Robust, Industrial, Low Power 10BASE-T1L Ethernet MAC-PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Integrated MAC with SPI interface SPI supporting 10 Mbps full duplex Supports OPEN Alliance 10BASE-T1x MAC-PHY serial interface Low power consumption: dual supply 42 mW typical Supports 1.0 V p-p and 2.4 V p-p transmit levels Autonegotiation capability Supports intrinsic safety applications External termination resistors Separate receive and transmit pins MDIO memory map accessible via SPI On Chip FIFOs: 20kB receive, 8kB transmit (configurable) Cut-through or Store and forward operation Rx high and low priority queues IEEE 1588 timestamp support Statistics counters 16 MAC addresses supported for frame filtering Link LED Unmanaged configuration using pin strapping including: Master/Slave selection Transmit amplitude 25 MHz crystal oscillator/25 MHz external clock input Single supply 1.8 V/3.3 V operation (mode dependent) Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p EMC test standards IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-6 conducted immunity (10V/m) IEC 61000-4-5 surge (±4kV) IEC 61000-4-3 radiated immunity (Class A) EN55032 radiated emissions (Class B) Small package 40-lead (6 mm × 6 mm) LFCSP Wide temperature range -40°C to 105°C

Low Complexity, 2-Port Ethernet Switch with Integrated 10BASE-T1L PHYs Features: 10BASE-T1L IEEE® Std 802.3cg-2019™ compliant Supports 1.0 V p-p & 2.4 V p-p transmit Levels Cable reach Up to 1700 meters with 1.0 V p-p transmit level Up to 1700 meters with 2.4 V p-p transmit level Low power consumption Low power consumption - single supply 80 mW typ Dual supply 1.0 V p-p: 77 mW typical Integrated switch with SPI interface 10 Mbps full duplex 16 MAC addresses supported for frame forwarding Supports OPEN Alliance 10BASE-T1x MACPHY SPI MDIO memory map accessible via SPI Supports high & low priority queues Total buffer memory of 28 kB shared between ports and host Autonegotiation capability Managed or unmanaged configuration Cut through or store and forward operation IEEE 1588 time stamp capture on transmit and receive Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Port dedicated statistics counters Link and cable diagnostics 25 MHz crystal or external clock input Single or dual supply with 1.8 V or 3.3 V operation Integrated power supply monitoring and POR Small package: 48-lead, 7 mm × 7 mm LFCSP Temperature range Industrial: 40°C to +85°C Extended: 40°C to +105°C

Precision MEMS IMU Module Features: Triaxial, digital gyroscope  ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16465-1)  0.15°/√hr angular random walk (ADIS16465-1 and ADIS16465-2)  ±0.05° axis to axis misalignment error  Triaxial, digital accelerometer, ±8 g 3.6 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C   SPI-compatible data communications Programmable operation and control  Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C

Precision, Miniature MEMS IMU Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2.3°/hr in-run bias stability (ADIS16507-1) 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1) ±0.25° axis to axis misalignment error Triaxial, digital accelerometer, ±392 m/sec2 dynamic range 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ Triaxial, delta angle and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, scaled, and output On demand self-test of inertial sensors On demand self-test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 19,600 m/sec2 mechanical shock survivability Operating temperature range: −40°C to +105°C

Precision, Miniature MEMS IMU

Features:

• Triaxial, digital gyroscop
  • ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models
  • 2.3°/hr in-run bias stability (ADIS16507-1)
  • 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1)
  • ±0.25° axis to axis misalignment error
• Triaxial, digital accelerometer, ±392 m/sec2 dynamic range
  • 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ
• Triaxial, delta angle and delta velocity outputs
• Factory calibrated sensitivity, bias, and axial alignment
  • Calibration temperature range: −40°C to +85°C
• SPI compatible data communications
• Programmable operation and control
  • Automatic and manual bias correction controls
  • Data ready indicator for synchronous data acquisition
  • External sync modes: direct, scaled, and output
  • On demand self-test of inertial sensors
  • On demand self-test of flash memory
• Single-supply operation (VDD): 3.0 V to 3.6 V
• 19,600 m/sec2 mechanical shock survivability
• Operating temperature range: −40°C to +105°C

Applications:

• Navigation, stabilization, and instrumentation
• Unmanned and autonomous vehicles
• Smart agriculture and construction machinery
• Factory/industrial automation, robotics
• Virtual/augmented reality
• Internet of Moving Things

Quad, Low Power, 12-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator Features: Highly integrated quad DAC On-chip 4096 × 12-bit pattern memory On-chip DDS Power dissipation at 3.3 V, 4 mA output typical 315.25 mW at 180 MSPS Power-down mode: <5 mW at 3.3 V Supply voltage: 1.8 V to 3.3 V SFDR to Nyquist: 86 dBc at 10 MHz output Phase noise at 1 kHz offset, 180 MSPS, 4 mA: −140 dBc/Hz Differential full-scale current outputs: 8 mA maximum at 3.3 V Small footprint, 5 mm × 5 mm with 3.5 mm × 3.6 mm exposed paddle, 32-lead LFCSP RoHS compliant package

Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver Features: Fully Differential Input and Output Wide Supply Range: 2.375V to 12.6V Rail-to-Rail Output Swing Low Noise: 3nV/√Hz Low Distortion, 2VP-P, 1MHz: –94dBc Adjustable Output Common Mode Voltage Unity Gain Stable Gain-Bandwidth: 70MHz Slew Rate: 65V/μs Large Output Current: 85mA DC Voltage Offset <2mV MAX Open-Loop Gain: 100V/mV Low Power Shutdown 8-Pin MSOP or 3mm × 3mm DFN Package

GaAs MMIC SP4T Non-Reflective Switch, DC - 3.5 GHz Features: RoHS Compliant Product Low Insertion Loss (2 GHz): 0.7 dB Single Positive Supply: VDD = +5V Integrated 2:4 TTL Decoder 16 Lead QSOP Package

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA