Ultralow noise, dual-axis MEMS Gyroscope for Stabilization Applications Features: Pitch and roll rate gyroscope Ultralow noise: 0.004°/s/√Hz High vibration rejection over a wide frequency range Power saving standby mode 80 µA current consumption in standby mode Fast startup time from standby mode: <100 ms Low delay of <0.5 ms for a 30 Hz input at the widest bandwidth setting Serial peripheral interface (SPI) digital output Programmable high-pass and low-pass filters 2000 g powered acceleration survivability 2.7 V to 5.0 V operation −25°C to +85°C operation 4.5 mm × 5.8 mm × 1.2 mm cavity laminate package

ANALOG DEVELOPMENT KIT ACCESSORIES;

Integrated AMR Angle Sensor and Signal Conditioner with Differential Outputs Features: Contactless angular measurement High precision 180° angle sensor Typical angular error of ±0.1° Low output noise of 850 μV rms Sine and cosine differential outputs Ratiometric analog voltage outputs Negligible hysteresis SAR or Σ-Δ ADC compatible Temperature compensated AMR bridge Industrial temperature range: −40°C to +125°C Automotive temperature range: −40°C to +150°C EMI resistant Fault diagnostics VDD from 2.7 V to 5.5 V Minimal phase error of 0.85° at 30,000 rpm AEC-Q100 qualified for automotive applications Single chip solution Available in an 8-lead SOIC package

Accelerometers Single AxisHigh-g

MEMS ACCELEROMETER, X/Y, PWM, LCC ROHS COMPLIANT: YES

IMUs - Inertial Measurement Units Hi-Precision Tri-Axis Inertial Sensor

Board Mount Temperature Sensors AD534JHZTEMPERATURE TRANSDUCER IC

The ADXL325 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±5 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL325 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

The ADXL327 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±2 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL327 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

The ADXL346 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C® digital interface.The ADXL346 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes of less than 1.0°.Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. Orientation detection is capable of concurrent four- and six-position sensing and a user-selectable interrupt on orientation change for 2D or 3D applications. These functions can be mapped individually to either of two interrupt output pins. An integrated, patent pending memory management system with 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption.Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.The ADXL346 is supplied in a small, thin, 3 mm × 3 mm × 0.95 mm, 16-lead, plastic package.APPLICATIONS Handsets Medical instrumentation Gaming and pointing devices Industrial instrumentation Personal navigation devices Hard disk drive (HDD) protection