3V/5V, 1mW, 3-Channel Pseudo Differential, 16-Bit Sigma-Delta ADC Features: Three Pseudo Differential Input Channel ADCs 16 Bits No Missing Codes 0.003% Nonlinearity Programmable Gain Front End Gains from 1 to 128 Three-Wire Serial Interface SPI®, QSPI™, MICROWIRE™ and DSP Compatible Schmitt Trigger Input on SCLK See data sheet for additional features

24-bit, 2 Channel Capacitance to Digital Converter Features:New standard in single chip solutions Interfaces to single or differential floating sensors Resolution down to 4 aF (that is, up to 21 ENOB) Accuracy: 4 fF Linearity: 0.01% Common-mode (not changing) capacitance up to 17 pF Full-scale (changing) capacitance range: 4 pF Tolerant of parasitic capacitance to ground up to 60 pF Update rate: 10 Hz to 90 Hz Simultaneous 50 Hz and 60 Hz rejection at 16 Hz Temperature sensor on-chip Resolution: 0.1C, accuracy: 2C Voltage input channel Internal clock oscillator 2-wire serial interface (I2C-compatible) Power 2.7 V to 5.25 V single-supply operation 0.7 mA current consumption Operating temperature: 40C to +125C 16-lead TSSOP package

3-Channel, Low Noise, Low Power, 16-Bit, Sigma Delta ADC with On-Chip In-Amp Features: RMSnoise:  27 nV at 4.17 Hz (AD7799)  65 nV at 16.7 Hz (AD7799)  40 nV at 4.17 Hz (AD7798)  85 nV at 16.7 Hz (AD7798) Current: 380 μA typical Power-down: 1 μA maximum Low noise, programmable gain, instrumentation amp Internal clock oscillator Simultaneous 50 Hz/60 Hz rejection Reference detect Low-side power switch Programmable digital outputs Burnout currents Power supply: 2.7 V to 5.25 V Update rate: 4.17 Hz to 470 Hz 3 differential inputs

14-Bit, 250 kSPS PulSAR, Pseudo Differential ADC in MSOP/LFCSP Features: 14-bit resolution with no missing codes Throughput: 250 kSPS INL: ±0.4 LSB typical, ±1 LSB maximum (±0.0061% of FSR) SINAD: 85 dB @ 20 kHz THD: −100 dB @ 20 kHz Pseudo differential analog input range 0 V to VREF with VREF up to VDD No pipeline delay See Data Sheet for Additional Information

Bridge Sensor Signal Conditioner IC with LIN Interface, Nonlinearity Correction, Temperature Compensation Features:LIN 2.1 compliant interface (bridge sensor signal, temperature)Digitally programmable gain and offset voltage adjustmentGain range from 2.94 V/V to 971.10 V/VSensor temperature compensation (first- or second-order)Sensor nonlinearity correction (first- or second-order)Internal or external temperature sensor compensationEEPROM nonvolatile memory for calibration dataHigh system accuracy: 0.1% FSR over temperatureEMC and EMI protectionFault protection for open circuits and short circuits4 mm 4 mm, 20-lead LFCSP6 V to 18 V supply operation40C to +150C operating temperature rangeAEC-Q100 qualified for automotive applications

16-Bit, 15 MSPS, Module Data Acquisition Solution Features: Integrated fully differential ADC driver with signal scaling Wide input common range High common-mode rejection Single-ended to differential conversion 2.048 V input range with 4.096 V REFBUF Critical passive components 0.005% precision matched resistor array for FDA 9 mm × 9 mm, 0.8 mm pitch, 100-ball BGA package 4× footprint reduction versus discrete solution Low power, dynamic power scaling, power-down mode 143 mW typical at 15 MSPS Throughput: 15 MSPS, no pipeline delay INL: 0.4 LSB typical, 1 LSB maximum SINAD: 89 dB typical at 1 kHz THD: 115 dB at 1 kHz, 106 dB at 400 kHz Gain error: 0.005% FS typical Gain error drift: 1 ppm/C maximum On-board reference buffer with VCMO generation Serial LVDS interface Wide operating temperature range: 40C to +85C

