High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier Features: Low power: 330 μA maximum quiescent current Rail-to-rail output Low noise and distortion 8 nV/√Hz maximum input voltage noise at 1 kHz 0.15 μV p-p RTI noise (G = 100) 0.5 ppm nonlinearity with 2 kΩ load (G = 1) Excellent ac specifications 80 dB minimum CMRR at 10 kHz (G = 1) 2.2 MHz bandwidth (G = 1) High precision dc performance (AD8422BRZ) 150 dB minimum CMRR (G = 1000) 0.04% maximum gain error (G = 1000) 0.3 μV/°C maximum input offset drift 0.5 nA maximum input bias current Wide supply range 4.6 V to 36 V single supply ±2.3 V to ±18 V dual supply Input overvoltage protection: 40 V from opposite supply Gain range: 1 to 1000 Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC_N

60 MHz, 2000 V/s, Monolithic Op Amp with Quad Low Noise Features: Wide bandwidth 60 MHz at gain of −1  33 MHz at gain of −10  Slew rate: 2000 V/μs  20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω  Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz  Differential phase error: 0.16° at 4.4 MHz  Low offset voltage: 150 μV maximum (B Grade) Low quiescent current: 6.5 mA  Available in tape and reel in accordance with EIA-481-A standard

+5 Volt, Serial Input, Dual 12-Bit DAC Features: Complete Dual 12-Bit DAC No External Components +5 Single-Supply Operation ±10% 4.095 V Full Scale (1 mV/LSB) Buffered Voltage Outputs Low Power: 5 mW/DAC Space Saving 1.5mm Height SO-14 Package

Digitally Programmable Sensor Signal Amplifier with EMI Filters Features: EMI filters at input pins Specified from −40°C to +140°C Low offset voltage: 10 μV maximum Low input offset voltage drift: 65 nV/°C maximum High CMRR: 94 dB minimum Digitally programmable gain and output offset voltage Programmable output clamp voltage Open and short wire fault detection Low-pass filtering Single-wire serial interface Stable with any capacitive load SOIC_N and LFCSP_VQ packages 4.5 V to 5.5 V operation

Ultrafast 7 ns Single Supply Comparator Features: 7 ns propagation delay at 5 V Single supply operation: 3 V to 10 V Low power Latch function TSSOP packages

+2.5 V to 5.5 V, 400 A, Quad Rail-To-Rail Output 12-Bit DAC Features: Four 12-Bit DACS in 16-Lead TSSOP Low Power: 500 µA @ 5 V, 400 µA @ 3 V Power-Down to 300 nA @ 5 V, 90nA @ 3 V Guaranteed Monotonic by Design Power-On-Reset to Zero Volts Double-Buffered Input Logic Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Range: O-VREF or O-2VREF Simultaneous Update of DAC Outputs via LDAC pin (active low) Asynchronous Clear Facility via CLR pin (active low) SDO Daisy-Chaining Option Buffered/Unbuffered Reference Input Options for each DAC pair

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference Features: 3 power modes RMS noise Low power: 24 nV rms at 1.17 SPS, gain = 128 (255 µA typical) Mid power: 20 nV rms at 2.34 SPS, gain = 128 (355 µA typical) Full power: 23 nV rms at 9.4 SPS, gain = 128 (930 µA typical) Up to 22 noise free bits in all power modes (gain = 1) Output data rate Full power: 9.38 SPS to 19,200 SPS Mid power: 2.34 SPS to 4800 SPS Low power: 1.17 SPS to 2400 SPS Rail-to-rail analog inputs for gains > 1 Simultaneous 50 Hz/60 Hz rejection at 25 SPS (single cycle settling) Diagnostic functions (which aid safe integrity level (SIL) certification) Crosspoint multiplexed analog inputs 8 differential/15 pseudo differential inputs See data sheet for additional features

18-Bit, 1.25 MSPS PulSAR A/D Converter Features: Throughput: 1.25 MSPS INL: ±2 LSB typical, ±3 LSB max; ±8 ppm of full scale 18-bit resolution with no missing codes Dynamic range: 95.5 dB SINAD: 93.5 dB typical @ 20 kHz (VREF = 2.5 V) THD: −112 dB typical @ 20 kHz (VREF = 2.5 V) No pipeline delay (SAR architecture) Pb-free, 48-lead LQFP and 48-lead LFCSP Pin compatible with the AD7641 and other PulSAR ADCs 2.048 V internal reference: typical drift 10 ppm/°C; TEMP output Differential input range: ±VREF (VREF up to 2.5 V) Parallel (18-, 16-, or 8-bit bus) and serial 5 V/3.3 V/2.5 V interface SPI®/QSPI™/MICROWIRE™/DSP compatible Single 2.5 V supply operation Power dissipation 65 mW typical @ 1.25 MSPS with internal REF 2 W in power-down mode

16-Bit, 8-Channel,250 kSPS PulSAR ADC Features: Download AD7689-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. 16-bit resolution with no missing codes 4-channel (AD7682)/8-channel (AD7689) multiplexer with choice of inputs Unipolar single-ended Differential (GND sense) Pseudobipolar Throughput: 250 kSPS INL: ±0.4 LSB typical, ±1.5 LSB maximum (±23 ppm or FSR) Dynamic range: 93.8 dB SINAD: 92.5 dB at 20 kHz THD: −100 dB at 20 kHz Analog input range: 0 V to VREF with VREF up to VDD Multiple reference types Internal selectable 2.5 V or 4.096 V External buffered (up to 4.096 V) External (up to VDD) Internal temperature sensor (TEMP) Channel sequencer, selectable 1-pole filter, busy indicator No pipeline delay, SAR architecture Single-supply 2.3 V to 5.5 V operation with 1.8 V to 5.5 V logic interface Serial interface compatible with SPI, MICROWIRE, QSPI, and DSP Power dissipation 3.5 mW at 2.5 V/200 kSPS 12.5 mW at 5 V/250 kSPS Standby current: 50 nA Low cost grade available 20-lead 4 mm × 4 mm LFCSP package 20-lead 2.4 mm × 2.4 mm WLCSP package

3V/5V, 1 mW, 2-Channel Differential, 16-Bit Sigma-Delta ADC Features: Two Fully Differential Input Channel ADCs Programmable Gain Front End Gains from 1 to 128 Three-Wire Serial Interface SPI®, QSPI™, MICROWIRE™ and DSP Compatible Schmitt Trigger Input on SCLK Ability to Buffer the Analog Input 2.7 V to 3.3 V or 4.75 V to 5.25 V Operation Power Dissipation 1 mW max @ 3 V Standby Current 8 µA max 16-Lead DIP, 16-Lead SOIC and TSSOP Packages