Ultra-Low-Noise, High-Accuracy 5.0V Voltage Reference Features: Maximum temperature coefficient (TCVOUT): 0.8 ppm/°C (D grade 0°C to 70°C) 1 ppm/°C (C grade 0°C to 70°C) 2 ppm/°C (B grade −40°C to +125°C) 4 ppm/°C (A grade 40°C to +125°C) Output noise (0.1 Hz to 10 Hz): 1 μV p-p at VOUT of 2.048 V typical Initial output voltage error: B, C, D grade: ±0.02% (maximum) Input voltage range: 3 V to 15 V Operating temperature: A grade and B grade: −40°C to +125°C C grade: 0°C to +70°C Output current: +10 mA source/−10 mA sink Low quiescent current: 950 μA (maximum) Low dropout voltage: 300 mV at 2 mA (VOUT ≥ 3 V) 8-lead SOIC package and LCC package AEC-Q100 qualified for automotive applications Long-term drift: 8 ppm typical at 4500 hours

Silicon SPDT Switch, Reflective, 9 kHz to 44 GHz Features: Ultrawideband frequency range: 9 kHz to 44 GHz Reflective design Low insertion loss with impedance match 0.9 dB typical to 18 GHz 1.4 dB typical to 40 GHz 1.6 dB typical to 44 GHz Low insertion loss without impedance match 0.9 dB typical to 18 GHz 1.7 dB typical to 40 GHz 2.2 dB typical to 44 GHz High input linearity P1dB: 27.5 dBm typical IP3: 50 dBm typical High RF input power handling Through path: 27 dBm Hot switching: 27 dBm No low frequency spurious RF settling time (50% VCTL to 0.1 dB final RF output): 3.4 μs 12-terminal, 2.25 mm × 2.25 mm LGA package Pin compatible with the ADRF5024 fast switching version

Silicon SPDT Switch, Reflective, 9 kHz to 44 GHz Features: Ultrawideband frequency range: 9 kHz to 44 GHz Reflective design Low insertion loss with impedance match 0.9 dB typical to 18 GHz 1.4 dB typical to 40 GHz 1.6 dB typical to 44 GHz Low insertion loss without impedance match 0.9 dB typical to 18 GHz 1.7 dB typical to 40 GHz 2.2 dB typical to 44 GHz High input linearity P1dB: 27.5 dBm typical IP3: 50 dBm typical High RF input power handling Through path: 27 dBm Hot switching: 27 dBm No low frequency spurious RF settling time (50% VCTL to 0.1 dB final RF output): 3.4 μs 12-terminal, 2.25 mm × 2.25 mm LGA package Pin compatible with the ADRF5024 fast switching version

Silicon SPDT Switch, Nonreflective, 100 MHz to 44 GHz Features: Ultrawideband frequency range: 100 MHz to 44 GHz Nonreflective design Low insertion loss: 1.2 dB to 18 GHz 1.7 dB to 26 GHz 2.4 dB to 40 GHz 3.8 dB to 44 GHz High isolation 55 dB to 18 GHz 53 dB to 26 GHz 50 dB to 40 GHz 45 dB to 44 GHz High input linearity P1dB: 27 dBm typical IP3: 53 dBm typical High power handling 24 dBm insertion loss path 24 dBm isolation path All off state control No low frequency spurious signals 0.1 dB RF settling time: 40 ns typical 20-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5027, low frequency cutoff versionADRF5026-EP supports defense and aerospace applications (AQEC standard) Download ADRF5026-EP data sheet (pdf) Supports defense and aerospace applications (AQEC standard) Military temperature range (−55°C to +105°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/21601 DSCC Drawing Number

Silicon SPDT Switch, Reflective, 35 GHz to 44 GHz Features:Reflective design Low insertion loss: 1.8 dB at 44 GHz High isolation: 28 dB at 44 GHz High input linearity 0.1 dB power compression (P0.1dB): 37 dBm Third-order intercept (IP3): 52 dBm High RF power handling: 28 dBm average 36 dBm peak Single supply operation: 3.3V Internal negative voltage generator (NVG) RF settling time (0.1 dB final RF output): 45 ns 20-terminal, 3 mm × 3 mm, land grid array package Pin compatible with the ADRF5300: 24 GHz - 32 GHz

