Current Sense Amplifier, Reference and Comparator with POR Features: Current Sense Amplifier Fast Step Response: 500ns Low Offset Voltage: 200μV Maximum Low Gain Error: 0.2% Maximum Internal 400mV Precision Reference Internal Comparator Power-On Reset Capability Fast Response Time: 500ns Total Threshold Error: ±1.25% Maximum Wide Supply Range: 2.7V to 60V Supply Current: 450μA Specified for –40°C to 125°C Temperature Range Available in 8-Lead MSOP and 8-Lead (2mm × 3mm) DFN Packages

Dual Ultrathin 2.5A or Single 5A Step-Down DC/DC Module Regulator Features: Complete Solution in <1cm2 Wide Input Voltage Range:3.6V to 20V 3.3V Input Compatible with VIN Tied to INTVCC 0.6V to 5.5V Output Voltage Dual 2.5A (3A Peak) or Single 5A Output Current ±1.5% Maximum Total Output Voltage Regulation Error Over Load, Line and Temperature Current Mode Control, Fast Transient Response External Frequency Synchronization Multiphase Parallelable with Current Sharing Output Voltage Tracking and Soft-Start Capability Selectable Burst Mode® Operation Overvoltage Input and Overtemperature Protection Power Good Indicators 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA Packages

40W SPDT Failsafe Switch SMT, 0.1 - 2.1 GHz Features: High Input P0.1dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/ +3V to 0/ +8V Failsafe Operation; Tx 'On' when Unpowered 2 × 2mm DFN SMT Package

Programmable Transimpedance, Current to Bits Receiver Module Features: High performance, current input, data acquisition μModule that includes a TIA, analog filter, ADC driver, and ADC 3 selectable TZ settings: 2 k, 20 k, and 200 k Internal 1.8 V LDO for the ADC All passive components including supply decoupling Small form factor: 12.00 mm × 6.00 mm CSP_BGA Operation from a single 3.3 V supply Full-scale input current to 800 μA (TZ = 2 k) Fast input overload recovery High analog input current to 40 mAAnalog filter for noise reduction and antialias filtering Selectable 1.0 MHz and 100 MHz LPF bandwidth Low input referred current noise: 16 pA rms TZ = 200 k, 65,536 averages, 1 MHz analog filter Supports input pulse widths down to 10 ns 14-bit ADC with sample rate up to 125 MSPS Serial LVDS data output SPI control interface Quiescent power: 546 mW, LDO enabled Temperature range: 40C to +85C

SigmaDSP Digital Audio Processor Features: Qualified for automotive applications Fully programmable audio DSP for enhanced sound processing Features SigmaStudio, a proprietary graphical programming tool for the development of custom signal flows Clock oscillator for generating master clock from crystal Up to 294.912 MHz, 32-bit SigmaDSP core at 1.2 V Up to 6144 SIMD instructions per sample at 48 kHz Up to 40 kWords of parameter/data RAM Up to 800 ms digital audio delay pool at 48 kHz Audio input/output and routing 4 serial input ports, 4 serial output ports 48-channel, 32-bit digital input/output up to a sample rate of 192 kHz Flexible configuration for TDM, I2S, left and right justified formats, and PCM Up to 8 stereo ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR Stereo S/PDIF input and output Four PDM microphone input channels Multichannel, byte addressable, TDM serial ports Integer PLL and flexible clock generators Integrated die temperature sensor

4 ADC, 2 DAC Low-Power Codec with Audio Processor Features: Programmable audio processing engine 192 kHz processing path Biquad filters, limiters, volume controls, mixing Low latency, 24-bit ADCs and DACs 102 dB SNR (signal through PGA and ADC with A-weighted filter) 107 dB combined SNR (signal through DAC and headphone with A-weighted filter) Serial port sample rates from 8 kHz to 192 kHz 38 μs analog-to-analog latency Four single-ended analog inputs—configurable as microphone or line inputs Stereo analog audio output—single-ended or differential, configurable as either line output or headphone driver PLL supporting any input clock rate from 8 MHz to 27 MHz Full-duplex, asynchronous sample rate converters (ASRCs) See data sheet for additional features

Four-ADC, Two-DAC, Low Power Codec with Audio Processor Features: Programmable audio processing engine Fast (up to 768 kHz) and slow processing paths Biquad filters, limiters, volume controls, and mixing Low latency, 24-bit ADCs and DACs 102 dB SNR (through PGA and ADC with A weighted filter) 108 dB combined SNR (through DAC and headphone with A weighted filter) Serial port sampling rate from 8 kHz to 192 kHz 5 μs analog-to-analog latency 4 single-ended analog inputs, configurable as microphone or line inputs Dual stereo digital microphone inputs Stereo analog audio output, single-ended or differential, configurable as either line output or headphone driver PLL supporting any input clock rate from 8 MHz to 27 MHz Full duplex, asynchronous sample rate converters (ASRCs) Power supplies Analog and digital input/output of 1.8 V to 3.3 V Digital signal processing (DSP) core of 1.1 V to 1.8 V Low power I2C and SPI control interfaces, self boot from I2C EEPROM 7 multipurpose (MPx) pins for digital controls and outputs

Three ADCs, One DAC, Low Power Codec with Audio/FastDSP Features: Programmable FastDSP audio processing engine Up to 768 kHz sample rate Biquad filters, limiters, volume controls, mixing Low latency, 24-bit ADCs and DAC 106 dB SNR (signal through ADC with A-weighted filter) 110 dB combined SNR (signal through DAC and headphone with A-weighted filter) Serial port sample rates from 8 kHz to 768 kHz 5 μs analog-to-analog group delay Programmable, double precision MAC engine for 13-stage equalizer 3 analog inputs (2 differential and 1 single-ended), configurable as microphone or line inputs Analog differential audio output, configurable as either line output or headphone driver PLL supporting any input clock rate from 30 kHz to 27 MHz 1-channel ASRCI, 3-channel ASRCO Serial audio ports supporting I2S, left justified, or up to 16-channel TDM (TDM16) 2 interpolators and 4 decimators with flexible routing Power supplies Analog AVDD at 1.8 V Digital I/O IOVDD at 1.8 V to 3.3 V Headphone HPVDD at 1.8 V Headphone HPVDD_L at 1.2 V to1.8 V Control/communication interfaces I2C, SPI, or UART 28-ball, 0.4 mm pitch, 2.957 mm × 1.757 mm WLCSP

Ultrafast 3.3 V Single-Supply Comparator w/CML Output Drivers Features: 3.3 V/5.2 V single-supply operation 150 ps propagation delay 15 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 80 ps minimum pulse width 35 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) On-chip terminations at both input pins Robust inputs with no output phase reversal Resistor-programmable hysteresis Differential latch control Extended industrial −40°C to +125°C temperature range

High Performance Narrowband ISM Transceiver IC Features: Low power, high performance, narrowband transciever Frequency Bands: 80-650MHz and 862-940MHz Modulation schemes: 2FSK, 3FSK, 4FSK Spectral shaping: Gaussian and Raised Cosine Filtering Automatic PA ramp Data rates supported: 0.05kps to 25kbps Programmable output power: –16dBm to +13dBm Low IF architecture with programmable IF bandwidths of 12.5/18.5/25kHz 2.3V to 3.6V Power Supply Receiver sensitivity: –123dBm @ 1kbps FSK Fully automatic frequency control loop (AFC) compensates for lower tolerance crystals High Accuracy digital RSSI and integrated Tx/Rx switch