Dual, 12-Bit, 1 GSPS, Digital-to-Analog Converter Features: Low power: 1.0 W @ 1 GSPS, 600 mW @ 500 MSPS, full operating conditions Single carrier W-CDMA ACLR = 80 dBc @ 80 MHz IF Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω Novel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidth Auxiliary DACs allow control of external VGA and offset control Multiple chip synchronization interface High performance, low noise PLL clock multiplier Digital inverse sinc filter 100-lead, exposed paddle TQFP

Broadband Modem Mixed-Signal Front End Features: Low cost, 3.3 V CMOS MxFE® for broadband modems 10-bit digital-to-analog converter (DAC) 2×/4× interpolation filter 250 MSPS DAC update rate 10-bit, 75 MSPS ADC Low noise RxPGA Dual channel muxed input 6 dB input overload attenuator −12 dB to +48 dB (without attenuator) Third-order programmable low-pass filter Flexible digital datapath interface Half-duplex and full-duplex operation Programmable delay Tx driver disable signal Various power-down/reduction modes Internal clock multiplier (PLL) 2 auxiliary programmable clock outputs 64-lead LFCSP

High Performance 8-Bit Display Interface Features: 8-bit analog-to-digital converters 140 MSPS maximum conversion rate Low PLL clock jitter at 140 MSPS Automatic gain matching Automated offset adjustment 2:1 input mux Power-down via dedicated pin or serial register 4:4:4, 4:2:2, and DDR output format modes Variable output drive strength Odd/even field detection External clock input Regenerated Hsync output

5V, 12-Bit, Serial 220 kSPS ADC in a 8-Lead Package Features: Fast 12-Bit ADC with 220 kSPS Throughput Rate 8-Lead SOIC Single 5 V Supply Operation High Speed, Flexible, Serial Interface that Allows Interfacing to 3 V Processors On-Chip Track/Hold Amplifier Selection of Input Ranges: ±10 V for AD7898-10 ±2.5 V for AD7898-3 High Input Impedance Low Power: 22.5 mW Max

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

110 MSPS/140 MSPS Analog Interface for Flat Panel Displays Features: Automated clamping level adjustment 140 MSPS maximum conversion rate 300 MHz analog bandwidth 0.5 V to 1.0 V analog input range 500 ps p-p PLL clock jitter at 110 MSPS 3.3 V power supply Full sync processing Sync detect for hot plugging Midscale clamping Power-down mode Low power: 500 mW typical 4:2:2 output format mode

Ultrafast 3.3 V Single-Supply Comparator w/Reduced Swing PECL (RSPECL) Output Drivers Features: 3.3 V/5.2 V single-supply operation 150 ps propagation delay 15 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 80 ps minimum pulse width 35 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) On-chip terminations at both input pins Robust inputs with no output phase reversal Resistor-programmable hysteresis Differential latch control Extended industrial −40°C to +125°C temperature range

Ultrafast SiGe Voltage Comparator (Featuring Reduced Swing NECL Output Drivers) Features: 180 ps propagation delay 25 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 100 ps minimum pulse width 37 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) −2 V to +3 V input range with +5 V/−5 V supplies On-chip terminations at both input pins Resistor-programmable hysteresis Differential latch control Power supply rejection > 70 dB

Single, Integer-N 550 MHz PLL Features: ADF4116: 550 MHz ADF4117: 1.2 GHz ADF4118: 3.0 GHz 2.7 V to 5.5 V power supply Separate VP allows extended tuning voltage in 3 V systems Y Grade: −40°C to +125°C Dual-modulus prescaler ADF4116: 8/9 ADF4117/ADF4118: 32/33 3-wire serial interface Digital lock detect Power-down mode Fastlock mode

14-Bit, 80 MSPS/105 MSPS/125 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR = 71.7 dBc (72.7 dBFS) to 70 MHz input SFDR = 85 dBc to 70 MHz input Low power: 395 mW @ 125 MSPS Differential input with 650 MHz bandwidth On-chip voltage reference and sample-and-hold amplifier DNL = ±0.4 LSB Flexible analog input: 1 V p-p to 2 V p-p range Offset binary, Gray code, or twos complement data format Data output clock and clock duty cycle stabilizer Serial port control Built-in selectable digital test pattern generation Programmable clock and data alignment