Low Complexity, 2-Port Ethernet Switch with Integrated 10BASE-T1L PHYs Features: 10BASE-T1L IEEE® Std 802.3cg-2019™ compliant Supports 1.0 V p-p & 2.4 V p-p transmit Levels Cable reach Up to 1700 meters with 1.0 V p-p transmit level Up to 1700 meters with 2.4 V p-p transmit level Low power consumption Low power consumption - single supply 80 mW typ Dual supply 1.0 V p-p: 77 mW typical Integrated switch with SPI interface 10 Mbps full duplex 16 MAC addresses supported for frame forwarding Supports OPEN Alliance 10BASE-T1x MACPHY SPI MDIO memory map accessible via SPI Supports high & low priority queues Total buffer memory of 28 kB shared between ports and host Autonegotiation capability Managed or unmanaged configuration Cut through or store and forward operation IEEE 1588 time stamp capture on transmit and receive Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Port dedicated statistics counters Link and cable diagnostics 25 MHz crystal or external clock input Single or dual supply with 1.8 V or 3.3 V operation Integrated power supply monitoring and POR Small package: 48-lead, 7 mm × 7 mm LFCSP Temperature range Industrial: 40°C to +85°C Extended: 40°C to +105°C

Precision MEMS IMU Module Features: Triaxial, digital gyroscope  ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16465-1)  0.15°/√hr angular random walk (ADIS16465-1 and ADIS16465-2)  ±0.05° axis to axis misalignment error  Triaxial, digital accelerometer, ±8 g 3.6 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C   SPI-compatible data communications Programmable operation and control  Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C

Precision, Miniature MEMS IMU Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2.3°/hr in-run bias stability (ADIS16507-1) 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1) ±0.25° axis to axis misalignment error Triaxial, digital accelerometer, ±392 m/sec2 dynamic range 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ Triaxial, delta angle and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, scaled, and output On demand self-test of inertial sensors On demand self-test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 19,600 m/sec2 mechanical shock survivability Operating temperature range: −40°C to +105°C

Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier Features: Low power: 1.1 mA/amp Low wideband noise 2.1 nV/√Hz 1.4 pA/√Hz Low 1/f noise 7 nV/√Hz @ 10 Hz 13 pA/√Hz @ 10 Hz Low distortion: −105 dBc @ 100 kHz, VO = 2 V p-p High speed 80 MHz, −3 dB bandwidth (G = +1) 12 V/μs slew rate 175 ns settling time to 0.1% Low offset voltage: 0.3 mV maximum Rail-to-rail output Power down Wide supply range: 2.7 V to 12 V

Quad 12-Bit Serial Voltage Output DAC Features: Guaranteed monotonic over temperature Excellent matching between DACs Unipolar or bipolar operation Buffered voltage outputs High speed serial digital interface Reset-to-zero scale or midscale Wide supply range, +5 V only to ±15 V Low power consumption (35 mW maximum) Available in 16-Lead PDIP, SOIC, and CERDIP packages

12V, 30mA Flash Memory Programming Supply Features: Regulated 12V ±5% Output Voltage No Inductors Supply Voltage Range: 4.75V to 5.5V Guaranteed 30mA Output Low Power: Icc = 500µA Icc in Shutdown: 0.5µA 8-Pin PDIP or SO-8 Package

High Efficiency Battery Charger/USB Power Manager Features: Switching Regulator Makes Optimal Use of Limited Power Available from USB Port to Charge Battery  and Power Application 180mΩ Internal Ideal Diode Plus Optional External Ideal Diode Controller Seamlessly Provides Low  Loss Power Path When Input Power is Limited or  Unavailable Full Featured Li-Ion/Polymer Battery Charger VBUS Operating Range: 4.25V to 5.5V (7V Absolute  Maximum—Transient) 1.2A Maximum Input Current Limit 1.5A Maximum Charge Current with Thermal Limiting Bat-Track Adaptive Output Control Slew Control Reduces Switching EMI Low Profile (0.75mm) 14-Lead 4mm × 3mm DFN Package

Micropower Low Noise Boost Converters with Output Disconnect Features: Low Quiescent Current 65µA in Active Mode 1µA in Shutdown Mode Switching Frequency is Non-Audible Over Entire Load Range Integrated Power NPN: 350mA Current Limit (LT3494A) 180mA Current Limit (LT3494) Integrated Schottky Diode Integrated Output Disconnect Integrated Output Dimming Wide Input Range: 2.3V to 16V Wide Output Range: Up to 40V Tiny 8-Lead 3mm × 2mm DFN Package

2.25MHz, 800mA Synchronous Step-Down Regulator in ThinSOT Features: High Efficiency: Up to 95% Low Output Ripple (<20mVP-P): Burst Mode® Operation: IQ = 16µA 2.5V to 5.5V Input Voltage Range 2.25MHz Constant Frequency Operation Synchronizable to External Clock No Schottky Diode Required Stable with Ceramic Capacitors Low Dropout Operation: 100% Duty Cycle 0.6V Reference Allows Low Output Voltages Shutdown Mode Draws < 1µA Supply Current ±2% Output Voltage Accuracy Current Mode Operation for Excellent Line and Load Transient Response Overtemperature Protected Low Profile (1mm) ThinSOT™ Package

Half-Bridge N-Channel Power MOSFET Driver with Boost Regulator Features: Floating Top Driver Switches Up to 60V Internal Boost Regulator for DC Operation 180ns Transition Times Driving 10,000pF Adaptive Nonoverlapping Gate Drives Prevent Shoot-Through Drives Gate of Top N-Channel MOSFET Above Supply Top Drive Maintained at High Duty Cycles TTL/CMOS Input Levels Undervoltage Lockout with Hysteresis Operates at Supply Voltages from 10V to 15V Separate Top and Bottom Drive Pins