Complete Isolated RS485/RS422 Module Transceiver + Power Features: RS485/RS422 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 20Mbps or Low EMI 250kbps Data Rate High ESD: ±15kV HBM on Transceiver Interface High Common Mode Transient Immunity: 30kV/μs Integrated Selectable 120Ω Termination 3.3V (LTM2881-3) or 5.0V (LTM2881-5) Operation 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface Maximum Continuous Working Voltage: 560VPEAK High Input Impedance Failsafe RS485 Receiver Current Limited Drivers and Thermal Shutdown Compatible with TIA/EIA-485-A and PROFIBUS High Impedance Output During Internal Fault Condition Low Current Shutdown Mode (< 10μA) General Purpose CMOS Isolated Channel 15mm × 11.25mm BGA and LGA Packages

Low IQ, Dual 2-Phase Synchronous Step-Down Controller Features: Low Operating IQ: 170μA (One Channel On) Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 24V Wide VIN Range: 4V to 38V RSENSE or DCR Current Sensing Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise OPTI-LOOP® Compensation Minimizes COUT Phase-Lockable Frequency (75kHz-850kHz) Programmable Fixed Frequency (50kHz-900kHz) Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start Power Good Output Voltage Monitor Output Overvoltage Protection Output Latch-Off Protection During Short Circuit Low Shutdown IQ: 8μA Internal LDO Powers Gate Drive from VIN or EXTVCC No Current Foldback During Start-Up Small 5mm × 5mm QFN Package

High Efficiency, Synchronous, 4-Switch Buck-Boost Controller Features: Single Inductor Architecture Allows VIN Above, Below or Equal to the Regulated VOUT Programmable Input or Output Current Wide VIN Range: 4V to 38V 1% Output Voltage Accuracy: 0.8V < VOUT < 38V Synchronous Rectification: Up to 98% Efficiency Current Mode Control Phase-Lockable Fixed Frequency: 200kHz to 600kHz No Reverse Current During Start-Up Power Good Output Voltage Monitor Internal 5.5V LDO Quad N-Channel MOSFET Synchronous Drive VOUT Disconnected from VIN During Shutdown True Soft-Start and VOUT Short Protection, Even in Boost Mode Available in 28-Lead QFN (4mm × 5mm) and 28-Lead SSOP Packages

Octal 12-/10-/8-Bit I2C VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference: 2.5V Full-Scale 10ppm/°C (LTC2637-L) 4.096V Full-Scale 10ppm/°C (LTC2637-H) Maximum INL Error: 2.5LSB (LTC2637-12) Low Noise: 0.75mVP-P 0.1Hz to 200KHz Guaranteed Monotonic Over –40°C to 125°C Temperature Range Selectable Internal or External Reference 2.7V to 5.5V Supply Range (LTC2637-L) Ultralow Crosstalk Between DACs (<3nV•s) Low Power: 100μA per DAC at 3V (LTC2637-L) Power-On-Reset to Zero-Scale/Mid-Scale Double-Buffered Data Latches Tiny 14-Lead 4mm × 3mm DFN and 16-Lead MSOP Packages

Monolithic Dual Tracking 3A Step-Down Switching Regulator Features: Wide Input Range: – Operation from 3V to 60V Independent Supply, Shutdown, Soft-Start, UVLO, Programmable Current Limit and Programmable Power Good for Each 3A Regulator Die Temperature Monitor Adjustable/Synchronizable Fixed Frequency Operation from 250kHz to 2MHz with Synchronized Clock Output Independent Synchronized Switching Frequencies Optimize Component Size Antiphase Switching Outputs Can Be Paralleled Flexible Output Voltage Tracking Low Dropout: 95% Maximum Duty Cycle 5mm × 5mm QFN Package FMEA Compliant 38-Pin Exposed Pad TSSOP Package

Low Noise Single-Ended to Differential Converter/ADC Driver Features: Rail-to-Rail Input and Outputs Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step 1.9nV/√Hz Input-Referred Op Amp Noise High Impedance Input –3dB Bandwidth: 33MHz 2.7V to 12V Supply Operation No External Gain Resistors Required 4.8mA Supply Current Low Power Shutdown Low Distortion (HD2/HD3): –102dBc/–97dBc at 100kHz, VOUTDIFF = 4VP-P Low Offset Voltage: ±400μV Max High DC Linearity: <±1LSB, 16-Bit, 8VP-P Low Input Current Noise: 1.1pA/√Hz 3mm × 3mm 8-Pin DFN and 8-Lead MSOP Packages

Micropower USB Power Manager With Li-Ion Charger, LDO and Buck Regulator Features: 12μA Standby Mode Quiescent Current (All Outputs On) Seamless Transition Between Input Power Sources: Li-Ion/Polymer Battery and USB 240mΩ Internal Ideal Diode Provides Low Loss PowerPath™ High Efficiency 200mA Buck Regulator 150mA Low Dropout (LDO) Linear Regulator Pushbutton On/Off Control With System Reset Full Featured Li-Ion/Polymer Battery Charger Programmable Charge Current With Thermal Limiting Instant-On Operation With Discharged Battery 3mm × 3mm × 0.75mm 20-Pin QFN Package

Dual Isolated RS232 Module Transceiver + Power Features: RS232 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 1.62V to 5.5V Logic Supply for Flexible Digital Interfacing High Speed Operation 1Mbps for 250pF/3kΩ Load 250kbps for 1nF/3kΩ Load 100kbps for 2.5nF/3kΩ TIA/EIA-232-F Load 3.3V (LTM2882-3) or 5V (LTM2882-5) Operation No Damage or Latchup to ±10kV HBM ESD on Isolated RS232 Interface or Across Isolation Barrier High Common Mode Transient Immunity: 30kV/μs Maximum Continuous Working Voltage: 560VPEAK True RS232 Compliant Output Levels 15mm × 11.25mm BGA and LGA Packages

16-Channel 50mA LED Driver with Buck Controller Features: 6V to 55V Power Input Voltage Range 16 Independent LED Outputs Up to 75mA/36V ±3% LED Current Matching at 50mA (Typ ±1%) 6-Bit Dot Correction Current Adjustment 12-Bit Grayscale PWM Dimming 0.5μs Minimum LED On-Time Adaptive LED Bus Voltage for High Efficiency Cascadable 30MHz Serial Data Interface Full Diagnostic and Protection: Individual Open/Short LED and Overtemperature Fault 40-Lead 6mm × 6mm QFN Package

Dual Ideal Diode and Single Hot Swap Controller Features: Power Path and Inrush Current Control for Redundant Supplies Low Loss Replacement for Power Schottky Diodes Allows Safe Hot Swapping from a Live Backplane 2.9V to 18V Operating Range Controls N-Channel MOSFETs Limits Peak Fault Current in ≤1μs 0.5μs Ideal Diode Turn-On and Reverse Turn-Off Time Adjustable Current Limit with Circuit Breaker Smooth Switchover without Oscillation Adjustable Current Limit Fault Delay Fault and Power Status Output 20-Lead 4mm × 5mm QFN and 16-Lead SSOP Packages