2 A, Low VIN, Low Noise, CMOS Linear Regulator Features: 2 A maximum output current Low input voltage supply range VIN = 1.10 V to 1.98 V, no external bias supply required Fixed output voltage range: VOUT_FIXED = 0.9 V to 1.5 V Adjustable output voltage range: VOUT_ADJ = 0.5 V to 1.5 V Ultralow noise: 2 μV rms, 100 Hz to 100 kHz Noise spectral density 4 nV/√Hz at 10 kHz 3 nV/√Hz at 100 kHz Low dropout voltage: 62 mV typical at 2 A load Operating supply current: 4.5 mA typical at no load ±1.5% fixed output voltage accuracy over line, load, and temperature Excellent power supply rejection ratio (PSRR) performance 62 dB typical at 10 kHz at 2 A load 46 dB typical at 100 kHz at 2 A load Excellent load/line transient response Soft start to reduce inrush current Optimized for small 10 μF ceramic capacitors Current-limit and thermal overload protection Power-good indicator Precision enable 16-lead, 3 mm × 3 mm LFCSP package AEC-Q100 qualified for automotive applications

Synchronous Current-Mode Buck Controller with Constant On-time, 0.8 V Reference Voltage, and Power Saving Mode Features: Power input voltage as low as 2.75 V to 20 V Bias supply voltage range: 2.75 V to 5.5 V Minimum output voltage: 0.6 V 0.8 V reference voltage with ±1.0% accuracy Supports all N-channel MOSFET power stages Available in 300 kHz, 600 KHz, and 1.0 MHz options No current-sense resistor required Power saving mode (PSM) for light loads (ADP1883 only) Resistor Programmable Current Sense Gain Thermal overload protection Short-circuit protection See data sheet for additional features

Buck or Boost, PWM Controller for Battery Test Solutions Features: Input voltage range: 6 V to 60 V On-board 5 V low dropout regulator Selective buck or boost mode Excellent PWM linearity with high amplitude PWM sawtooth 4.0 V p-p FAULT input compatible with AD8450 COMP input compatible with AD8450 Adjustable frequency from 50 kHz to 300 kHz Synchronization output or input with adjustable phase shift Programmable maximum duty cycle See datasheet for additional features

Configurable, Dual 2 A/Single 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Configurable 3 A/1 A or 2 A/2 A dual output load combinations or 4 A combined single output High efficiency: up to 95% Input voltage VIN: 2.75 V to 5.5 V Selectable fixed output: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V or adjustable output voltage to 0.6 V minimum ±1.5% accuracy reference voltage Selectable fixed switching frequency: 300 kHz, 600 kHz, or 1.2 MHz Optimized gate slew rate for reduced EMI External synchronization or internal clock output Dual-phase, 180° shifted PWM channels Current mode for fast transient response, no current sense resistor required Pulse-skip under light load or forced PWM operation See data sheet for additonal features

2A, 1.2MHz Synchronous Step-Down DC-to-DC Regulator Features: Continuous output current: 2A 145 mΩ and 70 mΩ integrated FET Input voltage range from 2.3 V to 5.5 V Output voltage from 0.6V to VIN Precision threshold enable input ±1.5% output accuracy Supported by ADIsimPower™ design tool See datasheet for additional features

20 V, 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Input voltage: 4.5 V to 20 V Integrated MOSFET: 44 m/11.6 m Reference voltage: 0.6 V ± 1% Continuous output current: 4 A 180° out of phase clock synchronizationSynchronizes to external clock: 200 kHz to 1.4 MHz Programmable switching frequency: 200 kHz to 1.4 MHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

20 V, 6 A, Synchronous Step-Down DC-to-DC Regulator Features: Input voltage: 4.5 V to 20 V Integrated MOSFET: 44 m/11 m Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable switching frequency: 200 kHz to 1.4 MHz Synchronizes to external clock: 200 kHz to 1.4 MHz 180° out of phase clock synchronization Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

20 V, 6 A, Synchronous, Step-Down DC-to-DC Regulator Features: Input voltage range: 4.5 V to 20 V Integrated MOSFET: 44 mΩ typical/11 mΩ typical Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable current-limit thresholdProgrammable switching frequency: 200 kHz to 1400 kHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

18 V, 12 A Step-Down Regulator with Programmable Current Limit Features: Input voltage: 4.5 V to 18 V Continuous output current: 12 A Integrated MOSFETs: 17 mΩ high-side/4.5 mΩ low-side 0.6 V ± 0.5% reference voltage Programmable switching frequency range: 200 kHz to 2200 kHz Enhanced transient response Programmable current limit with ±10% accuracy Precision enable and power good External compensation and soft start Start up into a precharged output Supported by the ADIsimPower design tool

3 A, 36 V, Synchronous Step-Down DC-to-DC Regulator Features: Continuous output current: 3 A Input voltage: 4.5 V to 36 V Integrated MOSFETs: 98 mΩ/35 mΩ Reference voltage: 0.6 V ± 1% Fast minimum on time: 50 ns Programmable switching frequency: 200 kHz to 1.8 MHz Synchronizes to external clock: 200 kHz to 1.8 MHz Precision enable and power good Cycle-by-cycle current limit with hiccup protection External compensation Programmable soft start time Startup into a precharged output Supported by ADIsimPower design tool