SPI/Digital or I2C Module Isolator Features: 6-Channel Logic Isolator: 3500VRMS for 1 Minute UL-CSA Recognized File #E151738 3V to 5.5V Supply Operation No External Components Required SPI/Digital (LTM2892-S) or I2C (LTM2892-I) Options High Common Mode Transient Immunity: 50kV/μs High Speed Operation: 10MHz Digital Isolation 4MHz/8MHz SPI Isolation 400kHz I2C Isolation Operation Up to 125°C (H-Grade) 1.62V to 5.5V Logic Supplies for Flexible Digital Interfacing ±15kV ESD HBM Across the Isolation Barrier Maximum Continuous Working Voltage: 850VPEAK Low Current Shutdown Mode (<10μA) Small (9mm × 6.25mm × 2.91mm) BGA Package

Dual, Multiphase Current Mode Synchronous Controller for Sub-Milliohm DCR Sensing Features:Sub-Milliohm DCR Current SensingOperates with Power Blocks, DRMOS or External Gate Drivers and MOSFETsSupports Phase Shedding and N+1 Phase RedundancyProgrammable DCR Temperature Compensation±0.75% Maximum Total DC Output Error Over TemperatureDual Differential Remote Output Voltage Sense AmplifiersPhase-Lockable Fixed Frequency Range: 200kHz to 1.2MHzVIN Range: 4.5V to 38VVOUT Range: 0.6V to 3.5VSupports Smooth Start-Up into Pre-Biased OutputsProgrammable Soft-Start or VOUT TrackingHiccup Mode/Soft Recovery from Output Overcurrent36-Lead (5mm × 6mm) QFN Package

Multi-Phase Current Mode Step-Up DC/DC Controller Features: Wide VIN Range: 5.5V to 36V Operation 2-Phase Operation Reduces Input and Output Capacitance Fixed Frequency, Peak Current Mode Control Internal 10V LDO Regulator Lower UVLO Thresholds Allows the Use of MOSFETs Rated at 6V VGS Adjustable Slope Compensation Gain Adjustable Max Duty Cycle (Up to 96%) Adjustable Leading Edge Blanking ±1% Internal Voltage Reference Programmable Operating Frequency with One External Resistor (75kHz to 500kHz) Phase-Lockable Fixed Frequency 50kHz to 650kHz SYNC Input and CLKOUT for 2-, 3-, 4-, 6- or 12-Phase Operation (PHASEMODE Programmable) 24-Lead Narrow SSOP Package 5mm × 5mm QFN Package with 0.65mm Lead Pitch 24-Lead Thermally Enhanced TSSOP Package

42V, 6A Synchronous Step-Down Regulator with 3A Quiescent Current Features: Wide Input Voltage Range: 3.4V to 42V Ultralow Quiescent Current Burst Mode® Operation: 3μA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P High Efficiency Synchronous Operation: 95% Efficiency at 3A, 5VOUT from 12VIN 94% Efficiency at 3A, 3.3VOUT from 12VIN Fast Minimum Switch-On-Time: 40ns Low Dropout Under All Conditions: 250mV at 3A Allows Use Of Small Inductors Safely Tolerates Inductor Saturation in Overload Conditions Adjustable and Synchronizable: 200kHz to 2.2MHz Current Mode Operation Accurate 1V Enable Pin Threshold Internal Compensation Output Soft-Start and Tracking Small Thermally Enhanced 3mm × 6mm 28-Lead QFN Package AEC-Q100 Qualified for Automotive Applications

60VIN LED Converter with Internal PWM Generator Features: 3000:1 True Color PWM™ Dimming for LEDs Wide VIN Range: 4.5V to 60V Rail-to-Rail Current Sense Range: 0V to 80V Internal 80V/3.5A Switch Programmable PWM Dimming Signal Generator Constant Current (±3%) and Constant-Voltage (±2%) Regulation Accurate Analog Dimming Drives LEDs in Boost, SEPIC, CUK, Buck Mode, Buck-Boost Mode, or Flyback Configuration Output Short-Circuit Protected Boost Open LED Protection and Reporting Adjustable Switching Frequency: 100kHz to 1MHz Programmable VIN UVLO with Hysteresis C/10 Indication for Battery Chargers Low Shutdown Current: <1μA Thermally Enhanced 5mm × 6mm QFN Package

High Current Hot Swap Controller with I2C Compatible Monitoring Features: Allows Safe Board Insertion Into Live Backplane 12-/16-Bit ADC with ±0.9% Total Unadjusted Error Monitors Current, Voltage, Power and Energy Controls Two Parallel N-Channel MOSFETs for SOA Sharing in High Current Applications Internal EEPROM for Nonvolatile Configuration Wide Operating Voltage Range: 2.9V to 33V I2C/SMBus Digital Interface (Coexists with PMBus Devices) 12V Gate Drive for Lower MOSFET RDS(ON) Programmable Current Limit with 2% Accuracy MOSFET Power Limiting with Current Foldback Continuously Monitors MOSFET Health Stores Minimum and Maximum Measurements Alerts When Alarm Thresholds Exceeded Input Overvoltage and Undervoltage Protection Internal ±5% or External Timebases 32-Pin 5mm × 5mm QFN Package AEC-Q100 Qualified for Automotive Applications

8-Channel PMBus Power System Manager Featuring Accurate Output Voltage Measurement Features: Sequence, Trim, Margin and Supervise Eight Power Supplies Manage Faults, Monitor Telemetry and Create Fault Logs PMBus™ Compliant Command Set Supported by LTpowerPlay® GUI Margin or Trim Supplies to Within 0.25% of Target Fast OV/UV Supervisors Per Channel Coordinate Sequencing and Fault Management Across Multiple LTC PSM Devices Automatic Fault Logging to Internal EEPROM Operate Autonomously without Additional Software Internal Temperature and Input Voltage Supervisors Accurate Monitoring of Eight Output Voltages, Input Voltage and Internal Die Temperature I2C/SMBus Serial Interface Can Be Powered from 3.3V, or 4.5V to 15V Programmable Watchdog Timer 100% Pin-Compatible Upgrade to the LTC2978/LTC2978A Available in 64-Pin 9mm × 9mm QFN PackageAEC-Q100 Qualified for Automotive Applications

16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

Single Channel, 64-Position, Push-Button, 8% Resistor Tolerance, Nonvolatile Digital Potentiometer Features: Nominal resistor tolerance error: ±8% maximum Wiper current: ±6 mA Rheostat mode temperature coefficient: 35 ppm/°C Low power consumption: 2.5 μA max @ 2.7 V and 125°C Wide bandwidth: 4 MHz (5 kΩ option) Power-on EEPROM refresh time < 50 μs 50-year typical data retention at 125°C 1 million write cycles 2.3 V to 5.5 V supply operation Built-in adaptive debouncer Wide operating temperature: −40°C to +125°C Thin, 2 mm × 2 mm × 0.55 mm, 8-lead LFCSP package

Quad Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 4 mm × 4 mm package optionAD5144-EP Supports defense and aerospace applications (AQEC standard) Download AD5144-EP data sheet (PDF) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/20603