Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA

Digitally Controlled Programmable Gain Amplifiers in SOT-23 Features: 3-Bit Digital Gain Control in Three Gain-Code Options Rail-to-Rail Input Range Rail-to-Rail Output Swing Single or Dual Supply: 2.7V to 10.5V Total 11MHz Gain Bandwidth Product Input Noise Down to 8nV/√Hz System Dynamic Range to 120dB Input Offset Voltage: 1.5mV 8-Pin Low Profile (1mm) SOT-23 (ThinSOT™) Package

40VIN, 1.2A Silent Switcher Module Regulator Features: Low Noise Silent Switcher® Architecture CISPR 22 Class B Compliance Wide Input Voltage Range: 3.2V to 40V Wide Output Voltage Range: 0.8V to 12V 1.2A Continuous Output Current at 24VIN, 5VOUT, TA = 85°C 1.75A Peak Output Current at 3.3VOUT Selectable Switching Frequency: 200kHz to 2.2MHz External Synchronization Configurable as an Inverter 4mm × 4mm × 1.82mm BGA Package

Five-Channel, Current Output DAC with Internal Reference and SPI Features: Per channel programmable output current ranges: 300 mA, 200 mA, 100 mA, 50 mA, 25 mA, 12.5 mA, 6.25 mA, and 3.125 mA  Flexible 2.1 V to VCC output supply voltages  Flexible single- or dual-supply operation 0.6 V maximum dropout voltage guaranteed Separate voltage supply per output channel Internal switches to optional negative supply Full 12-bit and 16-bit resolution at all ranges Guaranteed operation −40°C to 125°C (H-grade) Precision internal reference (10 ppm/°C maximum VREF temperature coefficient) or external reference Analog multiplexer monitors voltages and currents A/B toggle via SPI or dedicated pin 1.71 V to VCC digital input and output supply voltage 32-lead lead frame chip scale package (LFCSP)

High Voltage High Current Hot Swap Controller Features: Allows Safe Board Insertion into Live Backplane Wide Operating Voltage Range: 6.5V to 80V Drives Two Gates for High Power Applications Configurable Parallel, Staged Start or Single MOSFET Modes Adjustable Precision Current Limit: 6mV to 20mV Current Foldback Limits MOSFET Power SOA Timer Optimizes MOSFET Capability Monitors VGS and VDS for MOSFET Health 12V Gate Drive for Lower MOSFET RDS(ON) Parallelable Controllers for Very High Current Levels Available in 24-Lead Narrow SSOP and 24-Pin 4mm × 5mm QFN Packages

Single Channel, 16-Bit Current/Voltage Output DAC with HART Connectivity Features: 16-bit resolution and monotonicity Current or voltage output available on a single terminal Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA, 0 mA to 24 mA, ±20 mA, ±24 mA, and −1 mA to +22 mA Voltage output ranges (with 20% overrange): 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V User programmable offset and gain Advanced on-chip diagnostics, including a 12-bit ADC On-chip reference −40°C to +115°C temperature range 32-Lead, 5 mm × 5 mm LFCSP package

16-Channel, 12-/16-Bit nanoDAC+ with 2 ppm/C Voltage Reference TC, I2C Interface Features: High relative accuracy (INL): ±4 LSB maximum at 16 bits (AD5677R only) TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference TC: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

