5.5 GHz to 18 GHz, GaAs, pHEMT, MMIC, Medium Power Amplifier Features: High saturated output power: 26 dBm with 24% PAE  High gain: 24 dB typical High output IP3: 36 dBm typical High output P1dB: 25.5 dBm Die size: 2.19 mm × 1.05 × 0.1 mm

Digitally Controlled Programmable Gain Amplifiers in SOT-23 Features: 3-Bit Digital Gain Control in Three Gain-Code Options Rail-to-Rail Input Range Rail-to-Rail Output Swing Single or Dual Supply: 2.7V to 10.5V Total 11MHz Gain Bandwidth Product Input Noise Down to 8nV/√Hz System Dynamic Range to 120dB Input Offset Voltage: 1.5mV 8-Pin Low Profile (1mm) SOT-23 (ThinSOT™) Package

SmartMesh IP Wireless 802.15.4e System-on-Chip Features: 72-pin 10mm × 10mm QFN package 2.4 GHz, IEEE 802.15.4e System-on-Chip, Complete with Embedded SmartMesh Networking Software >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Serves as either a Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network These products contain encryption. Import/export restrictions may apply.

Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver Features: Fully Differential Input and Output Wide Supply Range: 2.375V to 12.6V Rail-to-Rail Output Swing Low Noise: 3nV/√Hz Low Distortion, 2VP-P, 1MHz: –94dBc Adjustable Output Common Mode Voltage Unity Gain Stable Gain-Bandwidth: 70MHz Slew Rate: 65V/μs Large Output Current: 85mA DC Voltage Offset <2mV MAX Open-Loop Gain: 100V/mV Low Power Shutdown 8-Pin MSOP or 3mm × 3mm DFN Package

GaAs MMIC SP4T Non-Reflective Switch, DC - 3.5 GHz Features: RoHS Compliant Product Low Insertion Loss (2 GHz): 0.7 dB Single Positive Supply: VDD = +5V Integrated 2:4 TTL Decoder 16 Lead QSOP Package

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Single Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 3 mm × 3 mm LFCSP Qualified for automotive applications

40W SPDT Failsafe Switch SMT, 0.1 - 2.1 GHz Features: High Input P0.1dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/ +3V to 0/ +8V Failsafe Operation; Tx 'On' when Unpowered 2 × 2mm DFN SMT Package

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Small, Low Power, 3-Axis 2 g Accelerometer Features:3-axis sensingSmall, low profile package4 mm 4 mm 1.45 mm LFCSPLow power: 350 A typicalSingle-supply operation: 1.8 V to 3.6 V10,000 g shock survivalExcellent temperature stabilityBandwidth adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant