FREQ SYNTHESIZER 0.5-13.5GHZ LFCSP-24; Synthesizer Type:Frequency; Frequency:13.5GHz; Supply Voltage Min:2.7V; Supply Voltage Max:3.45V; Digital IC Case:LFCSP; No. of Pins:24; Operating Temperature Min:-40 C; Packaging:Each ;RoHS Compliant: Yes

8-Channel JFET Analog Multiplexers (Overvoltage & Power Supply Loss Protected) Features: JFET Switches Rather than CMOS Low 'ON' Resistance: 220Ω Highly Resistant to Static Discharge Damage NO SCR Latch-Up Problems 125°C Temperature Tested Dice Available MUX-08 Pin Compatible with DG508, HI-508A, IH5108, IH6108, LF11508, 12508, 13508, AD7506 See datasheet for additional features

Digital Potentiometer ICs 128tap, Quad DigiPOT, NVM, SPI

High Speed Operational Amplifiers VLTG-FDBK,G = 1 CLAMP AMP

Digital to Analog Converters - DAC 14-Bit, 125 MSPS+ TxDAC DAC

RS-232 Interface IC RS-232 CIRCUIT

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

Operational Amplifiers - Op Amps VLTG-FDBK, G= 2 CLAMP AMP

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

20 V, 500 mA, Low Noise LDO Regulator with Soft Start Features: Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 μV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −2% to +1%, TJ = −40°C to +125°C −1.25% to +1%, TJ = 0°C to +85°C Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 μA at VIN = 12 V, stable with small 1 μF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.22 V to 19 V Programmable soft start for inrush current control Foldback current-limit and thermal overload protection User programmable precision UVLO/enable Power-good indicator 8-lead LFCSP and 8-lead SOIC packages