Dual 12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface Features: Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of full-scale range (FSR) maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface Low power: 3.3 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

Single-Channel, 16-Bit Current and Voltage Output DAC with Dynamic Power Control and HART Connectivity Features: 16-bit resolution and monotonicity DPC for thermal management Current/voltage output available on a single terminal Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA, 0 mA to 24 mA, ±20 mA, ±24 mA, −1 mA to +22 mA Voltage output ranges (with 20% overrange): 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V User-programmable offset and gain Advanced on-chip diagnostics, including a 12-bit ADC On-chip reference Robust architecture, including output fault protection EMC test standards: IEC 61000-4-6 conducted immunity (10 V, Class A) IEC 61000-4-3 radiated immunity (20 V/m, Class A) IEC 61000-4-2 ESD (±6 kV contact, Class B) IEC 61000-4-4 electrical fast transient (EFT) (±4 kV, Class B) IEC 61000-4-5 surge (±4 kV, Class B) 32-lead, 5 mm × 5 mm LFCSP −40°C to +115°C temperature range

16-Channel, 16-Bit Voltage Output denseDAC Features: Download AD5766-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. Complete 16-channel, 16-bit DACs 8 software-programmable output ranges: −20 V to 0 V, −16 V to 0 V, −10 V to 0 V, −10 V to +6 V, −12 V to +14 V, −16 V to +10 V, ±5 V and ±10 V Integrated DAC output buffers with ±20 mA output current capability 4 mm × 4 mm WLCSP package and 40-lead LFCSP package Integrated reference buffers 2 dither signal input pins Channel monitoring multiplexer 1.8 V logic compatibility Temperature range: −40°C to +105°C

4-Channel, I2C, Ultralow Power 12-Bit ADC in 20-Lead LFCSP/TSSOP Features: I2C-compatible serial interface supports standard and fast modes Ultralow power: 90 μW typical at 3 V in fast mode Specified for VDD of 2.7 V to 5.25 V On-chip accurate 2.5 V reference, 5 ppm/°C typical drift 4 single-ended analog input channels ALERT function BUSY function Autocycle mode Wide input bandwidth 68 dB signal-to-noise ratio (SNR) typical at input frequency of 1 kHz Flexible power/throughput rate management No pipeline delays Power-down mode 550 nA typical at VDD = 5.25 V 435 nA typical at VDD = 3 V 20-lead LFCSP and TSSOP packages Temperature range: −40°C to +125°C

2.5 V to 5.5 V, 250 A, 2-Wire Interface, Dual Voltage Output,12-Bit DACs Features: AD5337: 2 buffered 8-bit DACs in 8-lead MSOP AD5338, AD5338-1: 2 buffered 10-bit DACs in 8-lead MSOP AD5339: 2 buffered 12-bit DACs in 8-lead MSOP Low power operation: 250 μA @ 3 V, 300 μA @ 5 V 2-wire (I2C-compatible) serial interface 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes See datasheet for additional features

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference Features: 3 power modes RMS noise Low power: 24 nV rms at 1.17 SPS, gain = 128 (255 µA typical) Mid power: 20 nV rms at 2.34 SPS, gain = 128 (355 µA typical) Full power: 23 nV rms at 9.4 SPS, gain = 128 (930 µA typical) Up to 22 noise free bits in all power modes (gain = 1) Output data rate Full power: 9.38 SPS to 19,200 SPS Mid power: 2.34 SPS to 4800 SPS Low power: 1.17 SPS to 2400 SPS Rail-to-rail analog inputs for gains > 1 Simultaneous 50 Hz/60 Hz rejection at 25 SPS (single cycle settling) Diagnostic functions (which aid safe integrity level (SIL) certification) Crosspoint multiplexed analog inputs 8 differential/15 pseudo differential inputs See data sheet for additional features

4-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference Features: Three power modes RMS noise Low power: 24 nV rms at 1.17 SPS, gain = 128 (255 μA typical) Mid power: 20 nV rms at 2.34 SPS, gain = 128 (355 μA typical) Full power: 23 nV rms at 9.4 SPS, gain = 128 (930 μA typical) Up to 22 noise free bits in all power modes (gain = 1) Output data rate Full power: 9.38 SPS to 19,200 SPS Mid power: 2.34 SPS to 4800 SPS Low power: 1.17 SPS to 2400 SPS Rail-to-rail analog inputs for gains > 1 Simultaneous 50 Hz/60 Hz rejection at 25 SPS (single cycle settling) Diagnostic functions (which aid safe integrity level (SIL) certification Crosspoint multiplexed analog inputs 4 differential/7 pseudo differential inputs Programmable gain (1 to 128) Band gap reference with 10 ppm/°C drift maximum (70 μA) Matched programmable excitation currents Internal clock oscillator On-chip bias voltage generator Low-side power switch General-purpose outputs Multiple filter options Internal temperature sensor Self and system calibration Sensor burnout detection Automatic channel sequencer Per channel configuration Power supply: 2.7 V to 3.6 V and ±1.8 V Independent interface power supply Power-down current: 5 μA maximum Temperature range: −40°C to +125°C 32-lead LFCSP/24-lead TSSOP 3-wire or 4-wire serial interface SPI, QSPI, MICROWIRE, and DSP compatible Schmitt trigger on SCLK ESD: 4 kVAD7124-4-EP Supports defense and aerospace applications (AQEC standard) Download AD7124-4-EP Data Sheet (PDF) Full military temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/19614

250 kSPS, 12- Bit ADC in 6 Lead SC70 Features: Throughput Rate: 250 kSPS Specified for VDD of 2.35 V to 5.25 V Low Power: 3 mW typ at 250 KSPS with 3 V Supplies 12.5 mW typ at 250 KSPS with 5 V Supplies Wide Input Bandwidth: 70 dB SNR at 100 kHz Input Frequency No Pipeline Delays Flexible Power/Serial Clock Speed Management High Speed Serial Interface SPI®/QSPI™/MICROWIRE™/DSP Compatible Standby Mode: 1 µA max 6-Lead SC70 Package 8-Lead µSOIC Package

4-Channel 200 kSPS, 12-Bit A/D Converter with Sequencer in 16-Lead TSSOP Features: Fast throughput rate: 200 kSPS Specified for AVDD of 2.7 V to 5.25 V Low power 3.6 mW max at 200 kSPS with 3 V supply 7.5 mW max at 200 kSPS with 5 V supply 4 (single-ended) inputs with sequencer Wide input bandwidth 70 dB Min SNR at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI® -/QSPI™-/ MICROWIRE™-/DSP-compatible Shutdown mode: 0.5 μA max 16-lead TSSOP package Qualified for automotive applicationsAD7923-EP supports defense and aerospace applications (AQEC standard) Download AD7923-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/12647 DSCC Drawing Number

CMOS, 12-Bit Serial DACPORT Features: 12-Bit CMOS DAC with On-Chip Voltage Reference Output Amplifier Three Selectable Output Ranges -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V Serial Interface 300 kHz DAC Update Rate Small Size: 16-Lead DIP or SOIC Nonlinearity: ±1/2 LSB Tmin to Tmax Low Power Dissipation: 100 mW Typical