The HMC1094LP3E Logarithmic Detector converts RF signals at its input, to a proportional DC voltage at its output. The HMC1094LP3E employs successive compression topology which delivers high dynamic range over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an approximation of the logarithm function. The output of a series of detectors is summed, converted into the voltage domain and buffered to drive the LOGOUT output. The HMC1094LP3E provides a nominal logarithmic slope of +18 mV/dB and an intercept of -113 dBm at 23 GHz. Ideal as a log detector for high volume microwave radio and VSAT applications, the HMC1094LP3E is housed in a compact 3x3 mm RoHS compliant SMT plastic package.Applications Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement

The HMC951B is a compact GaAs MMIC I/Q downconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 13 dB with a noise figure of 2 dB and 24 dB of image rejection across the frequency band. The HMC951B utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency.I and Q mixer outputs are provided and an external 90? hybrid is needed to select the required sideband. The HMC951B is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and is compatible with surface mount manufacturing techniques.Applications Point-to-Point &?Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications

RF/IF AMPLIFIER 19.5DB 1MHZ-2.7GHZ LFCSP-8; Frequency Min:1MHz; Frequency Max:2.7GHz; Gain:19.5dB; Noise Figure Typ:5.6dB; RF IC Case Style:LFCSP; No. of Pins:8Pins; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V

GaAs, pHEMT, MMIC,1/2 W, 20 GHz to 44 GHz, Power Amplifier Features: Output P1dB: 28 dBm (typical at 34 GHz to 44 GHz) PSAT: 30 dBm (typical at 20 GHz to 34 GHz) Gain: 15 dB (typical at 34 GHz to 44 GHz) IP3: 40 dBm (typical) Supply voltage: 5 V at 600 mA Die size: 2.75 mm × 1.805 mm × 0.1 mm

GaAs, pHEMT, MMIC, Low Noise Amplifier, 6 GHz to 18 GHz Features:Single positive supply (self biased)Gain: 24 dB typical at 7 GHz to 16 GHzOIP3: 29 dBm typical at 7 GHz to 16 GHzNoise figure: 1.3 dB typical at 7 GHz to 16 GHz8-lead, 2 mm 2 mm, LFCSP (see the Outline Dimensions section in the data sheet)

GaAs, pHEMT, MMIC, Low Noise Amplifier, 0.025 GHz to 12 GHz Features:Low noise figure: 2.5 dB typical at 0.025 GHz to 10 GHzSingle positive supply (self biased)High gain: 16.5 dB typical at 0.025 GHz to 10 GHzHigh OIP3: 36 dBm typical at 0.025 GHz to 10 GHzRoHS-compliant, 2 mm 2 mm, 6-lead LFCSP

GaAs pHEMT MMIC 2 Watt Power Amplifier, DC - 22 GHz Features: P1dB output power: +32 dBmPsat output power: +34 dBmHigh Gain: 15 dBOutput IP3: 42 dBm Supply Voltage: Vdd = +15V @ 500 mA50 Ohm Matched Input/Output32 Lead 5x5 mm LFCSP Package: 25 mm2

RF AMPLIFIER, 1GHZ TO 8GHZ, LFCSP-EP-16;

LOW NOISE AMPLIFIER, 20GHZ, LFCSP-EP-8;

LOW NOISE AMP, 1 TO 20GHZ, LFCSP-EP-8;