Single Supply, Low Power, Triple Video Amplifier Features: Three Video Amplifiers in One Package Drives Large Capacitive Load Excellent Video Specifications (RL = 150 ) Gain Flatness 0.1 dB to 60 MHz 0.02% Differential Gain Error 0.06° Differential Phase Error Low Power Operates on Single +5 V to +13 V Power Supplies 4 mA/Amplifier Max Power Supply Current High Speed 140 MHz Unity Gain Bandwidth (3 dB) Fast Settling Time of 18 ns (0.1%) 1000 V/µs Slew Rate High Speed Disable Function per Channel Turn-Off Time 30 ns Easy to Use 95 mA Short Circuit Current Output Swing to Within 1 V of Rails

160 MHz Rail-to-Rail Amplifier with Disable Features: Fully specified for +3 V, +5 V and ±5 V Supplies Output Swings Rail to Rail Input Voltage Range Extends 200 mV Below Ground No Phase Reversal with Inputs 1 V Beyond Supplies Disable/Power-Down Capability Low Power of 5.2 mA (26 mW on 5 V) High Speed and Fast Settling on 5 V: 160 MHz -3 dB Bandwidth (G = +2) 160 V/µs Slew Rate 30 ns Settling Time to 0.1% Good Video Specifications (RL = 150 Ω, G = +2) Gain Flatness of 0.1 dB to 30 MHz 0.03% Differential Gain Error 0.03° Differential Phase Error Low Distortion -69 dBc Worst Harmonic @ 10 MHz Outstanding Load Drive Capability Drives 50 mA 0.5 V from Supply Rails Cap Load Drive of 45 pF

Triple Differential Receiver with Adjustable Line Equalization Features: Compensates cables to 300 meters for wideband video Fast rise and fall times 4.9 ns with 2 V step at 150 meters of UTP cable 8.0 ns with 2 V step at 300 meters of UTP cable 55 dB peak gain at 100 MHz Two frequency response gain adjustment pins High frequency peaking adjustment (VPEAK) Broadband flat gain adjustment (VGAIN) Pole location adjustment pin (VPOLE) Compensates for variations between cables Can be optimized for either UTP or coaxial cable DC output offset adjust (VOFFSET) Low output offset voltage: 24 mV Compensates both RGB and YPbPr Two on-chip comparators with hysteresis Can be used for common-mode sync extraction Available in 40-lead, 6 mm × 6 mm LFCSP

Low Cost 270 MHz Differential Receiver Amplifier Features: High Speed AD8130: 270 MHz, 1090 V/µs @ G = +1 AD8129: 200 MHz, 1060 V/µs @ G = +10 High CMRR 94 dB min, dc to 100 kHz 80 dB min @ 2 MHz 70 dB @ 10 MHz Low noise AD8130: 12.5 nV/√Hz AD8129: 4.5 nV/√Hz High input impedance: 1 MΩ differential Input common-mode range ±10.5 V Low distortion, 1 V p-p @ 5 MHz: AD8130, -79 dBc worst harmonic @ 5 MHz AD8129, -74 dBc worst harmonic @ 5 MHz User-adjustable gain No external components for G = +1 Power supply range +4.5 V to ±12.6 V Power-down

Triple Differential Driver for Wideband Video Features:Triple high speed fully differential driver700 MHz, 3 dB, 2 V p-p bandwidth (AD8146/AD8148)600 MHz, 3 dB, 2 V p-p bandwidth (AD8147)200 MHz, 0.1 dB, 2 V p-p bandwidth3000 V/s slew rate Fixed gain (AD8146/AD8147: G = 2, AD8148: G = 4) Differential or single-ended input to differential output Can be used as differential-to-differential receiver Drives one or two 100 UTP cables Adjustable output common-mode voltage (AD8146) Internal common-mode feedback network Output balance error 50 dB @ 50 MHz On-chip, sync-on common-mode encoding (AD8147/AD8148) Output pull-down feature for line isolation Low power: 57 mA @ 5 V for 3 drivers (AD8146) Wide supply voltage range: +5 V to 5 V Available in a small 4 mm 4 mm LFCSP

High Voltage, Current Shunt Monitor Features: ±4000 V HBM ESD High common-mode voltage range −2 V to +65 V operating −3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead SOIC_N: −40°C to +125°C Excellent ac and dc performance 6 μV/°C typical offset drift −8 ppm/°C typical gain drift 120 dB typical CMRR at dc Qualified for Automotive Applications

Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

4-Channel 200 kSPS, 12-Bit A/D Converter with Sequencer in 16-Lead TSSOP Features: Fast throughput rate: 200 kSPS Specified for AVDD of 2.7 V to 5.25 V Low power 3.6 mW max at 200 kSPS with 3 V supply 7.5 mW max at 200 kSPS with 5 V supply 4 (single-ended) inputs with sequencer Wide input bandwidth 70 dB Min SNR at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI® -/QSPI™-/ MICROWIRE™-/DSP-compatible Shutdown mode: 0.5 μA max 16-lead TSSOP package Qualified for automotive applicationsAD7923-EP supports defense and aerospace applications (AQEC standard) Download AD7923-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/12647 DSCC Drawing Number

ADI

ADI