Precision, Miniature MEMS IMU Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2.3°/hr in-run bias stability (ADIS16507-1) 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1) ±0.25° axis to axis misalignment error Triaxial, digital accelerometer, ±392 m/sec2 dynamic range 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ Triaxial, delta angle and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, scaled, and output On demand self-test of inertial sensors On demand self-test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 19,600 m/sec2 mechanical shock survivability Operating temperature range: −40°C to +105°C

1 MHz to 1.2 GHz VGA with 30 dB Gain Control Range Features: Voltage-controlled amplifier/attenuator Operating frequency: 1 MHz to 1.2 GHz Optimized for controlling output power High linearity: OIP3 47 dBm @ 100 MHz Output noise floor: −149 dBm/Hz @ maximum gain Input impedance: 50 Ω Output impedance: 20 Ω Wide gain-control range: 30 dB Linear-in-dB gain control function: 40 mV/dB Single-supply voltage: 4.75 V to 5.25 V

400 MHz TO 4000 MHz Low Noise Amplifier Features: Operation from 400 MHz to 4000 MHz Noise figure of 0.8 dB at 900 MHz Requires few external components Integrated active bias control circuit Integrated dc blocking capacitors Adjustable bias for low power applications Single-supply operation from 3 V to 5 V Gain of 20.8 dB at 900 MHz OIP3 of 37.0 dBm at 900 MHz P1dB of 21.8 dBm at 900 MHz Small footprint LFCSP Pin-compatible version with 21.5 dB gain available

21.2 GHz to 23.6 GHz, Low Noise Amplifier Features: Frequency range: 21.2 GHz to 23.6 GHz Typical gain of >22.5 dB Low noise input Noise figure 3.3 dB typical at 21.2 GHz 3.4 dB typical at 23.6 GHz High linearity input ≥1.0 dBm typical input third-order intercept (IIP3) −8 dBm input 1 dB compression point (P1dB) at 23.6 GHz Matched 50 Ω single-ended input Matched 100 Ω differential outputs 8-lead, 2.00 mm × 2.00 mm LFCSP microwave packaging

Microprocessor Supervisory Circuit Features:Pin-compatible with MAX1232 and Dallas DS1232Adjustable precision voltage monitor with 4.5 V and 4.75 V optionsAdjustable strobe monitor with 150 ms, 600 ms, or 1.2 sec optionsNo external componentsSpecified from 40C to +85C

Cascadable Super Sequencer with Margin Control and Fault Recording Features: Complete supervisory and sequencing solution for up to 17 supplies Expandable to 257 supplies with additional ADM1266 ICs connected to the 2-wire interdevice bus Fully programmable sequencing engine 17 supply fault detectors enable real time supervision of supplies 0.4 V to 15 V on VH1 to VH4 (VHx) 0.4 V to 5 V on VP1 to VP13 (VPx) Device powered by the higher of VH1 and VH2 inputs for improved operating redundancy 12-bit ADC for readback of all supervised voltages Black box nonvolatile fault recording 16 PDIOs 9 GPIOs 9 voltage output 8-bit DACs allow voltage margining adjustment via dc-to-dc converter trim/feedback node Main and backup memory Industry standard PMBus interface compliant Available in a 9 mm × 9 mm, 64-lead package

High Voltage Input Protection Device Features: Controls supply voltages from 4 V to 60 V Gate drive for low voltage drop reverse supply protection Gate drive for P-channel FETs Inrush current limiting control Adjustable current limit Foldback current limiting Automatic retry or latch-off on current fault Programmable current-limit timer for safe operating area (SOA) Power-good and fault outputs Analog undervoltage (UV) and overvoltage (OV) protection 16-lead, 3 mm × 3 mm LFCSP 16-lead QSOP

High Voltage Input Protection Device Features: Controls supply voltages from 4 V to 60 V Gate drive for low voltage drop reverse supply protection Gate drive for P-channel FETs Inrush current limiting control Adjustable current limit Foldback current limiting Automatic retry or latch-off on current fault Programmable current-limit timer for safe operating area (SOA) Power-good and fault outputs Analog undervoltage (UV) and overvoltage (OV) protection 16-lead, 3 mm × 3 mm LFCSP 16-lead QSOP

High Voltage Input Protection Device Features: Controls supply voltages from 4 V to 60 V Gate drive for low voltage drop reverse supply protection Gate drive for P-channel FETs Inrush current limiting control Adjustable current limit Foldback current limiting Automatic retry or latch-off on current fault Programmable current-limit timer for safe operating area (SOA) Power-good and fault outputs Analog undervoltage (UV) and overvoltage (OV) protection 16-lead, 3 mm × 3 mm LFCSP 16-lead QSOP

Dual Processor Supervisors with Watchdog Features: Dual supervisory circuits Supply voltage range of 2.7 V to 5.5 V Pretrimmed threshold options: 1.8 V, 2.5 V, 3.3 V, and 5 V Adjustable 0.6 V voltage reference Maximum supply current of 40 μA 140 ms (minimum) reset timeout Watchdog timer with 1.6 sec (typical) timeout RESET valid from VDD ≥ 1.1 V Push-pull RESET and RESET outputs 8-lead, narrow body SOIC package Temperature range: −40°C to +85°C