Ultralow Power Energy Harvester PMU with MPPT and Charge Management Features: Boost regulator with maximum power point tracking (MPPT) with dynamic sensing or no sensing mode Hysteresis mode for best ultralight load efficiency Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA Input voltage operating range: 0.08 V to 3.3 V Fast cold start from 380 mV (typical) with charge pump Programmable shutdown point on MINOP pin based on the input open circuit voltage (OCV) 150 mA regulated output from 1.5 V to 3.6 V Battery terminal charging threshold (2.2 V to 5.2 V) to support charging storage elements Optional BACK_UP power path management Radio frequency (RF) transmission conducive to shutting down the switcher temporarily via microcontroller unit (MCU) communication

50 mA/500 mA, High Efficiency, Ultralow Power Step-Down Regulator Features: Input start-up voltage range: 2.15 V to 6.50 V Operates down to 2.00 V voltage Ultralow 180 nA quiescent current with no load Selectable output voltage of 1.2 V to 3.6V or 0.8V to 5.0V ±1.5% output accuracy over full temperature range in PWM mode Selectable hysteresis mode or PWM operation mode Output current Up to 50 mA in hysteresis mode Up to 500 mA in PWM mode VOUTOK flag monitors the output voltage 100% duty cycle operation mode 2 MHz switching frequency with optional synchronization input from 1.5 MHz to 2.5 MHz QOD option UVLO, OCP, and TSD protection 9-ball, 1.65 mm × 1.87 mm WLCSP −40°C to +125°C junction temperature

50 mA/500 mA, High Efficiency, Ultralow Power Step-Down Regulator Features: Input start-up voltage range: 2.15 V to 6.50 V Operates down to 2.00 V voltage Ultralow 180 nA quiescent current with no load Selectable output voltage of 1.2 V to 3.6V or 0.8V to 5.0V ±1.5% output accuracy over full temperature range in PWM mode Selectable hysteresis mode or PWM operation mode Output current Up to 50 mA in hysteresis mode Up to 500 mA in PWM mode VOUTOK flag monitors the output voltage 100% duty cycle operation mode 2 MHz switching frequency with optional synchronization input from 1.5 MHz to 2.5 MHz QOD option UVLO, OCP, and TSD protection 9-ball, 1.65 mm × 1.87 mm WLCSP −40°C to +125°C junction temperature

Ultralow Power Step-Down Regulator with Input Voltage Monitor and Regulation Features: Input start-up voltage range: 2.15 V to 6.50 V  Operation down to 2.00 V  Ultralow, 260 nA quiescent current with no load Selective output voltage from 1.2 V to 3.6 V (or 0.8 V to 5.0 V) ±2.5% output accuracy over the full temperature range Selectable hysteresis or pulse-width modulation (PWM) operation mode Output current up to 50 mA in hysteresis mode VINOK flag to monitor the input voltage Ultrafast stop switching control 100% duty cycle operation mode Quick output discharge (QOD) option Undervoltage lockout (UVLO), OCP, and thermal shutdown (TSD) protection 10-lead, 3 mm × 3 mm LFCSP package −40°C to +125°C operating junction temperature range

Ultralow Power Step-Down Regulator with Input Voltage Monitor and Regulation Features: Input start-up voltage range: 2.15 V to 6.50 V  Operation down to 2.00 V  Ultralow, 260 nA quiescent current with no load Selective output voltage from 1.2 V to 3.6 V (or 0.8 V to 5.0 V) ±2.5% output accuracy over the full temperature range Selectable hysteresis or pulse-width modulation (PWM) operation mode Output current up to 50 mA in hysteresis mode VINOK flag to monitor the input voltage Ultrafast stop switching control 100% duty cycle operation mode Quick output discharge (QOD) option Undervoltage lockout (UVLO), OCP, and thermal shutdown (TSD) protection 10-lead, 3 mm × 3 mm LFCSP package −40°C to +125°C operating junction temperature range