Precision, Miniature MEMS IMU

Features:

• Triaxial, digital gyroscop
  • ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models
  • 2.3°/hr in-run bias stability (ADIS16507-1)
  • 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1)
  • ±0.25° axis to axis misalignment error
• Triaxial, digital accelerometer, ±392 m/sec2 dynamic range
  • 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ
• Triaxial, delta angle and delta velocity outputs
• Factory calibrated sensitivity, bias, and axial alignment
  • Calibration temperature range: −40°C to +85°C
• SPI compatible data communications
• Programmable operation and control
  • Automatic and manual bias correction controls
  • Data ready indicator for synchronous data acquisition
  • External sync modes: direct, scaled, and output
  • On demand self-test of inertial sensors
  • On demand self-test of flash memory
• Single-supply operation (VDD): 3.0 V to 3.6 V
• 19,600 m/sec2 mechanical shock survivability
• Operating temperature range: −40°C to +105°C

Applications:

• Navigation, stabilization, and instrumentation
• Unmanned and autonomous vehicles
• Smart agriculture and construction machinery
• Factory/industrial automation, robotics
• Virtual/augmented reality
• Internet of Moving Things

GaAs, pHEMT, Low Noise Amplifier, 20 GHz to 54 GHz Features: Gain: 21.5 dB typical at 30 GHz to 44 GHz Input return loss: 22 dB typical at 30 GHz to 44 GHz Output return loss: 23 dB typical at 30 GHz to 44 GHz OP1dB: 14 dB typical at 30 GHz to 44 GHz PSAT: 18 dBm typical at 30 GHz to 44 GHz OIP3: 21.5 dBm typical at 30 GHz to 44 GHz Noise figure: 3.0 dB typical at 30 GHz to 44 GHz 3 V supply voltage at 120 mA 50 Ω matched input and output Die size: 2.3 mm x 1.45 mm x 0.1 mm

GaAs, pHEMT, MMIC, Low Noise Amplifier, 0.025 GHz to 12 GHz Features:Low noise figure: 2.5 dB typical at 0.025 GHz to 10 GHzSingle positive supply (self biased)High gain: 16.5 dB typical at 0.025 GHz to 10 GHzHigh OIP3: 36 dBm typical at 0.025 GHz to 10 GHzRoHS-compliant, 2 mm 2 mm, 6-lead LFCSP

2 GHz to 28 GHz, GaAs, pHEMT, MMIC Low Noise Amplifier Features: P1dB: 20 dBm typical at 2 GHz to 6 GHz PSAT: 20.5 dBm typical at 2 GHz to 6 GHz Gain: 15.5 dB typical at 6 GHz to 28 GHz Noise figure: 2.5 dB typical at 2 GHz to 20 GHz OIP3: 26 dBm typical at 2 GHz to 6 GHz Supply voltage: 5 V at 53 mA 50 Ω matched input and output ADL9006CHIPS P1dB: 19 dBm typical at 2 GHz to 14 GHz Gain: 15.5 dB typical at 14 GHz to 22 GHz Noise figure: 2.2 dB at 2 GHz to 14 GHz Output IP3: 24 dBm typical at 2 GHz to 14 GHz Power supply voltage: 5 V with a 55 mA total supply current 50 Ω matched input and output

Low Power, +5V CMOS RS-232 100kBPS Transceiver with 2 Drivers/Receivers Features: Single 5 V Power Supply  Meets All EIA-232-E and V.28 Specifications  120 kB/s Data Rate  On-Board DC-DC Converters  ±9 V Output Swing with 5 V Supply  Small 1 µF Capacitors  Low Power Shutdown ≤ µA  Receivers Active in Shutdown (ADM223)  ±30 V Receiver Input Levels  Latch-Up FREE  Plug-In Upgrade for MAX223/230-241  Plug-In Upgrade for AD230–AD241 

5.7 kV rms, Signal Isolated, Basic CAN FD Transceiver Features: 5.7 kV rms signal isolated CAN FD transceiver 1.7 V to 5.5 V supply and logic side levels 4.5 V to 5.5 V supply on bus side ISO 11898-2:2016-compliant CAN FD Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection (CANH, CANL): ±40 V Passes EN 55022, Class B by 6 dB Safety and regulatory approvals VDE certificate of conformity, VDE V 0884-10 (pending) UL: 5700 V rms for 1-minute duration per UL 1577 (pending) CSA component acceptance 5A at 5.7 kV rms IEC 60950, IEC 61010 (pending) High common-mode transient immunity: >75 kV/µs Industrial operating temperature range: −40°C to +125°CADM3050E-EP Supports defense and aerospace applications (AQEC standard) Download ADM3050E-EP Data Sheet (PDF) Full military temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/19605 DSCC Drawing Number

5.7 kV rms, Signal Isolated, Basic CAN FD Transceiver Features: 5.7 kV rms signal isolated CAN FD transceiver 1.7 V to 5.5 V supply and logic side levels 4.5 V to 5.5 V supply on bus side ISO 11898-2:2016-compliant CAN FD Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection (CANH, CANL): ±40 V Passes EN 55022, Class B by 6 dB Safety and regulatory approvals VDE certificate of conformity, VDE V 0884-10 (pending) UL: 5700 V rms for 1-minute duration per UL 1577 (pending) CSA component acceptance 5A at 5.7 kV rms IEC 60950, IEC 61010 (pending) High common-mode transient immunity: >75 kV/µs Industrial operating temperature range: −40°C to +125°CADM3050E-EP Supports defense and aerospace applications (AQEC standard) Download ADM3050E-EP Data Sheet (PDF) Full military temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/19605 DSCC Drawing Number

5.7 kV rms, 849 VPEAK Working Voltage, Signal Isolated CAN-FD Transceiver Features: 5.7 kV rms (8000 VPEAK) signal isolated CAN transceiver 1.7 V to 5.5 V supply range for VDD1 4.5 V to 5.5 V supply range for VDD2 ISO 11898-2: 2016 compliant (CAN flexible data rate, CAN-FD) Data rates up to 12 Mbps for CAN-FD Low loop propagation delay of 145 ns max Extended common-mode range of ±25 V Bus fault protection (CANH, CANL) of ±40 V Low power standby supporting remote wake request Extra isolated signal for control (for example, termination switches) Slope control for reduced EMI Safety and regulatory approvals (pending) VDE Certificate of Conformity, VDE 0884-11 VIORM = 849 VPEAK VIOSM = 8000 VPEAK (Test: VPEAK = 12.8 kV) UL: 5700 V rms for 1 minute per UL1577 CSA Component Acceptance 5A at 5 kV rms IEC 60950, IEC 61010 8.3 mm creepage/clearance with 16-lead SOIC package High common-mode transient immunity: ≥75 kV/µs Industrial temperature range: −40°C to +125°C

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Full Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC