20 Gbps Clocked Comparator with RSPECL Output Stage Features: Propagation Delay Clock to Output: 120 ps Overdrive & Slew Rate Dispersion: 10 ps Minimum Pulse Width: 60 ps Resistor Programmable Hysteresis Differential Clock Control Input Bandwidth: 10 GHz Power Dissipation: 150 mW RSCML & RSECL Versions Available 16 Lead 3×3mm SMT Package: 9mm2

9 GHz to 12 GHz, GaAs, MMIC, I/Q Downconverter Features: Conversion gain: 11 dB (typical) at IFOUT = 100 MHz Image rejection: 25 dB (typical) at IFOUT = 100 MHz LO to RF isolation: 46 dB (typical) LO to IF isolation: 26 dB (typical) IF output frequency: dc to 3.5 GHz 32-lead, 4.9 mm × 4.9 mm ceramic leadless chip carrier

5.6 GHz to 8.6 GHz, GaAs, MMIC, I/Q Downconverter Features: Conversion gain: 13 dB typical Image rejection: 32 dBc typical Input P1dB compression: −6 dBm typical Input IP3: 3 dBm typical, 6.0 GHz to 8.6 GHz Noise figure: 2 dB typical LO to RF isolation: 48 dBm typical LO to IF isolation: 13 dBm typical RF to IF isolation: 10 dBm typical Amplitude balance: 0.2 dB typical Phase balance: −2° typical RF return loss: 10 dB typical LO return loss: 15 dB typical IF return loss: 15 dB typical Exposed paddle, 4 mm × 4 mm, 24-lead, LFCSP

5.6 GHz to 8.6 GHz, GaAs, MMIC, I/Q Downconverter Features: Conversion gain: 13 dB typical Image rejection: 32 dBc typical Input P1dB compression: −6 dBm typical Input IP3: 3 dBm typical, 6.0 GHz to 8.6 GHz Noise figure: 2 dB typical LO to RF isolation: 48 dBm typical LO to IF isolation: 13 dBm typical RF to IF isolation: 10 dBm typical Amplitude balance: 0.2 dB typical Phase balance: −2° typical RF return loss: 10 dB typical LO return loss: 15 dB typical IF return loss: 15 dB typical Exposed paddle, 4 mm × 4 mm, 24-lead, LFCSP

Analog Variable Gain Amplifier SMT, 5 - 12 GHz Features: Wide Gain Control Range: 22 dB Single Control Voltage: -1 to -4.5V Output IP3 @ Max Gain: +34 dBm Output P1dB: +22 dBm No External Matching 24 Lead 4x4 mm SMT Package: 16 mm²

2.5V to 5.5V, 115A Parallel Interface Single Voltage Output 10-Bit DAC Features: Single 10-Bit DAC in 20-Lead TSSOP Low power operation: 115 μA @ 3 V, 140 μA @ 5 V Power-down to 80 nA @ 3 V, 200 nA @ 5 V via PD Pin 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Double-Buffered Input Logic Buffered/unbuffered reference input options See Data Sheet for Additional Information

Dual 10-Bit nanoDAC with 2 ppm/C Reference, I2C Interface Features: Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface See data sheet for additional features

2.5 V to 5.5 V, 250 A, 2-Wire Interface, Dual Voltage Output,12-Bit DACs Features: AD5337: 2 buffered 8-bit DACs in 8-lead MSOP AD5338, AD5338-1: 2 buffered 10-bit DACs in 8-lead MSOP AD5339: 2 buffered 12-bit DACs in 8-lead MSOP Low power operation: 250 μA @ 3 V, 300 μA @ 5 V 2-wire (I2C-compatible) serial interface 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes See datasheet for additional features

2.5 V to 5.5 V, 230 A, Dual Rail-to-Rail Voltage Output 12-Bit DAC Features: AD5313: 2 buffered 10-bit DACs in 1 package A version: ±4 LSB INL B version: ±2 LSB INL AD5323: 2 buffered 12-bit DACs in 1 package A version: ±16 LSB INL  B version: ±8 LSB INL 16-lead TSSOP package Power-down to 200 nA @ 5 V, 50 nA @ 3 V Micropower operation: 300 μA at 5 V (including reference current) 2.5 V to 5.5 V power supply Double-buffered input logic Guaranteed monotonic by design over all codes Buffered/unbuffered reference input options Output range: 0 V to VREF or 0 V to 2 VREF Power-on-reset to 0 V

2GHz Low Noise Differential 16-Bit ADC Buffer Features: 2GHz –3dB Small Signal Bandwidth 300MHz ±0.1dB Bandwidth 1.8nV/√Hz Output Noise 46.25dBm Equivalent OIP3 at 140MHz 40.25dBm Equivalent OIP3 Up to 300MHz –81dBc/–72dBc HD2/HD3 at 140MHz, 2VP-P Out –84.5dBc IM3 at 140MHz, 2VP-P Out Composite –74dBc/–67.5dBc HD2/HD3 at 300MHz, 2VP-P Out –72.5dBc IM3 at 300MHz, 2VP-P Out Composite Programmable High Speed, Fast Recovery Output Clamping DC-Coupled Signal Path Operates on Single 2.7V to 3.9V Supply Low Power: 150mW on 3.6V 2mm × 3mm 10-Pin DFN Package