Hot Swap Voltage Controllers ON Pin + Auto-Retry IC.

10 Bit Analog to Digital Converter 2 Input 1 SAR 8-MSOP

Low-Side Gate Driver IC Non-Inverting 8-MSOP

Linear Voltage Regulators 300mA fixed anyCAP LDO

2.7 V to 5.5 V, 450 A, Rail-to-Rail Output, Quad, 16-Bit nanoDAC Features: Low power quad nanoDACs: 16 Bits Relative Accuracy: ±12 LSBs max Guaranteed monotonic by design 10-lead MSOP and 3mm × 3mm LFCSP_WD package 2.7 V to 5.5 V power supply Power-on reset to zero Per channel power-down Serial interface, up to 50MHz

250 kSPS 16-BIT PulSAR A/D Converter in SOIC Features: 16 Bits Resolution Throughput: 250 kSPS INL: ±4 LSB Max Power Dissipation: 800 µA @ 5V/100 kSPS 540 µA @ 2.7V/100 kSPS Pseudo-Differential Analog Input Range: 0 V to VREF with VREF up to VDD S/(N+D): 92 dB @ 20 kHz No Pipeline Delay Single Supply Operation 2.7 V or 5 V Serial Interface SPI®/QSPI™/µWire/DSP compatible µSOIC Package (µSO8) Improved 2nd Source of LTC1864 and LTC1864L

Low Cost, High Speed Rail-to-Rail Amplifier (Dual) Features:Low cost single (AD8091) and dual (AD8092) amplifiers Fully specified at +3 V, +5 V, and 5 V supplies Single-supply operation Output swings to within 25 mV of either rail High speed and fast settling on 5 V110 MHz, 3 dB bandwidth (G = +1)145 V/s slew rate50 ns settling time to 0.1% Good video specifications (G = +2)Gain flatness of 0.1 dB to 20 MHz; RL = 150 0.03% differential gain error; RL = 1 k0.03%differential phase error; RL = 1 kLow distortion 80 dBc total harmonic @ 1 MHz; RL = 100 Outstanding load drive capabilityDrives 45 mA, 0.5 V from supply railsDrives 50 pF capacitive load (G = +1) Low power of 4.4 mA per amplifier

Quad Voltage Monitor and Sequencer Features: Powered from 2.7 V to 5.5 V on the VCC pin Logical core with internal timeouts provides power supply sequencing and fault protection 4 inputs can be programmed to monitor different voltage levels with resistor dividers Monitors 4 supplies via 0.8% accurate comparators 3 open-drain enable outputs Open-drain power-good output (PWRGD) 10-lead MSOP

1 nV/Hz, Low Power, Rail-to-Rail Output Amplifiers Features: Low wideband noise   1 nV/√Hz   2.8 pA/√Hz Low 1/f noise   2.4 nV/√Hz @ 10 Hz Low distortion: −115 dBc @ 100 kHz, VOUT = 2 V p-p Low power: 3 mA/amp Low input offset voltage: 0.5 mV maximum High speed   230 MHz, −3 dB bandwidth       (G = +1)   120 V/μs slew rate   45 ns settling time to 0.1% Rail-to-rail output Wide supply range: 3 V to 10 V Disable feature (ADA4897-1)

The single ADA4077-1, dual ADA4077-2, and quad ADA4077-4amplifiers feature extremely low offset voltage and drift, and lowinput bias current, noise, and power consumption. Outputs are stable with capacitive loads of more than 1000 pF with no external compensation.Applications for this amplifier include sensor signal conditioning (such as thermocouples, resistance temperature detectors (RTDs),strain gages), process control front-end amplifiers, and precisiondiode power measurement in optical and wireless transmission systems. The ADA4077-1/ADA4077-2/ADA4077-4 are useful in line powered and portable instrumentation, precision filters,and voltage or current measurement and level setting.Unlike other amplifiers, the ADA4077-1/ADA4077-2/ADA4077-4 have an MSL1 rating that is compliant with the most stringent of assembly processes, and they are specified over theextended industrial temperature range from −40°C to +125°C for the most demanding operating environments.APPLICATIONS Process control front-end amplifiers  Optical network control circuits Instrumentation Precision sensors and controls Precision filters