Single-/Dual-Supply, High Voltage Isolated IGBT Gate Driver Features: 4 A peak drive output capability Output power device resistance < 1Ω Desaturation protection Isolated Fault output Soft Shutdown on Fault Isolated Fault and Ready functions Low propagation delay 55 ns typical Minimum pulse width: 50 ns Operating temperature range: −40°C to +125°C Output voltage range to 35 V See data sheet for additional features

11 A High Voltage Isolated Bipolar Gate Driver with Fault Detection, Miller Clamp Features: 11 A short-circuit source current (0 Ω gate resistance) 9 A short-circuit sink current (0 Ω gate resistance) 4.61 A peak current (2 Ω gate resistance) Output power device resistance: <1 Ω Output voltage range up to 30 V Multiple UVLO options on VDD2 Grade A: 14.5 V (typical) UVLO on VDD2 positive going threshold Grade B and Grade C: 11.5 V (typical) UVLO on VDD2 positive going threshold VDD1 input voltage range from 2.5 V to 6 V Desaturation protection Soft shutdown on desaturation fault Multiple desaturation detect comparator voltages Grade B: 9.2 V (typical) Grade A and Grade C: 3.5 V (typical) Miller clamp output with gate sense input Isolated fault and ready functions Low propagation delay: 75 ns (typical) Operating temperature range: −40°C to +125°C Creepage distance: 8.3 mm minimum CMTI: 100 kV/μs Safety and regulatory approvals (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-11 VIORM = 2150 V peak

2, 31.76 W, Digital Input, Filterless Stereo Class D Audio Amplifier Features: Digital input stereo, high efficiency Class-D amplifier Operates from a single 4.5 V to 16.5 V supply State-of-the-art, proprietary, filterless - modulation 106.5 dB SNR at PO = 8.1 W, RL = 8 , AV = 19 dB, PVDD = 12 V, A weighted 0.004% THD + N at 5 W into 8 38.5 V rms output voltage noise, f = 20 Hz to 20 kHz, A weighted, PVDD = 16 V, 8 Pop and clickless on and off sequence 2 14.67 W output at 12 V supply to 4 loads at <1% THD + N 2 14.4 W output at 16 V supply to 8 loads at <1% THD + N Mono mode for increased maximum output power 1 49.69 W output at 16 V supply to 2 loads at <1% THD + N Support for low impedance loads As low as 3 Ω/5 μH in stereo mode As low as 2 Ω/5 μH in mono mode High power efficiency 93.8% efficiency into an 8 Ω load 90.6% efficiency into a 4 Ω load 12.34 mA quiescent current with single 12 V PVDD supply Single-supply operation with internal LDOs or option to use an external 5 V and 1.8 V supply for lowest power consumption I2C control and hardware modes with up to 16 pin-selectable slots/addresses Supported sample rates from 8 kHz to 192 kHz with 24-bit resolution Multiple PCM audio serial data formats TDM slave with support for up to 16 devices on a single bus I2S or left justified slave Adjustable full-scale output tailored for many PVDD sources 2- and 3-cell Li-Ion batteries Digital volume control with selectable smooth ramp Automatic power-down function Supply monitoring automatic gain control (AGC) function reduces system brownout Standalone operational mode without I2C Temperature sensor with 1°C step readout via I2C Short-circuit, undervoltage, and thermal protection Thermal early warning Power-on reset PVDD sensing ADC 40-lead, 6 mm × 6 mm LFCSP with thermal pad

RapID Platform Generation 2 (RPG2) Network Interface Features: Configurable industrial protocol support PROFINET RT (Class B) PROFINET IRT (Class C): coming soon EtherNet/IP with DLR EtherCAT All protocols precertified Configurable applications processor interface UART: 115,200 bps to 1,000,000 bps Ethernet at 10 Mbps or 100 Mbps SPI follower: 10 MHz maximum clock I2C, QSPI, and CAN: future option Industrial Ethernet interface-compliant to IEEE 802.3, 10Base or 100Base transmit half and full duplex Single 3.3 V power supply, 840 mW Cycle time down to 1 ms (cycle times vary based on protocol, link type, and application data) 194-ball chip-scale package BGA form factor RoHS 3 compliant –40°C to +85°C industrial temperature range

RapID Platform Generation 2 (RPG2) Network Interface Features: Configurable industrial protocol support PROFINET RT (Class B) PROFINET IRT (Class C): coming soon EtherNet/IP with DLR EtherCAT All protocols precertified Configurable applications processor interface UART: 115,200 bps to 1,000,000 bps Ethernet at 10 Mbps or 100 Mbps SPI follower: 10 MHz maximum clock I2C, QSPI, and CAN: future option Industrial Ethernet interface-compliant to IEEE 802.3, 10Base or 100Base transmit half and full duplex Single 3.3 V power supply, 840 mW Cycle time down to 1 ms (cycle times vary based on protocol, link type, and application data) 194-ball chip-scale package BGA form factor RoHS 3 compliant –40°C to +85°C industrial temperature range

Up to 1 GHz Dual-SHARC+ DSP w/ Integrated Arm Cortex-A5 Features:SHARC+ Core Infrastructure 800 MHz (max) or 1 GHz (max) Core clock frequency 2x 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedArm Core Infrastructure: 1 GHz Arm Cortex-A5 (with Neon/FPU) 32 kByte/32 kByte L1 Instr./Data Cache 256 kByte L2 CacheMemory 2048 KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices)16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 8x Precision Clock Generators 2x 4-channel PDM Mic Inputs 40 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin / 6-pin 6x I2C,3x UARTs 2x Link Ports 16x General Purpose Timer, 1x General Purpose Counter 3x Watchdog Timers ePPI USB 2.0 HS OTG Controller 10/100 EMAC 10/100/1000 EMAC w/AVB and 1588 2x CAN FD 8-ch 12bit Housekeeping ADC 135 GPIO pins, 40 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball FCBGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

67 dB SMT SDLVA, 0.5 - 18.5 GHz Features: High Logging Range: 67 dB (-62 to +5 dBm) Output Frequency Flatness: ±2 dB Log Linearity: ±2 dB Fast Rise/Fall Times: 5/15 ns Single Positive Supply: +3.3V ESD Sensitivity (HBM): Class 1A 24 Lead 4x4mm SMT Package: 16mm2

GaAs MMIC SP4T Reflective Switch, 23 - 30 GHz Features: Broadband Performance: 23 - 30 GHz High Isolation: 26 dB Insertion Loss: 2.8 dB High Power Handling: >27 dBm 24 Lead 4 × 4mm SMT Package: 16mm2

GaAs MMIC SP4T Reflective Switch, 23 - 30 GHz Features: Broadband Performance: 23 - 30 GHz High Isolation: 26 dB Insertion Loss: 2.8 dB High Power Handling: >27 dBm 24 Lead 4 × 4mm SMT Package: 16mm2

GaAs MMIC SP4T Reflective Switch, 23 - 30 GHz Features: Broadband Performance: 23 - 30 GHz High Isolation: 26 dB Insertion Loss: 2.8 dB High Power Handling: >27 dBm 24 Lead 4 × 4mm SMT Package: 16mm2