2 A/1.2 A DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 2.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 1.2 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set

20 V, 500 mA, Low Noise LDO Regulator with Soft Start Features: Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 μV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −2% to +1%, TJ = −40°C to +125°C −1.25% to +1%, TJ = 0°C to +85°C Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 μA at VIN = 12 V, stable with small 1 μF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.22 V to 19 V Programmable soft start for inrush current control Foldback current-limit and thermal overload protection User programmable precision UVLO/enable Power-good indicator 8-lead LFCSP and 8-lead SOIC packages

Integrated Optical Module for Smoke Detection Features: Supports UL-217 edition 8/ UL-568 ed. 7; EN-54; GB..; ISO Lowers Nuisance Alarms using a Dual Wavelength detection with higher SNR and dynamic range. 3X Lower power dissipation enables smaller/ cheaper batteries Integrated Optical Module (3.8mm x 5mm x 0.9mm with 1 blue LED, 1 IR LED and 2 Photo diodes) simplifies EMC design, allows for greater diversity of industrial design options and results in 75% fewer discrete components. Loop calibration at final test reduces calibration challenges with smoke detector products. Supported by ADI designed smoke chamber manufactured by Accumold, 28800X. (Please see EVAL-CHAMBER Mechanical Dimensions (PDF), also under Resources below)

Low Noise, Micropower 5.0 V Precision Voltage Reference Features: 6.0 V to 15 V supply range Supply current: 15 μA maximum Low noise: 15 μV p-p typical (0.1 Hz to 10 Hz) High output current: 5 mA Pin-compatible with the REF02/REF19xADR293-EP supports defense and aerospace applications (AQEC standard) Download ADR293-EP Data Sheet (pdf) See datasheet for additional features

Precision Micropower Shunt Mode Voltage Reference Applications (2.048 Vout) Features: Ultracompact SC70 and SOT-23 packages Low temperature coefficient: 75 ppm/°C (maximum) Pin compatible with LM4040/LM4050 Initial accuracy: ±0.1% No external capacitor required Wide operating current range: 50 µA to 15 mA Extended temperature range: −40°C to +125°C Qualified for automotive applications

Low Noise Amplifier Chip, 2 - 4 GHz Features: Gain Flatness: 0.2 dB Output IP3: +36 dBm Gain: 10 dB DC Supply: +6V @ 100mA 50 Ohm Matched Input/Output Die Size: 1.32 x 1.21 x 0.10 mm

24 MHz Rail-to-Rail Dual Op Amp Features: Offset voltage: 2.5 mV maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nV/√Hz Wide bandwidth: 24 MHz Slew rate: 11 V/μs Short-circuit output current: 120 mA Qualified for automotive applications No phase reversal Low input bias current: 1 pA Low supply current per amplifier: 2 mA maximum Unity gain stable

Multiplexer Switch ICs DUAL 4 CHANNEL MUX.

LDO Voltage Regulators PADM1270ACPZ-R7DO 1.3Vo

Low Cost, High Speed, Rail-to-Rail Amplifier Features: High speed and fast settling on 5 V 110 MHz, −3 dB bandwidth (G = +1) (AD8051/AD8052) 150 MHz, −3 dB bandwidth (G = +1) (AD8054) 145 V/μs slew rate 50 ns settling time to 0.1% Single-supply operation Output swings to within 25 mV of either rail Input voltage range: −0.2 V to +4 V; VS = 5 V Video specifications (G = +2) 0.1 dB gain flatness: 20 MHz; RL = 150 Ω Differential gain/phase: 0.03%/0.03° Low distortion −80 dBc total harmonic @ 1 MHz, RL = 100 Ω Outstanding load drive capability Drives 45 mA, 0.5 V from supply rails (AD8051/AD8052) Drives 50 pF capacitive load (G = +1) (AD8051/AD8052) Low power: 2.75 mA/amplifier (AD8054) Low power: 4.4 mA/amplifier (AD8051/AD8052)