Compact, 800 mA, 3 MHz, Step-Down DC-to-DC Converter with an Internal Discharge Switch Features: Input voltage: 2.3 V to 5.5 V Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 24 μA Very small solution size 6-lead, 1 mm × 1.5 mm WLCSP package Fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier, compensation, and soft start Current overload and thermal shutdown protections Ultralow shutdown current: 0.2 μA (typical) Forced PWM and automatic PWM/PSM modes Supported by ADIsimPower™ design tool

ADP3333 - High Accuracy UltraLow IQ, 300mA, ANYCAP Low Dropout Regulator

Microprocessor Supervisory Circuit

Digital Controller for Isolated Power Supply Applications

Tiny I2C Programmable Linear Battery Charger with Power Path and USB Mode Compatibility Features: 2.6 mm x 2 mm WLCSP Package Fully programmable via I2C Flexible digital control inputs Up to 2.1 A current from an ac charger in LDO mode Operating input voltage from 4.0 V to 6.7 V Tolerant input voltage -0.5 V to +20 V (USB VBUS) Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2 Built-in current sensing and limiting As low as 30 mΩ battery isolation FET between battery and charger output Thermal regulation prevents over heating Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up.

3-Channel Digital Power Supply Controller

LOAD SWITCH 5.5V 3A HI SIDE 6WLCSP; Power Load Switch Type:High Side; Input Voltage:5.5V; Current Limit:4A; On State Resistance:0.01ohm; Distribution Switch Case Style:WLCSP; No. of Pins:6Pins; Thermal Protection:Yes; On / Enable Input Polarity:Active High; No. of Outputs:1Outputs; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:ADP196 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Operating Temperature Range:-40°C to +85°C

Integrated Circuit True RMS-to-DC Converter

Hot Swap Controller and I2C Power Monitor Features: Allows safe board insertion and removal from a live backplane  Controls supply voltages from 3.15 V to 16.5 V  Precision current sense amplifier  Precision voltage input  12-bit ADC for current and voltage readback  Charge pumped gate drive for external N-channel FET  I2C fast mode-compliant interface (400 kHz maximum) Adjustable analog current limit with circuit breaker  ±3% accurate hot swap current limit level  Fast response limits peak fault current  Automatic retry or latch-off on current fault  Programmable hot swap timing via TIMER pin  Active-high ON pin  2 address pins allow 16 devices on the same bus 10-lead MSOP

Super Sequencer with Margining Control and Temperature Monitoring Features: Complete supervisory and sequencing solution for up to 10 supplies 10 supply fault detectors enable supervision of supplies to: <0.5% accuracy at all voltages at 25°C <1.0 % accuracy across all voltages and temperatures 5 selectable input attenuators allow supervision of: Supplies up to 14.4 V on VH Supplies up to 6 V on VP1 to VP4 (VPn) 10 programmable output drivers (PDO1 to PDO10): Open collector with external pull-up Push/pull output, driven to VDDCAP or VPx Open collector with weak pull-up to VDDCAP or VPx Internally charge-pumped high drive for use with external N-FET (PDO1 to PDO6 only) Sequencing engine (SE) implements state machine control of PDO outputs State changes conditional on input events Enables complex control of boards Power-up and power-down sequence control Fault event handling Interrupt generation on warnings Watchdog function can be integrated in SE Program software control of sequencing through SMBus 5 dual-function inputs, VX1 to VX5 (VXn) High impedance input to supply fault detector with thresholds between 0.573 V and 1.375 V General-purpose logic input Complete voltage margining solution for 6 voltage rails 6 voltage output, 8-bit DACs (0.300 V to 1.551 V) allow voltage adjustment via dc-to-dc converter trim/feedback node 12-bit ADC for readback of all supervised voltages Internal and external temperature sensors Reference input (REFIN) has 2 input options Driven directly from 2.048 V (±0.25%) REFOUT pin More accurate external reference for improved ADC performance Device powered by the highest of VPx, VH for improved redundancy User EEPROM: 256 bytes Industry-standard 2-wire bus interface (SMBus) Guaranteed PDO low with VH, VPx = 1.2 V Available in 40-lead, 6 mm × 6 mm LFCSP and 48-lead, 7 mm × 7 mm TQFP packages