Quad, 16-Bit nanoDAC+ with 2 ppm/C On-Chip Reference and SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16-bits Low drift 2.5 V reference:: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP or TSSOP Total unadjusted error (TUE): 0.1% of FSR maximum Offset error: 1.5 mV maximum Gain error: 0.1 % of FSR maximum See data sheet for additional featuresAD5686R-EP supports defense and aerospace applications (AQEC standard) Download AD5686R-EP Data Sheet (pdf) Temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14335 DSCC Drawing Number

Quad, 16-Bit nanoDAC+ with 2 ppm/C On-Chip Reference and SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16-bits Low drift 2.5 V reference:: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP or TSSOP Total unadjusted error (TUE): 0.1% of FSR maximum Offset error: 1.5 mV maximum Gain error: 0.1 % of FSR maximum See data sheet for additional featuresAD5686R-EP supports defense and aerospace applications (AQEC standard) Download AD5686R-EP Data Sheet (pdf) Temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14335 DSCC Drawing Number

The AD7766/AD7766-1/AD7766-2 are high performance,24-bit, oversampled SAR analog-to-digital converters (ADCs).The AD7766/AD7766-1/AD7766-2 combine the benefits of alarge dynamic range and input bandwidth, consuming 15 mW,10.5 mW, and 8.5 mW power, respectively, and are contained ina 16-lead TSSOP package.Ideal for ultralow power data acquisition (such as PCI- and USBbasedsystems), the AD7766/AD7766-1/AD7766-2 provide 24-bitresolution. The combination of exceptional SNR, wide dynamicrange, and outstanding dc accuracy make the AD7766/AD7766-1/AD7766-2 ideally suited for measuring small signal changes over awide dynamic range. This is particularly suitable for applicationswhere small changes on the input are measured on larger ac ordc signals. In such an application, the AD7766/AD7766-1/AD7766-2 accurately gather both ac and dc information.The AD7766/AD7766-1/AD7766-2 include an on-board digitalfilter (complete with linear phase response) that acts to eliminateout-of-band noise by filtering the oversampled input voltage.The oversampled architecture also reduces front-end antialiasrequirements. Other features of the AD7766/AD7766-1/AD7766-2include a SYNC/PD (synchronization/power-down) pin, allowingthe synchronization of multiple AD7766/AD7766-1/AD7766-2devices. The addition of an SDI pin provides the option of daisychaining multiple AD7766/AD7766-1/AD7766-2 devices.The AD7766/AD7766-1/AD7766-2 operate from a 2.5 V supplyusing a 5 V reference. The devices operate from ?40?C to +105?C. Applications Low power PCI/USB data acquisition systems Low power wireless acquisition systems Vibration analysis Instrumentation High precision medical acquisition

The AD7262/AD7262-5 are dual, 12-bit, high speed, low power, successive approximation ADCs that operate from a single 5 V power supply. The AD7262 features throughput rates of up to 1 MSPS per on-chip ADC. The AD7262-5 features throughput rates of up to 500 kSPS. Two complete ADC functions allow simultaneous sampling and conversion of two channels. Each ADC is preceded by a true differential analog input with a PGA. There are 14 gain settings available: ?1, ?2, ?3, ?4, ?6, ?8, ?12, ?16, ?24, ?32, ?48, ?64, ?96, and ?128.The AD7262/AD7262-5 contain four comparators. Comparator A and Comparator B are optimized for low power, while Comparator C and Comparator D have fast propagation delays. The AD7262/AD7262-5 feature a calibration function to remove any device offset error and programmable gain adjust registers to allow for input path (for example, sensor) offset and gain compensation. The AD7262/AD7262-5 have an on-chip 2.5 V reference that can be disabled if an external reference is preferred.The AD7262/AD7262-5 are ideally suited for monitoring small amplitude signals from a variety of sensors. They include all the functionality needed for monitoring the position feedback signals from a variety of analog encoders used in motor control systems.Product Highlights Integrated PGA with a variety of flexible gain settings to allow detection and conversion of low level analog signals. Each PGA is followed by a dual simultaneous sampling ADC, featuring throughput rates of 1 MSPS per ADC for the AD7262. The conversion results of both ADCs are simultaneously available on separate data lines or in succession on one data line if only one serial port is available. Four integrated comparators that can be used to count signals from pole sensors in motor control applications. Internal 2.5 V reference.

The?AD7792/AD7793 are low power, low noise, complete analog front ends for high precision measurement applications. The AD7792/AD7793 contain a low noise 16-/24-bit ?-? ADC with three differential analog inputs. The on-chip, low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC. With a gain setting of 64, the rms noise is 40 nV when the update rate equals 4.17 Hz.The devices contain a precision low noise, low drift internal band gap reference and can accept an external differential reference. Other on-chip features include programmable excitation current sources, burnout currents, and a bias voltage generator. The bias voltage generator sets the common-mode voltage of a channel to AVDD/2The devices can be operated with either the internal clock or an external clock. The output data rate from the parts is software-programmable and can be varied from 4.17 Hz to 470 Hz.The parts operate with a power supply from 2.7 V to 5.25 V. They consume a current of 400 ?A typical and are housed in a 16-lead TSSOP package.Applications Thermocouple measurements RTD measurements Thermistor measurements Gas analysis Industrial process control Instrumentation Portable instrumentation Blood analysis Smart transmitters Liquid/gas chromatography 6-digit DVM

2.5V to 5.5V, 115A Parallel Interface Single Voltage Output 12-Bit DAC Features:Single 12-Bit DAC in 20-Lead TSSOP Low power operation: 115 A @ 3 V, 140 A @ 5 VPower-down to 80 nA @ 3 V, 200 nA @ 5 V via PD Pin2.5 V to 5.5 V power supplyDouble-buffered input logicGuaranteed monotonic by design over all codesBuffered/unbuffered reference input optionsSee Data Sheet for Additional Information

2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP Features: 12-Bit ADC with Fast Conversion Time: 2 µs Two Single-Ended Analog Input Channels Specified for VDD of 2.7 V to 5.5 V Low Power Consumption Fast Throughput Rate: - 188 kSPS Sequencer Operation Automatic Cycle Mode I2C® Compatible Serial Interface I2C® Interface supports: Standard, Fast, and High-Speed Modes Out of Range Indicator Pin-Selectable Addressing via AS Automatic Shutdown Mode: - 1 µA max

Single Channel, 16-Bit Current/Voltage Output DAC with HART Connectivity Features: 16-bit resolution and monotonicity Current or voltage output available on a single terminal Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA, 0 mA to 24 mA, ±20 mA, ±24 mA, and −1 mA to +22 mA Voltage output ranges (with 20% overrange): 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V User programmable offset and gain Advanced on-chip diagnostics, including a 12-bit ADC On-chip reference −40°C to +115°C temperature range 32-Lead, 5 mm × 5 mm LFCSP package

Quad, 16-Bit nanoDAC with 5ppm/C On-Chip Reference Features: Low power, smallest pin-compatible, quad nanoDACs  AD5664R: 16 bits AD5644R: 14 bits AD5624R: 12 bits User selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference 10-lead MSOP; 10-lead, 3 mm × 3 mm LFCSP_WD; and 12-ball, 1.665 mm × 2.245 mm WLCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Serial interface, up to 50 MHz

16-Channel, 12-/16-Bit nanoDAC+ with 2 ppm/C Voltage Reference TC, I2C Interface Features: High relative accuracy (INL): ±4 LSB maximum at 16 bits (AD5677R only) TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference TC: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP