The ADM2914 is a quad voltage supervisory IC ideally suitedfor monitoring multiple rails in a wide range of applications.Each monitored rail has two dedicated input pins, VHx and VLx, which allow each rail to be monitored for both overvoltage (OV) and undervoltage (UV) conditions. A common active lowundervoltage (UV) and overvoltage (OV) pin is shared by each of the monitored voltage rails.The ADM2914 includes a 1 V buffered reference output, REF,that acts as an offset when monitoring a negative voltage. Thethree-state SEL pin determines the polarity of the third andfourth inputs, that is, it configures the device to monitorpositive or negative supplies.The device incorporates an internal shunt regulator that enablesthe device to be used in higher voltage systems. This featurerequires a resistor to be placed between the main supply rail andthe VCC pin to limit the current flow into the VCC pin to no greater than 10 mA. The ADM2914 uses the internal shuntregulator to regulate VCC if the supply line exceeds the absolute maximum ratings.The ADM2914 is available in two models. The ADM2914-1offers a latching overvoltage output that can be cleared by toggling the LATCH input pin. The ADM2914-2 has a disablepin that can override and disable both the OV and UVoutputsignals.The ADM2914 is available in a 16-lead QSOP package. Thedevice operates over the extended temperature range of ?40?Cto +125?C.Applications Server supply monitoring FPGA/DSP core and I/O voltage monitoring Telecommunications equipment Medical equipment

The AD8422 is a high precision, low power, low noise, rail-to-rail instrumentation amplifier that delivers the best performance per unit microampere in the industry. The AD8422 processes signals with ultralow distortion performance that is load independent over its full output range.The AD8422 is the third generation development of the industry standard?AD620. The AD8422 employs new process technologies and design techniques to achieve higher dynamic range and lower errors than its predecessors, while consuming less than one-third of the power. The AD8422 uses the high performance pinout introduced by the AD8221.Very low bias current makes the AD8422 error-free with high source impedance, allowing multiple sensors to be multiplexed to the inputs. Low voltage noise and low current noise make the AD8422 an ideal choice for measuring a Wheatstone bridge.The wide input range and rail-to-rail output of the AD8422 bring all of the benefits of a high performance in-amp to single-supply applications. Whether using high or low supply voltages, the power savings make the AD8422 an excellent choice for high channel count or power sensitive applications.The AD8422 uses robust input protection that ensures reliability without sacrificing noise performance. The AD8422 has high ESD immunity, and the inputs are protected from continuous voltages up to 40 V from the opposite supply rail.A single resistor sets the gain from 1 to 1000. The reference pin can be used to apply a precise offset to the output voltage.The AD8422 is specified from ?40?C to +85?C for the 8-lead MSOP and the 8-lead SOIC_N and from ?40?C to +125?C for the 8-lead LFCSP.APPLICATIONS Medical instrumentation Industrial process controls Strain gages Transducer interfaces Precision data acquisition systems Channel-isolated systems Portable instrumentation

DC453B-B: Demo Board for LT1970A 500mA Power Op Amp with Adjustable Precision Current Limit.

Zero-Drift, Single-Supply, RRIO Quad Op Amp Features: Low offset voltage: 1 μV Input offset drift: 0.005 μV/°C Rail-to-rail input and output swing 5 V/2.7 V single-supply operation High gain: 145 dB typical CMRR: 140 dB typical PSRR: 130 dB typical See data sheet for additional featuresAD8574-EP supports defense and aerospace applications (AQEC standard) Download AD8574-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12634 DSCC Drawing Number

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Rail-to-Rail Output, Video Op Amps with Ultralow Power

Digitally Programmable Sensor Signal Amplifier Features: Very low offset voltage: 12 μV maximum over temperature  Very low input offset voltage drift:  65 nV/°C maximum High CMRR: 96 dB minimum  Digitally programmable gain and output offset voltage  Gain range from 28 to 1300  Single-wire serial interface  Stable with any capacitive load  SOIC and LFCSP packages  2.7 V to 5.5 V operation  Qualified for automotive applications

36 V Precision, 2.8 nV/√Hz Rail-to-Rail Output Op Amp

Precision RRIO Dual Op Amp Features: Single-supply operation  Wide bandwidth: 4 MHz  Low offset voltage: 65 μV  Unity-gain stable  High slew rate: 4.0 V/μs  Low noise: 3.9 nV/√HzOP284-EP supports defense and aerospace applications (AQEC standard) Download OP284-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14624 DSCC Drawing Number