20V High Efficiency Nanopower Step-Down Regulator Features: 720nA Input IQ in Regulation (No Load), VIN = 4V 820nA Input IQ in Regulation (No Load), VIN = 20V 400nA Input IQ in UVLO 2.7V to 20V Input Operating Range Up to 50mA of Output Current Pin Selectable Output Voltages: 1.2V, 1.5V, 1.8V, 2.5V (LTC3388-1) 2.8V, 3.0V, 3.3V, 5.0V (LTC3388-3) High Efficiency Hysteretic Synchronous DC/DC Conversion Standby Mode Disables Buck Switching Available in 10-Lead MSE and 3mm × 3mm DFN Packages

30MHz to 1.4GHz IQ Demodulator with IIP2 and DC Offset Control Features: I/Q Bandwidth of 530MHz or Higher High IIP3: 31dBm at 450MHz, 28dBm at 900MHz High IIP2: 70dBm at 450MHz, 65dBm at 900MHz User Adjustable IIP2 to >80dBm User Adjustable DC Offset Null High Input P1dB: 13.1dBm at 900MHz Image Rejection: 45dB at 900MHz Noise Figure: 9.9dB at 450MHz 10dB at 900MHz Conversion Gain: 5.4dB at 450MHz 5.7dB at 900MHz Shutdown Mode Operating Temperature Range (TC): –40°C to 105°C 24-Lead 4mm × 4mm QFN Package

High Voltage High Current Controller for Battery Charging with Maximum Power Point Control Features:Maximum Power Control: Solar Panel Input CompatibleComplete High Performance Battery Charger When Paired with a DC/DC ConverterWide Input and Output Voltage Range: 3V to 60VInput Ideal Diode for Low Loss Reverse Blocking and Load SharingOutput Ideal Diode for Low Loss PowerPath™ and Load Sharing with the BatteryProgrammable Charge Current: ±1% Accuracy±0.25% Accurate Programmable Float VoltageProgrammable C/X or Timer Based Charge TerminationNTC Input for Temperature Qualified Charging28-Lead 4mm × 5mm QFN or SSOP Packages

40V, 2.1A Low Dropout Adjustable Linear Regulator with Monitoring and Cable Drop Compensation Features: Wide Input Voltage Range: 1.4V to 40V 1 Resistor Sets Output Voltage: 0.4V to 32V Output Current: 2.1A ±2% Tolerance Over Line, Load and Temperature Output Current Monitor: IMON = IOUT/1000 Temperature Monitor with Programmable Thermal Limit Programmable Cable Drop Compensation Parallel Multiple Devices for Higher Current Dropout Voltage: 330mV 1 Capacitor Soft-Starts Output and Decreases Noise Low Output Noise: 40μVRMS (10Hz to 100kHz) Precision, Programmable External Current Limit Power Good Flag with Programmable Threshold Ceramic Output Capacitors: 10μF Minimum Quiescent Current in Shutdown: <1μA Reverse-Battery, -Current and -Output Protection Available in 5mm × 4mm 16-Lead DFN, 16-Lead TSSOP, 7-Lead DD-Pak and 7-Lead TO-220.LT3086-EP Supports defense and aerospace applications (AQEC standard) Download LT3086-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/22602

42V, 2.5A Synchronous Step-Down Regulator with 2.5A Quiescent Current Features: Wide Input Voltage Range: 3.4V to 42V Ultralow Quiescent Current Burst Mode® Operation: 2.5μA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P High Efficiency Synchronous Operation: 96% Efficiency at 1A, 5VOUT from 12VIN 94% Efficiency at 1A, 3.3VOUT from 12VIN Fast Minimum Switch-On Time: 50ns Low Dropout Under All Conditions: 200mV at 1A Allows Use Of Small Inductors Low EMI Adjustable and Synchronizable: 200kHz to 2.2MHz Current Mode Operation Accurate 1V Enable Pin Threshold Internal Compensation Output Soft-Start and Tracking Small Thermally Enhanced 16-Lead MSOP Package AEC-Q100 Qualified for Automotive Applications

Precision, Low Power Rail-to-Rail Input/Output Differential Op Amp/SAR ADC Driver Features: 1mA Supply Current Single 2.8V to 5.25V supply Fully Differential Input and Output 200μV Max Offset Voltage 260nA Max Input Bias Current Fast Settling: 550ns to 18-Bit, 8VP-P Output Low Distortion: –116dBc at 1kHz, 8VP-P Rail-to-Rail Inputs and Outputs 3.9nV/√Hz Input-Referred Noise 180MHz Gain-Bandwidth Product 34MHz –3dB Bandwidth Low Power Shutdown: 70μA 8-Lead MSOP and 3mm × 3mm 8-Lead DFN Packages

1.8A Quiescent Current, 15V, 300mA Synchronous Step-Down DC/DC Converter Features: Ultralow Quiescent Current: 1.8μA Synchronous Rectification: Efficiency Up to 95% Wide VIN Range: 2.5V to 15V Wide VOUT Range: 0.6V to 13.8V 300mA Output Current User-Selectable Automatic Burst Mode® or Forced Continuous Operation Accurate and Programmable RUN Pin Threshold 1.2MHz Fixed Frequency PWM Internal Compensation Power Good Status Output for VOUT Available in Thermally Enhanced 3mm × 3mm × 0.75mm, 10-Pin DFN and 10-Pin MSOP Packages

Small, 3.75 kV RMS Quad Digital Isolators (4/0 Channel Directionality) Features: Up to 25 Mbps data rate (NRZ) Low propagation delay: 25 ns typical Low dynamic power consumption 1.8 V to 5 V level translation High common-mode transient immunity: >25 kV/µs Output default select 20-lead, RoHS-compliant, SSOP package See data sheet for additional features

5 KV rms Isolated Precision Half-Bridge Driver, 4 A Output Features: 4 A peak output current Working voltage High-side or low-side relative to input: 537 V peak High-side to low-side differential: 800 V peak High frequency operation: 1 MHz maximum  3.3 V to 5 V CMOS input logic 4.5 V to 18 V output drive  UVLO at 2.5 V VDD1 ADuM3223A/ADuM4223A UVLO at 4.1 V VDD2 ADuM3223B/ADuM4223B UVLO at 7.0 V VDD2 ADuM3223C/ADuM4223C UVLO at 11.0 V VDD2 Precise timing characteristics  54 ns maximum isolator and driver propagation delay 5 ns maximum channel-to-channel matching CMOS input logic levels  High common-mode transient immunity:>25 kV/μs Enhanced system-level ESD performance per IEC 61000-4-x  High junction temperature operation: 125°C  Thermal shutdown protection  Default low output Safety and regulatory approvals ADuM4223 wide-body, 16-lead SOIC UL recognition per UL 1577  5000 V rms for 1 minute SOIC long package  CSA Component Acceptance Notice 5A  VDE certificate of conformity  DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak  Qualified for automotive applications

Low Emission Isolated DC to DC Converter Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM5020 60 mA output current for ADuM5028 Meets CISPR22 Class B emissions limits at full load on a 2-layer PCB 16-lead SOIC_W package with 7.8 mm minimum creepage 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition (pending) 3000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011 (pending)