16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

256 Position SPI/I2C Selectable Digital Potentiometer Features: 256-position End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Compact MSOP-10 (3 mm × 4.9 mm) package Pin selectable SPI/I2C compatible interface Extra package address decode pin AD0 Full read/write of wiper register Power-on preset to midscale Single supply 2.7 V to 5.5 V Low temperature coefficient 45 ppm/°C Low power, IDD = 8 μA Wide operating temperature −40°C to +125°C SDO output allows multiple device daisy-chaining Evaluation board available

RF Amplifier GaAs HEMT WBand lo Noise amp, 24-40 GHz

RF Amplifier Analog Variable Gain amp SMT 17-27 GHz

Data Conversion IC Development Tools USB Data Acquisition Controller, for PSc

Compact, 800 mA, 3 MHz, Step-Down DC-to-DC Converter Features: Input voltage: 2.3 V to 5.5 V Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 24 μA Very small solution size 6-lead, 1 mm × 1.5 mm WLCSP package Fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier, compensation, and soft start Current overload and thermal shutdown protections Ultralow shutdown current: 0.2 μA (typical) Forced PWM and automatic PWM/PSM modes Supported by ADIsimPower™ design tool

ADC 12BIT 1MSPS SOT-23-6; Resolution (Bits):12bit; Sampling Rate:1MSPS; Supply Voltage Type:Single; Supply Voltage Min:2.7V; Supply Voltage Max:5.25V; ADC / DAC Case Style:SOT-23; No. of Pins:6Pins; Input Channel Type:Single Ended; Data Interface:SPI; Operating Temperature Min:-55°C; Operating Temperature Max:125°C; Packaging:Cut Tape; Product Range:Single 12-Bit SAR ADCs; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Supply Current:2mA

IC TXRX ISO RS-485 16SOIC; Device Type:RS485 Transceiver; IC Interface Type:RS422 RS485; No. of Drivers:1Drivers; No. of Receivers:1Receivers; Supply Voltage Min:3V; Supply Voltage Max:5.5V; Driver Case Style:WSOIC; No. of Pins:16Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:ADM2491E Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; IC Generic Number:ADM2491E; SVHC:No SVHC (20-Jun-2016)

Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter

256-/1024-Position, Digital Potentiometers with Maximum 1% R-Tolerance Error and 20-TP Memory Features: Single-channel, 256-/1024-position resolution 20 kΩ, 50 kΩ, and 100 kΩ nominal resistance Maximum ±1% nominal resistor tolerance error (resistor performance mode) 20-times programmable wiper memory Rheostat mode temperature coefficient: 35 ppm/°C Voltage divider temperature coefficient: 5 ppm/°C +9 V to +33 V single-supply operation ±9 V to ±16.5 V dual-supply operation SPI-compatible serial interface Wiper setting readback Power-on refreshed from 20-TP memoryAD5292-EP: Supports defense and aerospace applications (AQEC) Download AD5292-EP Data Sheet (pdf) Temperature range:  −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12616 DSCC Drawing Number