The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 ?A at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates.The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ?2 g, ?4 g, and ?8 g are available, with a resolution of 1 mg/LSB on the ?2 g range. For applications where a noise level lower than the normal 550 ?g/?Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 ?g/?Hz typical) can be selected at minimal increase in supply current.In addition to its ultralow power consumption, the ADXL362 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and several activity detection modes including adjustable threshold sleep and wake-up operation that can run as low as 270 nA at a 6 Hz (approximate) measurement rate. A pin output is provided to directly control an external switch when activity is detected, if desired. In addition, the ADXL362 has provisions for external control of sampling time and/or an external clock.The ADXL362 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL362 is available in a 3 mm ? 3.25 mm ? 1.06 mm package.APPLICATIONS Hearing aids Home healthcare devices Motion enabled power save switches Wireless sensors Motion enabled metering devices

3-Axis, 200 g Digital MEMS Accelerometer Features: Low power: as low as 35 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) Power consumption scales automatically with bandwidth Embedded, 32-level FIFO buffer minimizes processor load Bandwidth of up to 1 kHz Bandwidth selectable via serial command Shock event detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- or 4-wire) and I2C digital interfaces Wide temperature range: −40°C to +85°C 10,000 g shock survival Pb free/RoHS compliant Small and thin: 3 mm × 5 mm × 1 mm LGA packageADXL375-EP supports defense and aerospace applications (AQEC standard)Download ADXL375-EP Data Sheet (pdf)Extended industrial temperature range: −55°C to +105°CControlled manufacturing baseline1 assembly/test site1 fabrication siteProduct change notificationQualification data available on requestV62/ 18612 DSCC Drawing Number

Accelerometers High Perf 3-Axis Digit +/-2g/+/-4g/+/-8g Accel

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Small, Low Power, 3-Axis 2 g Accelerometer Features:3-axis sensingSmall, low profile package4 mm 4 mm 1.45 mm LFCSPLow power: 350 A typicalSingle-supply operation: 1.8 V to 3.6 V10,000 g shock survivalExcellent temperature stabilityBandwidth adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant

Micropower, 3-Axis, 400 g, Digital Output, MEMS Accelerometer Features: ±400 g measurement range 160 Hz to 2560 Hz user selectable bandwidth with 4-pole antialiasing filter Selectable oversampling ratio Adjustable high-pass filter Ultra Low power Power can be derived from a coin cell battery 19 μA at 2560 Hz ODR, 2.5 V supply Low power wake-up mode for low g activity detection 1.4 μA instant on mode with adjustable threshold 0.1 μA standby mode Built-in features for system level power savings Autonomous interrupt processing without processor intervention Ultra low power event monitoring: detects impacts and wakes up fast enough to capture the transient events Adjustable low g threshold activity and inactivity detection Wide operating voltage range: 1.6 V to 3.5 V Acceleration sample synchronization via external trigger SPI digital interface and I2C interface format support 12-bit output at 200 mg/LSB scale factor Wide temperature range: −40°C to +105°C Small, thin 3.00 mm × 3.25 mm × 1.06 mm package

3-Axis, 0.5 g/1 g/2 g/4 g Digital Accelerometer Features: Ultralow power (scales automatically with data rate) As low as 30 μA in measurement mode (VS = 3.3 V) As low as 0.1 μA in standby mode (VS = 3.3 V) Low noise performance 150 μg/√Hz typical for X- and Y-axes 250 μg/√Hz typical for the Z-axis Embedded, patent pending FIFO technology minimizes host processor load User-selectable resolution Fixed 10-bit resolution for any g range Fixed 1024 LSB/g sensitivity for any g range Resolution scales from 10-bit at ±0.5 g to 13-bit at ±4 g Built-in motion detection functions for activity/inactivity monitoring Supply and I/O voltage range: 2.0 V to 3.6 V See data sheet for additional features

3-Axis 1g/2g/4g/8g Digital Accelerometer Features: Excellent Zero-g bias accuracy and stability with minimum/maximum specifications User-selectable resolution Fixed 10-bit resolution Full resolution, where resolution increases with g range, up to 13-bit resolution at ±8 g (maintains 2 mg/LSB scale factor in all g ranges) Embedded, 32-level FIFO buffer minimizes host processor load Tap/double tap detection and free-fall detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS See data sheet for additional features

Low Noise, Low Drift, Low Power, 3-Axis MEMS Accelerometers Features: Hermetic package offers excellent long-term stability 0 g offset vs. temperature (all axes): 0.15 mg/°C maximum Ultralow noise density (all axes): 22.5µg/√Hz Low power, VSUPPLY (LDO regulator enabled) ADXL354 in measurement mode: 150 μA ADXL355 in measurement mode: 200 μA ADXL354/ADXL355 in standby mode: 21 μA ADXL354 has user adjustable analog output bandwidth Electromechanical self test Integrated temperature sensor ADXL355 digital output features Digital SPI and I2C interfaces supported 20-bit ADC Data interpolation routine for synchronous sampling Programmable high- and low-pass digital filters Voltage range options VSUPPLY with internal regulators: 2.25 V to 3.6 V V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V typical ± 10% Operating temperature range: −40°C to +125°C 14-terminal, 6 mm × 5.6 mm × 2.2 mm, LCC package

Micropower, 3-Axis, 200 g Digital Output, MEMS Accelerometer Features: ±200 g measurement range 160 Hz to 2560 Hz user selectable bandwidth with four-pole antialiasing filter Selectable oversampling ratio Adjustable high-pass filter Ultra low power Power can be derived from a coin cell battery 28 µA at 2560 Hz ODR, 3.3 V supply Low power, wake-up mode for low g activity detection 1.7 A instant on mode with adjustable threshold Built in features for system level power savings Autonomous interrupt processing without processor intervention Ultra low power event monitoring detects impacts and wakes up fast enough to capture the transient events Adjustable, low g threshold activity and inactivity detection Wide operating voltage range: 2.5 V to 3.5 V Acceleration sample synchronization via external trigger SPI digital interface and I2C interface format support 12-bit output at 100 mg/LSB scale factor Wide temperature range: 40°C to +105°C Small, thin, 3 mm × 3.25 mm × 1.06 mm package