0.5 GHz to 19 GHz Broadband Bi-Directional Single Channel True Time Delay Unit Features:0.5 GHz to 19 GHz frequency rangeProgrammable Time Delay: 7-bit resolutionProgrammable Time Delay ModesTD_Mode0: 0 to 508ps range, 4ps Standard resolutionTD_Mode1: 0 to 254ps range, 2ps High resolutionProgrammable Attenuation: 6-bit resolution31.5 dB adjustment range0.5 dB step sizeFully programmable via a 3-wire or 4-wire SPI interfaceSPI Programmable and Daisy Chaining selectablePower Dissipation: 1 mW with 1.2V and 1.0V Dual Supplies14-pin 2x3mm LFCSP

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator Features: Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch TTL-/CMOS-compatible output stage 40 ns propagation delay Low power 1 mW at 2.5 V Shutdown pin Programmable hysteresis Power supply rejection > 60 dB −40°C to +125°C operation

Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA

Low Capacitance, Low Charge Injection, 15 V/+12 V iCMOS Quad SPST Switch Features: 1 pF off capacitance 2.6 pF on capacitance <1 pC charge injection 33 V supply range 120 Ω on resistance Fully specified at ±15 V, +12 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 16-lead TSSOP and 16-lead LFCSP Typical power consumption: <0.03 μW

LC2MOS 15 V 4 Channel High Performance Analog Multiplexer Features: 44 V supply maximum ratings VSS to VDD analog signal range Low on resistance (100 Ω maximum) Low power (ISUPPLY < 75 µA) Fast switching Break-before-make switching action Plug-in replacement for DG408

16-Channel Multiplexer (Superior DG506A Replacement) Features: 44 V Supply Maximum Ratings VSS to VDD Analog Signal Range Single/Dual Supply Specifications Available in 28-Lead DIP, SOIC, PLCC, TSSOP and LCCC Packages Wide Supply Range (10.8 V to 16.5 V) Low Power Dissipation (28 µW max) Low Leakage (20 pA typ) See datasheet for additional features

Fault Protection, 6 RON, SPST Switch with 0.6 k Feedback Channel Features: Analog output protection and detection solution Overvoltage protection up to 60 V on S and SFB pins Power off protection up to 60 V on S and SFB pins Integrated 0.6 k secondary feedback channel Known output under all conditions User enabled, power-on condition pulls source to 0 V Known state without digital inputs present Latch-up immune Optimized resistance for measurement channel and feedback channel Low on resistance of 6 typical on signal channel Ultraflat, on resistance on signal channel 3 mm 2 mm LFCS VSS to VDD 2 V signal range Fully specified at ±15 V, ±20 V, +12 V, and +36 V ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation

150 mA, Low Dropout, CMOS Linear Regulator Features: Maximum output current: 150 mA Input voltage range: 2.5 V to 5.5 V Light load efficient IGND = 35 μA with zero load IGND = 40 μA with 100 μA load Low shutdown current: <1 μA Low dropout voltage: 150 mV @ 150 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±2% Stable with small 1 μF ceramic output capacitor 16 fixed output voltage options: 0.75 V to 3.3 V (ADP1710) Adjustable output voltage option: 0.8 V to 5.0 V (ADP1710 Adjustable) 16 fixed output voltage options with reference bypass: 0.75 V to 3.3 V (ADP1711) High PSRR: 69 dB @ 1 kHz

300 mA, Low Dropout CMOS Linear Regulator Features: Maximum output current: 300 mA Input voltage range: 2.5 V to 5.5 V Light load efficient IGND = 75 μA with 100 μA load Low shutdown current: <1 μA Very low dropout voltage: 170 mV @ 300 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±2% 16 fixed output voltage options with tracking: 0.75 V to 3.3 V Low output noise: 40 μV rms High PSRR: 72 dB @ 1 kHz Stable with small 2.2 μF ceramic output capacitor See data sheet for additional features

1 A, Low VIN, Low Noise, CMOS Linear Regulator Features: 1 A maximum output current Low input voltage supply range VIN = 1.10 V to 1.98 V, no external bias supply required Fixed output voltage range: VOUT_FIXED = 0.9 V to 1.5 V Adjustable output voltage range: VOUT_ADJ = 0.5 V to 1.5 V Ultralow noise: 2 μV rms, 100 Hz to 100 kHz Noise spectral density 4 nV/√Hz at 10 kHz 3 nV/√Hz at 100 kHz Low dropout voltage: 30 mV typical at 1 A load Operating supply current: 4.5 mA typical at no load ±1.5% fixed output voltage accuracy over line, load, and temperature Excellent power supply rejection ratio (PSRR) performance 67 dB typical at 10 kHz at 1 A load 51 dB typical at 100 kHz at 1 A load Excellent load/line transient response Soft start to reduce inrush current Optimized for small 10 μF ceramic capacitors Current-limit and thermal overload protection Power-good indicator Precision enable 16-lead, 3 mm × 3 mm LFCSP package AEC-Q100 qualified for automotive applications