Single Supply, Multichannel, 31.25 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 s settling)17.3 noise free bits at 1007 SPS per channel120 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating: 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedance0.07% TUE at 25COn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 3.0 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 3.9 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

24-Bit, 8-/16-Channel, 250 kSPS, Sigma-Delta ADC with True Rail-to-Rail Buffers Features: Fast and flexible output rate: 5 SPS to 250 kSPS Performance specifications 17.2 noise free bits at 250 kSPS 20.2 noise free bits at 2.5 kSPS 24 noise free bits at 20 SPS INL: ±1 ppm of FSR 85 dB filter rejection of 50 Hz and 60 Hz with 50 ms settling 85 dB filter rejection of 50 Hz and 60 Hz with 50 ms settling User configurable input channels 8 fully differential channels or 16 single-ended channels Crosspoint multiplexer Channel scan data rate of 50 kSPS/channel (20 ìs settling) On-chip 2.5 V reference (±2 ppm/°C drift) True rail-to-rail analog and reference input buffers Internal or external clock Power supply: AVDD1 − AVSS = 5 V, AVDD2 = IOVDD = 2 V to 5 V (nominal) Split supply with AVDD1/AVSS at ±2.5 V ADC current: 8.4 mA Temperature range: −40°C to +105°C 3- or 4-wire serial digital interface (Schmitt trigger on SCLK) Serial port interface (SPI), QSPI, MICROWIRE, and DSP compatible

Dual, 16-Bit nanoDAC+ with 2 ppm/C Reference, SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16 bits  Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP TUE: ±0.1% of FSR maximum  Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails  User-selectable gain of 1 or 2 (GAIN pin)  Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 3.3 mW at 3 V  2.7 V to 5.5 V power supply −40°C to +105°C temperature range AEC-Q100 qualified for automotive applicationsAD5689R-EP supports defense and aerospace applications (AQEC standard) Download AD5689R-EP Data Sheet (pdf) Temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14634 DSCC Drawing Number

4-Channel, I2C, Ultralow Power 12-Bit ADC in 20-Lead LFCSP/TSSOP Features: I2C-compatible serial interface supports standard and fast modes Ultralow power: 90 μW typical at 3 V in fast mode Specified for VDD of 2.7 V to 5.25 V On-chip accurate 2.5 V reference, 5 ppm/°C typical drift 4 single-ended analog input channels ALERT function BUSY function Autocycle mode Wide input bandwidth 68 dB signal-to-noise ratio (SNR) typical at input frequency of 1 kHz Flexible power/throughput rate management No pipeline delays Power-down mode 550 nA typical at VDD = 5.25 V 435 nA typical at VDD = 3 V 20-lead LFCSP and TSSOP packages Temperature range: −40°C to +125°C

8-Channel DAS with 16-Bit, 800 kSPS Bipolar Input, Simultaneous Sampling ADC Features:16-bit ADC with 800 kSPS on all channels Input buffer with 5 M analog input impedance Pin to pin compatible with the AD7606 −40°C to +125°C operating temperature range Single 5 V analog supply and 1.71 V to 3.6 V VDRIVE supply ±21 V input clamp protection with 8 kV ESDExtra modes available in software mode Per channel selectable analog input ranges Single-ended, bipolar: ±10 V, ±5 V, and ±2.5 V Per channel system phase, offset, and gain calibration Analog input open circuit detection feature <20 LSB open circuit code error (RPD = 10 k) Self diagnostics and monitoring features CRC error checking on read/write data and registers

16-Bit, Isolated, Sigma-Delta Modulator Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.25 μV/°C SNR: 82 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±64 mV ENOB: 13 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range: −40°C to +125°C High isolation common-mode transient immunity: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

The AD7888 is a high speed, low power, 12-bit ADC that operates from a single 2.7 V to 5.25 V power supply. The AD7888 is capable of a 125 kSPS throughput rate. The input track-and-hold acquires a signal in 500 ns and features a single ended sampling scheme. The AD7888 contains eight single-ended analog inputs, AIN1 through AIN8. The analog input on each of these channels is from 0 to VREF. The part is capable of converting full power signals up to 3 MHz.The AD7888 features an on-chip 2.5 V reference that can be used as the reference source for the A/D converter. The REF IN/REF OUT pin allows the user access to this reference. Alternatively, this pin can be overdriven to provide an external reference voltage for the AD7888. The voltage range for this external reference is from 1.2 V to VDD.CMOS construction ensures low power dissipation of typically 2 mW for normal operation and 3 µW in power-down mode. The part is available in a 16-lead narrow body small outline (SOIC) and a 16-lead thin small shrink outline (TSSOP) package.

Dual, 16-Bit, 6.2 GSPSRF DAC with SingleChannelizer Features: Supports single-band wireless applications 1 complex data input channel per RF DAC 516 MSPS maximum complex input data rate per input channel 1 independent NCO per input channel Proprietary,  low spurious and distortion design 2-tone IMD = −83 dBc at 1.8 GHz, −7 dBFS/tone RF output SFDR < −80 dBc at 1.8 GHz, −7 dBFS RF output Flexible 8-lane,  15.4 Gbps JESD204B interface Supports single-band use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1 Selectable interpolation filter for a complete set of input data rates 2×, 3×, 4×, and 6× configurable data channel interpolation 6× and 8× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 3.1 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 6.2 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 1.45 W at 6 GSPS, single-channel mode 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

2.7 V to 5.5 V, 450 A, Rail-to-Rail Output, Quad, 12-Bit nano DAC Features: Low power quad nanoDACs: 12 Bits Guaranteed monotonic by design Relative Accuracy: ±12 LSBs max 10-lead MSOP and 3mm × 3mm LFCSP_WD package 2.7 V to 5.5 V power supply Power-on reset to zero Per channel power-down Serial interface, up to 50MHz

6-Channel, 14-Bit, Current Output DAC with On-Chip Reference, SPI Interface Features: 6-channel, current output DAC 14-bit resolution Programmable output current ranges Channel 0: 0 mA to 300 mA, −60 mA to +300 mA, −60 mA to 0 mA Channel 1: 0 mA to 140 mA, 0 mA to 250 mA Channel 2: 0 mA to 55 mA, 0 mA to 150 mA Channel 3, Channel 4, Channel 5: 0 mA to 45 mA, 0 mA to 100 mA All current sourcing output ranges scale back by up to 0.5× 1.25 V, on-chip voltage reference Integrated precision reference resistor SPI interface Reset function Output current monitor Compliance voltage monitor Die temperature monitor Integrated thermal shutdown 49-ball, 4 mm × 4 mm WLCSP package Operating temperature: −40°C to +105°C