Digital Isolators Digital Quad-CH

Analogue Switch ICs 1.8V to 5.5V 2:1 Mux/SPDT Switch I.C.

Power Management IC Development Tools LTC3129-1 Demo Board 2.42V to 15V Input to 5V out at 200mA.

Digital Potentiometer ICs 7-BIT RDAC WITH UP/DWN CONTROL

Tiny 16-Bit SPI nanoDAC+, with 2 (16-Bit) LSB INL and 2 ppm/C Reference Features: Ultrasmall package: 2 mm × 2 mm, 8-lead LFCSP High relative accuracy (INL): ±2 LSB maximum at 16 bits AD5683R/AD5682R/AD5681R Low drift, 2.5 V reference: 2 ppm/°C typical Selectable span output: 2.5 V or 5 V Total unadjusted error (TUE): 0.06% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.05% of FSR maximum Low glitch: 0.1 nV-sec High drive capability: 20 mA Low power: 1.2 mW at 3.3 V Independent logic supply: 1.62 V logic compatible Wide operating temperature range: −40°C to +105°C Robust 4 kV HBM ESD protection

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Output voltage range: 1.2 V to 3.4 V Maximum load current: 600 mA Low noise 0.9 μV rms total integrated noise from 100 Hz to 100 kHz 1.6 μV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR: >90 dB from 200 Hz to 200 kHz; 57 dB at 1 MHz Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0% (minimum), +1.5% (maximum) Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 μF ceramic output capacitor 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

Precision Amplifiers Aual 1 A CMOS OpAmp

2.7 V to 5.5 V, 140 A, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages Features: Micropower: 140 µA @ 5 V, 115 µA @ 3 V Power-Down to 200 nA @ 5 V, 50 nA @ 3 V Guaranteed Monotonic by design Power-On-Reset to Zero Volts Three Power-Down Functions SYNC (active low) Interrupt Facility Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Buffer Amplifier with Rail-to-Rail Operation Temperature Range: -40°C to 105°C Three Power-Down Functions

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Ultrafast 3.3 V Single-Supply Comparator w/Reduced Swing PECL (RSPECL) Output Drivers Features: 3.3 V/5.2 V single-supply operation 150 ps propagation delay 15 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 80 ps minimum pulse width 35 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) On-chip terminations at both input pins Robust inputs with no output phase reversal Resistor-programmable hysteresis Differential latch control Extended industrial −40°C to +125°C temperature range