High Precision, Impedance & Electrochemical Front End Features: Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual output voltage DAC with an output range of 0.2 V to 2.4 V 12-bit VBIAS0 output to bias potentiostat 6-bit VZERO0 output to bias TIA Ultra low power: 1 µA 1 high speed, 12-bit DAC Output range to sensor: ±607 mV Programmable gain amplifier on output with gain settings of 2 and 0.05 Amplifiers, accelerators, and references 1 low power, low noise potentiostat amplifier suitable for potentiostat bias in electrochemical sensing 1 low noise, low power TIA, suitable for measuring sensor current output 50 pA to 3 mA range Programmable load and gain resistors for sensor output Analog hardware accelerators Digital waveform generator Receive filters Complex impedance measurement (DFT) engine 1 high speed TIA to handle wide bandwidth input signals from 0.015 Hz up to 200 kHz Digital waveform generator for generation of sinusoid and trapezoid waveforms 2.5 V and 1.82 V internal reference voltage sources System level power savings Fast power-up and power-down analog blocks for duty cycling Programmable AFE sequencer to minimize workload of host controller 6 kB SRAM to preprogram AFE sequences Ultra low power potentiostat channel: 6.5 µAof current consumption when powered on and all other blocks in hibernate mode Smart sensor synchronization and data collection Cycle accurate control of sensor measurement Sequencer controlled GPIOs On-chip peripherals SPI serial input/output Wake-up timer Interrupt controller Power 2.8 V to 3.6 V supply 1.82 V input/output compliant Power-on reset Hibernate mode with low power DAC and potentiostat amplifier powered up to maintain sensor bias Package and temperature range 3.6 mm × 4.2 mm, 56-ball WLCSP 7 mm × 7 mm, 48-lead LFCSP Fully specified for operating temperature range of −40°C to +85°C AD5940 and AD5941 fully specified for operating temperature range of −40°C to +85°C AD5941W fully specified for operating temperature range of −40°C to +105°C AEC-Q100 qualified for automotive applications

High Precision, Impedance & Electrochemical Front End Features: Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual output voltage DAC with an output range of 0.2 V to 2.4 V 12-bit VBIAS0 output to bias potentiostat 6-bit VZERO0 output to bias TIA Ultra low power: 1 µA 1 high speed, 12-bit DAC Output range to sensor: ±607 mV Programmable gain amplifier on output with gain settings of 2 and 0.05 Amplifiers, accelerators, and references 1 low power, low noise potentiostat amplifier suitable for potentiostat bias in electrochemical sensing 1 low noise, low power TIA, suitable for measuring sensor current output 50 pA to 3 mA range Programmable load and gain resistors for sensor output Analog hardware accelerators Digital waveform generator Receive filters Complex impedance measurement (DFT) engine 1 high speed TIA to handle wide bandwidth input signals from 0.015 Hz up to 200 kHz Digital waveform generator for generation of sinusoid and trapezoid waveforms 2.5 V and 1.82 V internal reference voltage sources System level power savings Fast power-up and power-down analog blocks for duty cycling Programmable AFE sequencer to minimize workload of host controller 6 kB SRAM to preprogram AFE sequences Ultra low power potentiostat channel: 6.5 µAof current consumption when powered on and all other blocks in hibernate mode Smart sensor synchronization and data collection Cycle accurate control of sensor measurement Sequencer controlled GPIOs On-chip peripherals SPI serial input/output Wake-up timer Interrupt controller Power 2.8 V to 3.6 V supply 1.82 V input/output compliant Power-on reset Hibernate mode with low power DAC and potentiostat amplifier powered up to maintain sensor bias Package and temperature range 3.6 mm × 4.2 mm, 56-ball WLCSP 7 mm × 7 mm, 48-lead LFCSP Fully specified for operating temperature range of −40°C to +85°C AD5940 and AD5941 fully specified for operating temperature range of −40°C to +85°C AD5941W fully specified for operating temperature range of −40°C to +105°C AEC-Q100 qualified for automotive applications

4-Channel, I2C, Ultralow Power 12-Bit ADC in 20-Lead LFCSP/TSSOP Features: I2C-compatible serial interface supports standard and fast modes Ultralow power: 90 μW typical at 3 V in fast mode Specified for VDD of 2.7 V to 5.25 V On-chip accurate 2.5 V reference, 5 ppm/°C typical drift 4 single-ended analog input channels ALERT function BUSY function Autocycle mode Wide input bandwidth 68 dB signal-to-noise ratio (SNR) typical at input frequency of 1 kHz Flexible power/throughput rate management No pipeline delays Power-down mode 550 nA typical at VDD = 5.25 V 435 nA typical at VDD = 3 V 20-lead LFCSP and TSSOP packages Temperature range: −40°C to +125°C