High Linearity Differential RF/IF Amplifier/ADC Driver Features: 50.0dBm OIP3 at 240MHz into a 100Ω Diff Load NF = 3.0dB at 240MHz 20MHz to 2000MHz Bandwidth 15.2dB Gain A-Grade 100% OIP3 Tested at 240MHz 1.0nV/√Hz Total Input Noise S11 < –15dB Up to 1.2GHz S22 < –15dB Up to 1.2GHz >2.75VP-P Linear Output Swing P1dB = 24.0dBm Insensitive to VCC Variation 100Ω Differential Gain-Block Operation Input/Output Internally Matched to 100Ω Diff Single 5V Supply DC Power = 800mW Unconditionally Stable 4mm × 4mm, 24-Lead QFN Package

High Linearity Differential RF/IF Amplifier/ADC Driver Features: 50.0dBm OIP3 at 240MHz into a 100Ω Diff Load NF = 3.0dB at 240MHz 20MHz to 2000MHz Bandwidth 15.2dB Gain A-Grade 100% OIP3 Tested at 240MHz 1.0nV/√Hz Total Input Noise S11 < –15dB Up to 1.2GHz S22 < –15dB Up to 1.2GHz >2.75VP-P Linear Output Swing P1dB = 24.0dBm Insensitive to VCC Variation 100Ω Differential Gain-Block Operation Input/Output Internally Matched to 100Ω Diff Single 5V Supply DC Power = 800mW Unconditionally Stable 4mm × 4mm, 24-Lead QFN Package

High Linearity Differential RF/IF Amplifier/ADC Driver Features: 50.0dBm OIP3 at 240MHz into a 100Ω Diff Load NF = 3.0dB at 240MHz 20MHz to 2000MHz Bandwidth 15.2dB Gain A-Grade 100% OIP3 Tested at 240MHz 1.0nV/√Hz Total Input Noise S11 < –15dB Up to 1.2GHz S22 < –15dB Up to 1.2GHz >2.75VP-P Linear Output Swing P1dB = 24.0dBm Insensitive to VCC Variation 100Ω Differential Gain-Block Operation Input/Output Internally Matched to 100Ω Diff Single 5V Supply DC Power = 800mW Unconditionally Stable 4mm × 4mm, 24-Lead QFN Package

100MHz to 40GHz Linear-in-dB RMS Power Detector with 35dB Dynamic Range Features: Ultra Wide Matched Input Frequency Range: 100MHz to 40GHz 35dB Linear Dynamic Range (< ±1dB Error) 29mV/dB Logarithmic Slope ±1dB Flat Response from 200MHz to 30GHz Accurate RMS Power Measurement of High Crest Factors (Up to 12dB) Modulated Waveforms Low Power Shutdown Mode Low Supply Current: 30mA at 3.3V (Typical) Small 2mm × 2mm Plastic DFN8 Package I-Grade: –40°C to 105°C Rated H-Grade: –40°C to 125°C Rated with Guaranteed Log-Slope and Log-Intercept ESD Rating: 3500V HBM, 1500V CDM

4T4R Direct RF Receiver and Transmitter Features: Flexible, reconfigurable radio common platform design Transmitter/receiver channel bandwidth up to 1.2 GHz (4T4R) RF DAC/RF ADC RF frequency range up to 7.5 GHz On-chip PLL with multichip synchronization External RF clock input option Versatile digital features Selectable interpolation and decimation filters Configurable DDCs and DUCs 8 fine complex DUCs (FDUC) and 4 coarse complex DUCs (CDUC) 8 fine complex DDCs (FDDC) and 4 coarse complex DDCs (CDDC) FDUCs and FDDCs are fully bypassable 2 independent 48-bit NCOs per DUC or DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Programmable delay and gain per transmit data path Coarse DDC delay adjust for DPD observation path Supports real or complex digital data (8-, 12-, or 16-bit) Auxiliary features ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Programmable GPIO pins support toggling between modes TDD power savings option and sharing ADCs SERDES JESD204B or JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JTx) and 8 lanes JESD204B/C receiver (JRx) Supports Subclass 1 Supports multidevice synchronization 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

8 GHz to 16 GHz, 4-Channel, X Band and Ku Band Beamformer Features: 8 GHz to 16 GHz frequency range Half-duplex for transmit and receive modes Single-pin transmit and receive control 360° phase adjustment range 2.8° phase resolution ≥31 dB gain adjustment range ≤0.5 dB gain resolution Bias and control for external transmit and receive modules Memory for 121 prestored beam positions Four −20 dBm to +10 dBm power detectors Integrated temperature sensor Integrated 8-bit ADC for power detectors and temperature sensor Programmable bias modes 4-wire SPI interface

50 GHz to 95 GHz, GaAs, pHEMT, MMIC, Wideband Low Noise Amplifier Features: Gain: 14 dB typical Noise figure: 5 dB typical Input return loss (S11): 15 dB typical Output return loss (S22): 20 dB typical Output power for 1 dB compression (P1dB): 14 dBm typical Saturated output power (PSAT): 18 dBm typical Output third-order intercept (IP3): 21 dBm typical Supply voltage: 3 V at 120 mA 50 Ω matched input/output Die size: 1.9 mm × 1.9 mm × 0.05 mm

RF Mixer Hi IP3 DB Mix w/LO Amp 0.8 - 1.2 GHz

RF Amplifier 1 Watt pow amp Chip, DC - 22 GHz

Sub-GHz Modules WBand lo Noise amp Module, 1 - 12 GHz