MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC Features:Flexible reconfigurable common platform design 4 DACs and 2 ADCs (4D2A) and 2D2A options Supports single, dual, and quad band Datapaths and DSP blocks are fully bypassableDAC to ADC sample rate ratios of 1, 2, 3, and 4 On-chip PLL with multichip synchronization External RFCLK input option for off-chip PLL Maximum DAC sample rate up to 12 GSPS Maximum data rate up to 12 GSPS using JESD204C Useable analog bandwidth to 8 GHz Maximum ADC sample rate up to 6 GSPS Maximum data rate up to 6 GSPS using JESD204C Useable analog bandwidth to 8 GHz ADC ac performance at 6 GSPS, input at 2.7 GHz, 1 dBFS Full-scale input voltage: 1.475 V p-p Noise density: 147.5 dBFS/Hz Noise figure: 25.3 dB HD2: 72 dBFS HD3: 68 dBFS Worst other (excluding HD2 and HD3): 78 dBFS DAC ac performance at 12 GSPS, output at 2.6 GHz Full-scale output current range: 6.43 mA to 37.75 mA Two-tone IMD3 (6 dBFS per tone): 72 dBc NSD, single-tone: 160 dBc/Hz SFDR, single-tone: 75 dBc Versatile digital features Selectable interpolation and decimation filters Configurable DDC and DUC 8 fine complex DUCs and 4 coarse complex DUCs 8 fine complex DDCs and 4 coarse complex DDCs 48-bit NCO per DUC or DDC Option to bypass fine and coarse DUC/DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Programable delay per data path Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Fine DUC channel gain control and delay adjust Coarse DDC delay adjust for DPD observation path Auxiliary features Fast frequency hopping Direct digital synthesis (DDS) Low latency loopback modes (receive datapath data can be routed to the transmit datapaths) ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Flexible GPIO pins TDD power savings option SERDES JESD204B/JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JT×) and 8 lanes JESD204B/C receiver (JR×) JESD204B compliance with the maximum 15.5 Gbps JESD204C compliance with the maximum 24.75 Gbps Supports real or complex digital data (8-, 12-, 16-, or 24-bit) 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

Quad, Low Power, 12-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator Features: Highly integrated quad DAC On-chip 4096 × 12-bit pattern memory On-chip DDS Power dissipation at 3.3 V, 4 mA output typical 315.25 mW at 180 MSPS Power-down mode: <5 mW at 3.3 V Supply voltage: 1.8 V to 3.3 V SFDR to Nyquist: 86 dBc at 10 MHz output Phase noise at 1 kHz offset, 180 MSPS, 4 mA: −140 dBc/Hz Differential full-scale current outputs: 8 mA maximum at 3.3 V Small footprint, 5 mm × 5 mm with 3.5 mm × 3.6 mm exposed paddle, 32-lead LFCSP RoHS compliant package

Dual, 16-Bit, 12.6 GSPS RF DAC with Wideband Channelizers Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 3.08 GSPS maximum complex input data rate per input channel 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD3 = −83 dBc at 1.84GHz, −7 dBFS/tone RF output SFDR <−80 dBc at 1.84 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1 Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.54 W with 2 DACs at 12 GSPS, DAC PLL on 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

16-Bit, 2.5 MHz/5 MHz/10 MHz, 30 MSPS to 160 MSPS Dual Continuous Time Sigma-Delta ADC Features: SNR: 83 dB (85 dBFS) to 10 MHz input SFDR: 87 dBc to 10 MHz input Noise figure: 15 dB Input impedance: 1 kΩ Power: 600 mW 1.8 V analog supply operation 1.8 V to 3.3 V output supply Selectable bandwidth 2.5 MHz/5 MHz/10 MHz real 5 MHz/10 MHz/20 MHz complex Output data rate: 30 MSPS to 160 MSPS See data sheet for additional features

Octal LNA/VGA/AAF/ADC and Crosspoint Switch Features: 8 channels of LNA, VGA, AAF, and ADC Low noise preamplifier (LNA) - See data sheet for additional information Variable gain amplifier (VGA) - See data sheet for additional information Antialiasing filter (AAF) - See data sheet for additional information Analog-to-digital converter (ADC) - See data sheet for additional information Includes an 8 × 8 differential crosspoint switch to support continuous wave (CW) Doppler Low power, 109 mW per channel at 12 bits/40 MSPS (TGC) 70 mW per channel in CW Doppler Flexible power-down modes Overload recovery in <10 ns See data sheet for additional features

12 Channel, 8-Bit TrimDACs with Power Shutdown & Mid-Scale Preset Features: Low Cost Replaces 12 Potentiometers Individually Programmable Outputs 3-Wire SPI Compatible Serial Input Power Shutdown < 55 µWatts  Including IDD & IREF Midscale Preset, AD8802 Separate VREF Range Settling, AD8804 +3 to +5 Single Supply Operation

4-Channel, 4 MSPS, 12-Bit, Dual, Simultaneous Sampling SAR ADCs Features: 16-bit, 14-bit, or 12-bit dual simultaneous sampling SAR ADC Single-ended analog inputs 4-channel with 2:1 multiplexers Channel sequencer mode High throughput rate of up to 4 MSPS SNR (typical) 87.5 dB (AD7386), VREF = 3.3 V external 84 dB (AD7387), VREF = 3.3 V external 73.8 dB (AD7388) 93 dB with OSR = 8, VREF = 2.5 V internal (AD7386) On-chip oversampling functions INL (typical) ±1.5 LSB (AD7386) ±0.5 LSB (AD7387) ±0.2 LSB (AD7388) Resolution boost function 2.5 V internal reference at 10 ppm/°C (maximum) Alert function −40°C to +125°C temperature range 16-lead, 3 mm × 3 mm LFCSP

16-Bit, Isolated Sigma-Delta Modulator Features: 5 MHz to 20 MHz external clock input rate 16 bits, no missing codes Signal to noise ratio (SNR): 88 dB (typical) Effective number of bits (ENOB): 14.2 bits typical Typical offset drift vs. temperature: 1.6 μV/°C typical On-board digital isolator On-board reference See data sheet for additional featuresAD7403-EP supports defense and aerospace applications (AQEC standard) Download AD7403-EP data sheet Military temperature range: −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/16625 DSCC Drawing Number

Dual 12-Bit CMOS DAC with Parallel Load Input Structure Features: Two 12-bit DACs in One Package DAC Ladder Resistance Matching: 0.5% Space Saving Skinny DIP and Suface Mount Packages 4-Quadrant Multiplication Low Gain Error (1 LSB max Over Temperature) Fast Interface Timing

CMOS Dual 8-Bit Buffered Multiplying DAC Features: On-Chip Latches for both DACs +12 V to +15 V Operation DACs matched to 1% Four Quadrant Multiplication TTL/CMOS Compatible from +12 V to +15 V Latch Free (Protection Schottkys not Required)