18-Bit, 15 MSPS, Module Data Acquisition Solution Features: Integrated fully differential ADC driver with signal scaling Wide input common-mode voltage range High common-mode rejection Single-ended to differential conversion Pin selectable input range with overrange Input ranges with 4.096 V REFBUF: ±10 V, ±5 V, ±4.096 V, ±2.5 V, and ±1.5 V Gain/attenuation options: 0.37, 0.73, 0.87, 1.38, and 2.25 Critical passive components 0.005% precision matched resistor array for FDA 9 mm × 9 mm, 0.8 mm pitch, 100-ball CSP_BGA package 2.5× footprint reduction vs. discrete solution Low power, dynamic power scaling, power-down mode 143 mW typical at 15 MSPS Throughput: 15 MSPS, no pipeline delay INL error: ±3.1 ppm typical, ±6.2 ppm maximum (Gain = 0.73, gain = 0.87, gain = 1.38, gain = 2.25) SINAD: 90.4 dB typical at 20 kHz (gain = 0.73) THD: −117 dB at 1 kHz, −110 dB at 100 kHz (gain = 0.73) Gain error: ±0.005%FS typical Gain error drift: ±0.13 ppm/°C typical On-board reference buffer with VCMO generation Serial LVDS interface Wide operating temperature range: −40°C to +85°C

Three ADCs, One DAC, Low Power Codec with Audio DSPs Features: Programmable FastDSP audio processing engine Up to 768 kHz sample rate Biquad filters, limiters, volume controls, mixing Tensilica HiFi 3z DSP core Quad MAC per cycle: 24 x 24-bit multiplier and 64-bit accumulator Flexible power operation mode: 24.576 MHz, 49.152 MHz, 73.728 MHz, and 98.304 MHz 336 kB total memory JTAG debug and trace Low latency, 24-bit ADCs and DAC 106 dB SNR (signal through ADC with A-weighted filter) 110 dB combined SNR (signal through DAC and headphone with A-weighted filter) Programmable double precision MAC engine for maximum 24-stage equalizer Serial port sample rates from 8 kHz to 768 kHz 5 μs group delay (fS = 768 kHz) analog in to analog out with FastDSP bypass (zero instructions) 3 differential or single-ended analog inputs, configurable as microphone or line inputs 8 digital microphone inputs Analog differential audio output, configurable as either line output or headphone drive 2 PDM output channels PLL supporting any input clock rate from 30 kHz to 36 MHz 4 channel asynchronous sample rate converters (ASRCs) 2, 16-channel serial audio ports supporting I2S, left justified, right justified, or up to TDM16 (TDM12 in Turbo mode) 8 interpolators and 8 decimators with flexible routing Power supplies Analog AVDD at 1.8 V typical Digital I/O IOVDD at 1.1 V to 1.98 V Digital DVDD at 0.85 V to 1.21 V Headphone HPVDD at 1.8 V typical Headphone HPVDD_L at 1.2 V to HPVDD Control/communication interfaces I2C, SPI, or UART control ports Master quad SPI (QSPI) UART communication port Self-boot from QSPI flash Flexible GPIO and IRQ 56-ball, 0.35 mm pitch, 2.980 mm × 2.679 mm WLCSP

8 Channel, PDM to I2S/TDM Converter Features: 8 channels of PDM audio inputs from digital microphones 16×, 32×, or 64× decimation ratio of PDM to PCM audio data 24-bit resolution to support high sound pressure level (SPL) microphones 126 dB A-weighted SNR 4 kHz to 192 kHz output sampling rate Bit clock rates of 64×, 128×, 192×, 256×, 384×, or 512× the output sampling rate Dual output PDM clocks Automatic PDM clock generation Automatic power-down when BCLK removed Selectable I2C control or hardware mode operation 1.2 mA DVDD operating current for 8 channels at 48 kHz frequency sampling rate and 1.8 V supply Slave I2S or TDM output interface Up to TDM-16 supported Configurable TDM slot routing and sizes I/O supply voltage from 1.70 V to 3.63 V DVDD supply voltage from 1.10 V to 1.98 V <5 μA typical DVDD shutdown current 16-lead, 3 mm × 3 mm, 0.50 mm pitch LFCSP Power-on reset

18-Cell Battery Monitor with Daisy Chain Interface Features: Measures up to 18 battery cells in series 3 mV maximum total measurement error Stackable architecture for high voltage systems Built-in isoSPI interface 1 Mb isolated serial communications Uses a single twisted pair, up to 100 meters Low EMI susceptibility and emissions Bidirectional for broken wire protection 290 μs to measure all cells in a system Synchronized voltage and current measurement 16-bit Δ-Σ ADC with programmable third-order noise filter Passive cell balancing up to 200 mA (maximum) with programmable pulsewidth modulation 9 general purpose digital I/O or analog inputs Temperature or other sensor inputs Configurable as an I2C or SPI master 6 μA sleep mode supply current 64-lead LQFP_EP package