4-Channel, 4.8 kHz, Ultralow Noise, 24-Bit Sigma-Delta ADC with PGA Features: Fast settling filter option 4 differential/8 pseudo differential input channels RMS noise: 11 nV @ 4.7 Hz (gain = 128) 15.5 noise-free bits @ 2.4 kHz (gain = 128) Up to 22 noise-free bits (gain = 1) Offset drift: ±5 nV/°C Gain drift: ±1 ppm/°C Specified drift over time Automatic channel sequencer Programmable gain (1 to 128) Output data rate: 4.7 Hz to 4.8 kHz Internal or external clock Simultaneous 50 Hz/60 Hz rejection 4 general-purpose digital outputs Power supply AVDD: 3 V to 5.25 V DVDD: 2.7 V to 5.25 V Current: 4.65 mA Temperature range: −40°C to +105°C 28-lead TSSOP and 32-lead LFCSP packages Interface 3-wire serial SPI, QSPI™, MICROWIRE™, and DSP compatible Schmitt trigger on SCLK

Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp Features: True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 36 V Dual-supply capability from ±2.5 V to ±18 V  Excellent load drive Capacitive load drive up to 350 pF Minimum output current of 15 mA  Excellent ac performance for low power 800 μA maximum quiescent current Unity-gain bandwidth: 1.8 MHz Slew rate of 3 V/μs  Excellent dc performance 800 μV maximum input offset voltage 2 μV/°C typical offset voltage drift 25 pA maximum input bias current  Low noise: 13 nV/√Hz @ 10 kHz 

SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin Features: Temperature range: −40°C to +85°C Accuracy of ±2°C SMBus™/I2C® Compatible Serial Interface 3 μA power-down current Temperature Conversion Time - 29 µs typ Space Saving 6-pin SOT-23 Pin-Selectable Addressing via AS Over Temperature Indicator SMBus alert function 4 versions allow 8 I2C addresses

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Ultralow Quiescent Current, 150 mA, CMOS Linear Regulators Features: Ultralow quiescent current IQ = 560 nA with 0 μA load IQ = 860 nA with 1 μA load Stable with 1 μF ceramic input and output capacitors Maximum output current: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: <50 nA typical Low dropout voltage: 195 mV @ 150 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 15 fixed output voltage options: 1.2 V to 4.2 V Adjustable output available PSRR performance of 72 dB @ 100 Hz See data sheet for additional features

Precision, Low Cost, High Speed, BiFET Dual Op Amp Features: Enhanced replacement for LF412 and TL082 AC performance Settles to ±0.01% in 1.0 μs 16 V/μs minimum slew rate (AD712J) 3 MHz minimum unity-gain bandwidth (AD712J) DC performance 200 V/mV minimum open-loop gain (AD712K) Surface mount available in tape and reel in accordance with the EIA-481A standard MIL-STD-883B parts available Single version available: AD711 Quad version: AD713 Available in PDIP, SOIC_N, and CERDIP packages AD712-EP supports defense and aerospace applications (AQEC standard) Download AD712-EP Data Sheet (pdf) Military temperature range  (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/11603 DSCC Drawing Number

2.5 kV Signal Isolated, 500 kbps, Half Duplex RS-485 Transceiver Features: RS-485 transceiver with electrical data isolation  Complies with ANSI TIA/EIA-485-A and ISO 8482: 1987(E) Slew rate-limited driver outputs Low power operation: 2.5 mA maximum  Suitable for 5 V or 3.3 V operations (VDD1) High common-mode transient immunity: >25 kV/μs See data sheet for additional features

15 MHz Rail-to-Rail Operational Dual Op Amp Features: Wide Bandwidth: 15 MHz Low Offset Voltage: 325 µV max Low Noise: 9.5 nV/√Hz @ 1 kHz Single-Supply Operation: +2.7 V to +12 V Rail-to-Rail Output Swing Low TCVOS: 1 µV/°C typ High Slew Rate: 13 V/µs See data sheet for additional featuresOP262-EP supports defense and aerospace applications (AQEC standard) Download OP262-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification See data sheet for additional features V62/12639 DSCC Drawing number

Complete Quad, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC Features: Complete quad, 16-bit digital-to-analog converter (DAC) Programmable output range ±10 V, ±10.2564 V, or ±10.5263 V ±1 LSB maximum INL error, ±1 LSB maximum DNL error Low noise: 60 nV/√Hz Settling time: 10 μs maximum Integrated reference buffers Output control during power-up/brownout Programmable short-circuit protection See Data Sheet for Additional InformationSupports Defense and Aerospace Applications (AQEC Standard) Download AD5764-EP Data Sheet (pdf) Extended temperature range: −55°C to +105°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/14622-01XE DSCC Drawing Number

Fully Accurate, Quad, 16-Bit, Buffered VOUT, 4.5 V to 5.5 V nanoDAC with SPI Interface Features: Low power quad 12-/14-/16-bit DAC, ±1 LSB INL Pin compatible and performance upgrade to AD5666 Individual and common voltage reference pin options Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale 3 power-down functions and per-channel power-down Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-/16-lead TSSOP Internal reference buffer and internal output amplifier