Silicon SPDT Switch, Reflective, 9 kHz to 44 GHz Features: Ultrawideband frequency range: 9 kHz to 44 GHz Reflective design Low insertion loss with impedance match 0.9 dB typical to 18 GHz 1.4 dB typical to 40 GHz 1.6 dB typical to 44 GHz Low insertion loss without impedance match 0.9 dB typical to 18 GHz 1.7 dB typical to 40 GHz 2.2 dB typical to 44 GHz High input linearity P1dB: 27.5 dBm typical IP3: 50 dBm typical High RF input power handling Through path: 27 dBm Hot switching: 27 dBm No low frequency spurious RF settling time (50% VCTL to 0.1 dB final RF output): 3.4 μs 12-terminal, 2.25 mm × 2.25 mm LGA package Pin compatible with the ADRF5024 fast switching version

Silicon SPDT Switch, Reflective, 9 kHz to 44 GHz Features: Ultrawideband frequency range: 9 kHz to 44 GHz Reflective design Low insertion loss with impedance match 0.9 dB typical to 18 GHz 1.4 dB typical to 40 GHz 1.6 dB typical to 44 GHz Low insertion loss without impedance match 0.9 dB typical to 18 GHz 1.7 dB typical to 40 GHz 2.2 dB typical to 44 GHz High input linearity P1dB: 27.5 dBm typical IP3: 50 dBm typical High RF input power handling Through path: 27 dBm Hot switching: 27 dBm No low frequency spurious RF settling time (50% VCTL to 0.1 dB final RF output): 3.4 μs 12-terminal, 2.25 mm × 2.25 mm LGA package Pin compatible with the ADRF5024 fast switching version

Silicon SPDT Switch, Nonreflective, 100 MHz to 44 GHz Features: Ultrawideband frequency range: 100 MHz to 44 GHz Nonreflective design Low insertion loss: 1.2 dB to 18 GHz 1.7 dB to 26 GHz 2.4 dB to 40 GHz 3.8 dB to 44 GHz High isolation 55 dB to 18 GHz 53 dB to 26 GHz 50 dB to 40 GHz 45 dB to 44 GHz High input linearity P1dB: 27 dBm typical IP3: 53 dBm typical High power handling 24 dBm insertion loss path 24 dBm isolation path All off state control No low frequency spurious signals 0.1 dB RF settling time: 40 ns typical 20-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5027, low frequency cutoff versionADRF5026-EP supports defense and aerospace applications (AQEC standard) Download ADRF5026-EP data sheet (pdf) Supports defense and aerospace applications (AQEC standard) Military temperature range (−55°C to +105°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/21601 DSCC Drawing Number

Silicon SPDT Switch, Nonreflective, 100 MHz to 44 GHz Features: Ultrawideband frequency range: 100 MHz to 44 GHz Nonreflective design Low insertion loss: 1.2 dB to 18 GHz 1.7 dB to 26 GHz 2.4 dB to 40 GHz 3.8 dB to 44 GHz High isolation 55 dB to 18 GHz 53 dB to 26 GHz 50 dB to 40 GHz 45 dB to 44 GHz High input linearity P1dB: 27 dBm typical IP3: 53 dBm typical High power handling 24 dBm insertion loss path 24 dBm isolation path All off state control No low frequency spurious signals 0.1 dB RF settling time: 40 ns typical 20-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5027, low frequency cutoff versionADRF5026-EP supports defense and aerospace applications (AQEC standard) Download ADRF5026-EP data sheet (pdf) Supports defense and aerospace applications (AQEC standard) Military temperature range (−55°C to +105°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/21601 DSCC Drawing Number

Nonreflective, 9 kHz to 44 GHz Silicon SP4T Switch Features: Ultrawideband frequency range: 9 kHz to 44 GHz Nonreflective 50 Ω design Low insertion loss: 1.5 dB at 18 GHz 2.4 dB at 40 GHz 2.5 dB at 44 GHz High isolation: 44 dB at 18 GHz 39 dB at 40 GHz 36 dB at 44 GHz High input linearity: P0.1dB: 26 dBm typical IP3: 48 dBm typical High power handling 24 dBm through path 24 dBm terminated path All off state control Logic select control No low frequency spurs Settling time (0.1 dB final RF output): 6 μs 24-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5042, fast switching version

The ADG1414 is a monolithic complementary metal oxide semiconductor (CMOS) device containing eight independently selectable switches designed on an industrial CMOS (iCMOS®) process. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar technologies. iCMOS components can tolerate high supply voltages while providing increased performance, dramatically lower power consumption, and reduce the package size.The ADG1414 is a set of octal SPST (single-pole, single-throw) switches controlled via a 3-wire serial interface. On resistance is closely matched between switches and is very flat over the full signal range. Each switch conducts equally well in both directions and the input signal range extends to the supplies.Data is written to these devices in the form of eight bits; each bit corresponds to one channel.The ADG1414 utilizes a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The output of the shift register, SDO, enables a number of these parts to be daisy chained.On power-up, all switches are in the off condition, and the internal registers contain all zeros.PRODUCT HIGHLIGHTS 50 MHz serial interface. 9.5 Ω on resistance. 1.6 Ω on-resistance flatness. 24-lead TSSOP and 4 mm × 4 mm LFCSP packages.APPLICATIONS Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Audio signal routing Video signal routing Communication systems

The ADG1606 and ADG1607 are monolithic iCMOS® analogmultiplexers comprising of 16 single channels and eightdifferential channels, respectively. The ADG1606 switches one of16 inputs to a common output, as determined by the 4-bitbinary address lines (A0, A1, A2, and A3). The ADG1607switches one of eight differential inputs to a common differentialoutput, as determined by the 3-bit binary address lines (A0, A1,and A2). An EN input on both devices enables or disables thedevice. When disabled, all channels switch off. When enabled,each channel conducts equally well in both directions and has aninput signal range that extends to the supplies.The ultralow on resistance and on-resistance flatness of theseswitches make them ideal solutions for data acquisition andgain switching applications where low distortion is critical.iCMOS® construction ensures ultralow power dissipation,making the parts ideally suited for portable and battery-poweredinstruments.Product Highlights 7.5 Ω maximum on resistance over temperature. Minimum distortion: THD + N = 0.04% 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. No VL logic power supply required.Applications Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements

The ADG1636 is a monolithic CMOS device containing twoindependently selectable single-pole/double-throw (SPDT)switches. An EN input is used to enable or disable the device.When disabled, all channels are switched off. Each switch conductsequally well in both directions when on and has an input signalrange that extends to the supplies. In the off condition, signallevels up to the supplies are blocked. Both switches exhibitbreak-before-make switching action for use in multiplexerapplications.The ultralow on resistance of these switches make them idealsolutions for data acquisition and gain switching applications wherelow on resistance and distortion is critical. The on resistance profileis very flat over the full analog input range, ensuring excellentlinearity and low distortion when switching audio signals.The CMOS construction ensures ultralow power dissipation,making the devices ideally suited for portable and battery-poweredinstruments.Product Highlights 1.6 Ω maximum on resistance over temperature. Minimum distortion: THD + N = 0.007%. 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. No VL logic power supply required. Ultralow power dissipation: <16 nW. 16-lead TSSOP and 16-lead 4 mm × 4 mm LFCSP.Applications Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements

The ADG4612 & ADG4613 contain four independent single-pole/single-throw (SPST) switches. The ADG4612 switches areturned on with Logic 1 on the appropriate control input. TheADG4613 has two switches with digital control logic similar tothat of the ADG4612; the logic is inverted on the other twoswitches. Each switch conducts equally well in both directionswhen on and has an input signal range that extends to thesupplies. The ADG4613 exhibits break-before-make switchingaction for use in multiplexer applications.When no power supplies are present the switch remains in theOFF condition and the switch inputs are high impedanceinputs. This ensures that no current flows that may damage theswitch. This is very useful in application where analog signalsmay be present at the switch inputs before power or where theuser has no control over the Power Supply Sequence.In the off condition, signal levels up to 16V are blocked. Also, ifthe analog input signal levels exceed VDD by VT then the switchwill turn off.The ultralow on resistance of these switches make them idealsolutions for data acquisition and gain switching applicationswhere low on resistance and distortion is critical. The onresistance profile is very flat over the full analog input rangeensuring excellent linearity and low distortion when switchingaudio signals.APPLICATIONS Hot swap applications Data acquisition systems Battery-powered systems Automatic test equipment Communication systems Relay ReplacementPRODUCT HIGHLIGHTS Power-Off Protection On Both S and D Pins. PSS Robustness. Overvoltage Protection up to 16 V. 5.2 Ω On Resistance. 16-Lead TSSOP and 3 mm × 3 mm LFCSP Packages.

The ADG4612 & ADG4613 contain four independent single-pole/single-throw (SPST) switches. The ADG4612 switches areturned on with Logic 1 on the appropriate control input. TheADG4613 has two switches with digital control logic similar tothat of the ADG4612; the logic is inverted on the other twoswitches. Each switch conducts equally well in both directionswhen on and has an input signal range that extends to thesupplies. The ADG4613 exhibits break-before-make switchingaction for use in multiplexer applications.When no power supplies are present the switch remains in theOFF condition and the switch inputs are high impedanceinputs. This ensures that no current flows that may damage theswitch. This is very useful in application where analog signalsmay be present at the switch inputs before power or where theuser has no control over the Power Supply Sequence.In the off condition, signal levels up to 16V are blocked. Also, ifthe analog input signal levels exceed VDD by VT then the switchwill turn off.The ultralow on resistance of these switches make them idealsolutions for data acquisition and gain switching applicationswhere low on resistance and distortion is critical. The onresistance profile is very flat over the full analog input rangeensuring excellent linearity and low distortion when switchingaudio signals.APPLICATIONS Hot swap applications Data acquisition systems Battery-powered systems Automatic test equipment Communication systems Relay ReplacementPRODUCT HIGHLIGHTS Power-Off Protection On Both S and D Pins. PSS Robustness. Overvoltage Protection up to 16 V. 5.2 Ω On Resistance. 16-Lead TSSOP and 3 mm × 3 mm LFCSP Packages.