The ADGS1208/ADGS1209 are analog multiplexers comprisingeight single channels and four differential channels, respectively. Aserial peripheral interface (SPI) controls the switches. The SPIinterface has robust error detection features, such as cyclicredundancy check (CRC) error detection, invalid read/writeaddress detection, and SCLK count error detection.It is possible to daisy-chain multiple ADGS1208/ADGS1209devices together. Daisy-chain mode enables the configuration ofmultiple devices with a minimal amount of digital lines. TheADGS1208/ADGS1209 can also operate in burst mode todecrease the time between SPI commands.iCMOS? construction ensures ultralow power dissipation,making the devices ideally suited for portable and batterypoweredinstruments.Each switch conducts equally well in both directions when on,and each switch has an input signal range that extends to thesupplies. In the off condition, signal levels up to the suppliesare blocked. The ultralow on capacitance (CON) and exceptionally low chargeinjection (QINJ) of these multiplexers make them ideal solutionsfor data acquisition and sample-and-hold applications, wherelow glitch and fast settling are required.Product Highlights SPI interface removes the need for parallel conversion, logic traces and reduces GPIO channel count. Daisy-chain mode removes additional logic traces when multiple devices are used. CRC error detection, invalid read/write address detection, and SCLK count error detection ensures a robust digital interface. CRC and Error detection capabilities allows for the use of the ADGS1208/ADGS1209 in safety critical systems.Applications Audio and video routing Automatic test equipment Data-acquisition systems Battery-powered systems Sample-and-hold systems Communication systems

The ADV3226/ADV3227 are high speed 16 ? 16 analog crosspoint switch matrices. They offer a ?3 dB signal bandwidth greater than 750 MHz and channel switch times of less than 20 ns with 1% settling.The ADV3226/ADV3227 include 16 independent output buffers that can be placed into a high impedance state for paralleling crosspoint outputs to prevent off channels from loading the output bus. The ADV3226 has a gain of +1 and the ADV3227 has a gain of +2. They both operate on voltage supplies of ?5 V while consuming only 118 mA (ADV3226) and 133 mA (ADV3227) of idle current. Channel switching is performed via a serial digital control that can accommodate daisy chaining of several devices or via a parallel control to allow updating of an individual output without reprogramming the entire array.The ADV3226/ADV3227 are available in the 100-lead LFCSP package over the extended industrial temperature range of ?40?C to +85?C.Applications Routing of high speed signals including ? ? Video (NTSC, PAL, S, SECAM, YUV, RGB) ? ? Compressed video (MPEG, wavelet) ? ? 3-level digital video (HDB3) Data communications Telecommunications

The ADN4600 is an asynchronous, nonblocking crosspoint switch with eight differential PECL-/CML-compatible inputs with programmable equalization and eight differential CML outputs with programmable output levels and pre-emphasis or de-emphasis. The operation of this device is optimized for NRZ data at rates up to 4.25 Gbps.The receive inputs provide programmable equalization with nine settings to compensate for up to 30 in. of FR4 and programmable pre-emphasis with seven settings to compensate for up to 30 in. of FR4 at 4.25 Gbps.The ADN4600 nonblocking switch core implements an 8 ? 8 crossbar and supports independent channel switching through the I2C control interface. Every channel implements an asynchronous path supporting NRZ data rates from dc to 4.25 Gbps. Each channel is fully independent of other channels. The ADN4600 has low latency and very low channel-to-channel skew.The main application for the ADN4600 is to support switching on the backplane, line card, or cable interface sides of serial links.The ADN4600 is packaged in a 9 mm ? 9 mm, 64-lead LFCSP package and operates from ?40?C to +85?C.APPLICATIONS 1?, 2?, 4? FibreChannel XAUI Gigabit Ethernet over backplane 10GBase-CX4 InfiniBand? 50 ? cables

DC858A: Demo Board for the LT6555 650MHz Gain of 2 Triple 2:1 Video Multiplexer.

RF Switch ICs GaAs MMIC SP4T Non-Reflective, DC-20

I2C CMOS 8 X 12 Analog Switch Array with Dual/Single Supplies Features: I2C compatible interface  3.4 MHz high speed I2C option 32-lead LFCSP_VQ  (5 mm × 5 mm) Double-buffered input logic  Simultaneous update of multiple switches Up to 300 MHz bandwidth Fully specified at dual ±5 V/single +12 V operation On resistance 35 Ω maximum Low quiescent current < 20 μA Qualified for automotive applications

0.5 Ω CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX Data Sheet  

High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers Features: Latch-up proof 2.9 pF off source capacitance 17 pF off drain capacitance 0.4 pC charge injection Low on resistance: 160 Ω typical ±9 V to ±22 V dual-supply operation 9 V to 40 V single-supply operation 48 V supply maximum ratings Fully specified at ±15 V, ±20 V, +12 V, and +36 V See data sheet for additional featuresADG5208-EP supports defense and aerospace applications (AQEC standard) Download ADG5208-EP data sheet (pdf) Military temperature range: –55°C to +125°C Controlled manufacturing baseline One assembly and test site One fabrication site Enhanced product change notification Qualification data available on request V62/15601 DSCC Drawing Number

CMOS Low Voltage 2.5 Quad SPST Switch Features: 1.8 V to 5.5 V Single Supply 2.5 O (Typ) On Resistance Low On-Resistance Flatness -3 dB Bandwidth >200 MHz Rail-to-Rail Operation 16-Lead TSSOP/SOIC packages Fast Switching Times  tON 16 ns tOFF 10 ns Typical Power Consumption (<0.01 µW ) TTL/CMOS Compatible

IC MUX 8CH SP JFET DIP16; Multiplexer Configuration:8:1; No. of Circuits:1Circuits; On State Resistance Max:300ohm; Supply Voltage Range:± 15V; Analogue Multiplexer Case:DIP; No. of Pins:16Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:MUX08 Series; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (20-Jun-2016); Analogue Multiplexer Type:8 Channel Single Pole; Analogue Switch Case Style:DIP; Base Number:8; IC Generic Number:08; Logic Function Number:8; No. of Channels:8Channels; On Resistance Rds(on):400ohm; Operating Temperature Range:-40°C to +85°C; Supply Current:15mA; Supply Voltage Source:Dual; Termination Type:Through Hole