low Power Dissipation: 59 mW, 100 mW, and 250 mW Single +5 V Supply Integral Nonlinearity Error: 0.5 LSB Differential Nonlinearity Error: 0.3 LSB 70 dB SNR and 86 dB SFDR Out-of-Range Indicator 28-SOIC and 28-SSOP