5V, 12-Bit, Serial 220 kSPS ADC in a 8-Lead Package Features: Fast 12-Bit ADC with 220 kSPS Throughput Rate 8-Lead SOIC Single 5 V Supply Operation High Speed, Flexible, Serial Interface that Allows Interfacing to 3 V Processors On-Chip Track/Hold Amplifier Selection of Input Ranges: ±10 V for AD7898-10 ±2.5 V for AD7898-3 High Input Impedance Low Power: 22.5 mW Max

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

High Current Output, Triple Video Amplifier Features: Drives 13 V Output Drives Unlimited Capacitive Load High Current Output Drive: 70 mA Excellent Video Specifications (RL = 150 Ω) Gain Flatness 0.1 dB to 10 MHz 0.06% Differential Gain Error 0.02° Differential Phase Error Power Operates on ±2.5 V to ±7.5 V Supply 10.0 mA/Amplifier Max Power Supply Current High Speed 250 MHz Unity Gain Bandwidth (3 dB) 1200 V/µs Slew Rate Fast Settling Time of 35 ns (0.1%) High Speed Disable Function Turn-Off Time 30 ns Easy to Use 200 mA Short Circuit Current Output Swing to 1 V of Rails

3 V to 5 V Single Supply, 200 kSPS, 12-Bit, Parallel Sampling ADC Features:Specified for VDD of 3 V to 5.5 V Read-Only Operation AD7854200 kSPS; AD7854L100 kSPS System and Self-Calibration Flexible Parallel Interface12-Bit Parallel/8-Bit Parallel (AD7854) 28-Lead DIP, SOIC and SSOP Packages (AD7854) Low Power:- Normal OperationAD7854: 15 mW (VDD = 3 V)AD7854L: 5.5 mW (VDD = 3 V)- Automatic Power-Down AfterConversion (25 W)AD7854: 1.3 mW 10 kSPSAD7854L: 650 W 10 kSPS

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

Ultralow Power, Active High Shutdown and an Active Low Receiver Enable Features: RS-232 Compatible  Operates with 3 V or 5 V Logic  Ultralow Power CMOS: 1.3 mA Operation  Low Power Shutdown: 0.2 µA  Suitable for Serial Port Mice 116 kbits/s Data Rate  1 µF Charge Pump Capacitors  Single +3 V to +3.6 V Power Supply  Two Receivers Active in Shutdown (ADM560) 

Microprocessor Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 250mA Output Current Features: Low Power Consumption Precision Voltage Monitor ±2% Tolerance on ADM800L/M Reset Time Delay—200 ms, or Adjustable 1 µA Standby Current Automatic Battery Backup Power Switching Fast Onboard Gating of Chip Enable Signals Also Available in TSSOP Package (ADM691A)

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool